
Hydraulically actuated diverter chutework allows multi-feature deck selection, blending and by pass. Calibration chute for sampling verifies that the mix-design spec requirement is correct. Screen service platforms are positioned on both sides of the screens for ease of maintenance. Available side-discharge conveyor from crusher may be used for stockpiling or returned to another conveyor for re-circulating back to the plant screen for resizing. Ability to utilize system for screening only, all material is conveyed to stockpile.
- UM-25 impactor with a 6x20 screen is designed for 600TPH drum mix plant.
- Easily allows you to switch from top to base material production from control house.
- Produces highly uniform cubicle spec product with a minimum of white rock and a minimum of fines.
- Actuated chutework allows options for the raw feed material to be: retained on the top screen deck to be crushed; retained on the top and middle screen deck to be crushed; diverted to either the top or middle screen deck; or, all the screen decks may be diverted from the crusher to stockpile.
- Service friendly design: Screening process can continue while crusher is removed from circuit. Screen chute system folds out of the way for ease of changing screen cloth. Screen service platforms are positioned on both sides of screen for ease of maintenance.
- Hydraulic lift and leveling system enables quick set up and tear down by using the hydraulic run-on legs.
- ncludes removable electrical control panel featuring pre-wired receptacles for radial stackers.
Fill out the form below to request more information about MaxRap 25 Portable