Planers & Milling Machines

13b19696f2e8b3b0206e45fd3dbb2521
BOMAG Ion Dust Shield Helps Contractor Stay Compliant
OSHA's Silica Dust Rule heavily impacts milling contractors and manufacturers are working to make equipment that helps operators stay safe and compliant
August 10, 2020
With OSHA's new Silica Rule for roadway construction activities now being enforced, companies engaged in roadway construction must be aware of the potential for exposure to silica associated with common roadway construction activities, mitigation strategies and technologies, and reporting, monitoring and other regulatory obligations.
How Milling Contractors Can Comply with OSHA’s Silica Dust Rule
June 30, 2020
Steel cables attached to a wheel loader secured the Wirtgen cold milling machines.
Wirtgen Cold Milling Machines Solve Big Challenge at Oroville Dam
May 6, 2020
Img 0342
BOMAG BM 2500/75 Milling Machine
March 13, 2020
190328 Bm 15 2 1
BOMAG BM 500/15-2 & BM 600/15-2 Compact Milling Machines
March 13, 2020
Img 0302
[VIDEO] Roadtec RX-405 Milling Machine with All New Variable Cutter System
March 12, 2020
Recommended
Highway Construction 5e16546fd77f5
House Approves Continuing Resolution that Funds Highway Bill through 2021
The House of Representatives approved by a 359-to-57 vote a resolution that would fund federal government programs beginning through December 11, and extend surface transportation funding legislation through fiscal 2021
September 24, 2020
Maxresdefault 5f6b941f51f09
Soil to Stadium Time-Lapse: Raiders' Allegiant Stadium in 3 Minutes
Time-lapse video details 32 months of construction of the Las Vegas Raiders new home, Allegiant Stadium, highlighting unique features of the domed stadium that make it an architectural and engineering marvel
September 23, 2020
Adobe Stock 189934147
We Need to Talk About Suicide in the Construction Industry
An often-overlooked part of workplace safety is mental health; and as the leading occupation for death by suicide, it is time to take psychological safety in the construction industry seriously.
September 10, 2020
Latest
Img 0225
[VIDEO] Roadtec Milling Machines Can Recycle Mix In-Place with CIR Package
Both the RX-700e/ex and RX-900e/ex milling machines can be equipped with bolt-on packages that allow them to be used for Cold-In-Place Recycling (CIR).
March 11, 2020
Img 0218
[VIDEO] Roadtec Rx505e Milling Machine Helps Keep Workers Safe
Rear object detection on the RX-505e Cold Planer is designed to stop the mill if a person or object is detected behind the machine while it is in reverse.
March 11, 2020
Rx405 jpg
Roadtec RX-405 Cold Planer
The RX-405 is designed to cut variable widths of 2 to 5 feet, and cuts up to 13” deep. It is perfectly balanced for smooth elevation changes while cutting.
March 10, 2020
81734941 4014354531924101 3264666768391536640 O
Report: OSHA Intends to Target Roadway Construction Activities for Silica Exposure
According to OSHA's National Emphasis Program, OSHA intends to target roadway construction activities, specifically milling activities, to identify and reduce worker exposure to silica dust.
February 17, 2020
The BOMAG/Fayat 17,200 ft2 Central Hall exhibit #C30316 will feature more than 10 new products, including path and highway pavers, half-lane mills, single drum and tandem vibratory rollers with alternative drive systems and vibratory plate compactors.
BOMAG Announces CONEXPO 2020 Exhibit Plans
The company will unveil 10 new pieces of equipment with a focus on innovations surrounding the environment, safety and technology
January 23, 2020
Img 0092
Wirtgen W 220 Fi and W 250 Fi Large Milling Machines Premiere at CONEXPO 2020
January 7, 2020
Mastic One ® —The Benchmark of Quality, Performance and Versatility.
Sponsored
Mastic One ® —The Benchmark of Quality, Performance and Versatility.
A hot-applied, pourable repair material; Mastic One® requires no compaction and provides a seal that is air-tight, waterproof and flexible.
September 24, 2020
Img 4548
BOMAG 2200/60 Cold Planer
BOMAG reintroduces its field-proven 600-hp-class BOMAG 2200/60 cold planer with a Tier 4 Final engine and multiple productivity enhancing design advancements
October 29, 2019
https://s3.amazonaws.com/creative.acbusinessmedia.com/ACON/managing-your-rap/index.html
Managing Your RAP from Start to Finish
With the increase in the amount of recycled asphalt pavement (RAP) used in modern mix designs, good RAP management practices need to be deployed across the entire production and paving process
October 7, 2019
A Wirtgen W 150 CF compact milling machine was taksed with milling 15 miles of one of Mexico's most important economic and industrial centers.
Wirtgen Milling Machine Tackles Entire Mexican Road Pavement in One Pass
A Wirtgen W 150 CF compact milling machine with an extended drum assembly was the unit of choice to mill 15 miles of road for Mexico's new Bus Rapid Transit system
October 28, 2019
Img 7252 583499731bcc1
[INFOGRAPHIC] What Size Milling Machine Do You Need?
Whether you’re a dedicated milling contractor or a paving contractor looking to bring this service in-house, there are many things to consider before making a purchase. This infographic can help.
September 27, 2019
Caterpillar Pm822 Cold Planer 5d85070ef2126
Caterpillar Makes Engine, Other Updates to Cold Planers
Engine updates to the Caterpillar half-lane cold planers increase power and lower maintenance costs.
September 23, 2019
In this area, the Wirtgen milling machine was operating with a high milling drum speed and a high advance rate.
Wirtgen W 200 Cuts Milling Time in Half on Resurfacing Project in the Alps
A 1.5-in.-thick surface course needed to be renewed across the entire width along a 6-mile section of road in Italy
September 23, 2019
Renken brings 20 plus years of construction equipment sales, business development and sales management experience to this position.
BOMAG Appoints Cole Renken Vice-President of Sales & Marketing
Renken will be responsible for developing and executing short and long-term growth strategies to better optimize the sales and customer support for our dealer and rental channel partners.
June 25, 2019
WITOS FleetView gets the machines of WIRTGEN, VÖGELE and HAMM communicating: every unforeseen fault, along with every upcoming service interval, is displayed in the WITOS FleetView web application.
WITOS FleetView Helps Improve Fleet Management
This telematics solution records operating, position and maintenance data from Vögele, Wirtgen and Hamm machines, increasing fleet availability as a result.
March 26, 2019
Capture
[VIDEO] Caterpillar Product Expert Discusses K Series Milling Rotor
A.J. Lee with Caterpillar Inc. discusses the new K System for mills.
February 18, 2019
Cm20181017 51966 04184
Caterpillar K System Milling Drum
February 18, 2019
Maxresdefault 5c656192c6aee
[VIDEO] Roadtec Updates RX-700e Cold Planer with More Power & Reporting Capabilities
The upgraded RX-700e cold planer features the increased power of an 800-hp Caterpillar engine. The new Tier 4 Final engine does not require DEF fluid as a component of the after-treatment system, reducing the operation costs typically required at this emi
February 14, 2019
Mastic One ® —The Benchmark of Quality, Performance and Versatility.
Sponsored
Mastic One ® —The Benchmark of Quality, Performance and Versatility.
A hot-applied, pourable repair material; Mastic One® requires no compaction and provides a seal that is air-tight, waterproof and flexible.
September 24, 2020
W Photo W150 C Fi 00659 Hi
Wirtgen W 150 CFi Compact Milling Machine
New 1,800 mm milling drum option extends 46,000-lb. mill's capacity to take on surface-course rehabilitation for medium to large job sites
January 8, 2019
Site Manager Cleiton Farias de Jesus also appreciates the eco-friendly technologies of the W 200. They play a key role in ensuring that his company meets the ISO 14001 Environmental management standard.
Wirtgen W 200 Milling Machine Rehabilitates Brazil's Congested Road Network
Wirtgen W 200 large milling machine ran in continuous operation 24 hours a day during the rehabilitation work of two main Brazil traffic arteries
October 22, 2018
Cat Excavator Bauma China
Caterpillar to Reveal Range of New Machines at Bauma China 2018
Caterpillar will display 30 machines as well as work tools, engines and product support in Shanghai November 28 – 30
October 5, 2018
Pm620 Virginia Small
What to Know Before Buying a Milling Machine
More decisions go into the purchase of this piece of equipment over any other
October 1, 2018
Beginning a night of cold milling in congested downtown Merritt Island, FL, Blackrock Milling cuts multiple passes 7 ft. 3 in. wide using its Wirtgen W 210i.
Advanced-design Cold Mill Makes Quick Work of Urban Avenue
Blackrock Milling finds a versatile solution in its fleet of Wirtgen asphalt cold mills.
August 13, 2018
Maxresdefault 5aa68db24596f
[VIDEO] NeSilex Helps Asphalt Contractors Comply with OSHA's Silica Dust Rule
March 12, 2018
Cmi Roto Mill Rm 6 3
CMI RM-6 Roto-Mill Cold Planer
March 5, 2018
This project was over $800,000 cheaper than the alternative thick mill and overlay, representing a cost savings of over 36%.
Minnesota Metro District Saves $800,000 Using 100% RAP
The greater Minneapolis area used cold in-place recycling for the first time in more than 30 years on Hwy 110, saving both time and money
February 5, 2018
Rx 600 Img 2260
Roadtec Auto Cut Precision Milling Technology
Auto Cut allows milling machine operators to easily raise the mill, walk over obstacles, walk back into the cut and resume milling at same depth, without reprogramming or delay
January 29, 2018
02c Cold Milling
BOMAG BMS 15 Milling Tooth
The BOMAG BMS 15 milling tooth design extends service live by 30%, Reduces change-out time by up to 75% over conventional systems
January 3, 2018
Pm312 2
Caterpillar PM300 Series Cold Planers
The PM300 Series is ideal for small-to-medium job sites where compact dimensions, optimum maneuverability and high production capabilities are required.
December 20, 2017