Search: Page 5

162 Results
Type: Article
Section: Pavement Maintenance > Blacktop > Milling
Seal Coating
Cold Mills Help Delta Grinding Salvage Smoothness Bonus
A California milling subcontractor uses its new Wirtgen cold mills to help its paving prime contractors meet new Caltrans smoothness specs and win bonuses
November 4, 2013
Dsc 0110 11221618
Equipment
Rough 15-Mile Stretch Milled and Repaved
Clark Construction uses advanced paving techology to save time, money & personnel on U.S. 281 project
October 31, 2013
The project called for milling a 15-mile stretch of U.S. Highway 281 to a 2-in. depth, then placing 2 in. of new asphalt, all within a two-month period.
Equipment
Superior Asphalt Uses Growing RAP Industry, Mobile Crushing Plant to Increase Production
This Mississippi asphalt company now produces approximately 1 million tons of asphalt per year, with about 90 percent of that being used for re-paving state highways
August 8, 2013
Rds 15 11080488
Seal Coating
Cold Mills Fit Narrow Streets of San Francisco
Updated technology helps contractor in tight quarters
August 1, 2013
01 Absl W 210 San Francisco Wi 11076585
Equipment
Showcase & Buyer's Guide 2014
July 31, 2013
Acon 1 Cover0814 L
Seal Coating
Technology Helps Oregon Mainline Paving Save Time and Money
Company uses 50% less worker hours, 50% less machine time and 50% less costs during the milling and repaving of 19 miles on I-84 in Oregon
July 17, 2013
Img 0004 11004020
Seal Coating
Road to Success
Volvo MT2000 helps C & H Paving branch into a new segment
April 11, 2013
Preservation C H Contracting 10931878
Equipment
Roadtec Offers New Line-up of Equipment
The new generation of Roadtec machines arrives with a slight change in terminology used to classify each model
April 2, 2013
RX-600e/ex Milling Machine
Seal Coating
Milling Up Missouri
APAC rents BOMAG milling machine from Van Keppel for road repair blitz
March 13, 2013
During its primary job, the milling machine removed approximately 10,000 tons of asphalt, which the company, in turn, was planning to use for general fill material at another location.
Equipment
New Hampshire DOT Turns to Micro Surfacing
The treatment is currently one preservation option in the state’s Pavement Management System
February 12, 2013
In 2006, the New Hampshire Department of Transportation began researching the benefits of microsurfacing. Several aspects of a project are considered before microsurfacing is selected as the pavement preservation method including traffic volume, climate and pavement condition.
Milling
What You Need to Know about Updates to Milling Machines
Experts from Roadtec, Wirtgen America and Terex Roadbuilding discuss the silica issues and how it affects your equipment
December 2, 2012
The basic configuration of the Wirtgen milling machine starts with a cutter drum inside the cutter housing where the asphalt is milled up, and that drum is constructed so the millings are augured to the center of the housing where it is ejected through a window onto a conveyor.
Paving
All in a Weekend’s Work
Hybrid laser-satellite automated grade control system holds milling and paving grade, as well as cross-slopes, on fast-track South Carolina interstate project
September 27, 2012
The first lifts of new asphalt were staggered and then the Millimeter GPS+ was used for joint-matching. Banks Construction saved an estimated $70,000 on milling and paving by using the automated grade control system on the project.
Seal Coating
How Nashville Preserves its Pavement
Willingness to test new materials, dedication to preservation drive Donald Reid’s program to preserve Nashville roads
August 15, 2012
Donald Reid says that when he does approve a test for Nashville he usually does it in conjunction with the Tennessee DOT. “It’s really a joint effort because it’s easier for me to find a road to put something down on that it is for the state, and we both benefit from whatever we learn from the test,” he says.
Equipment
Midwest Stabilization Uses Full Depth Reclamation for 15 Percent Savings
Reduces labor, materials and trucking
August 14, 2012
After milling off 3-4 inches of the existing surface, Midwest Stabilization used a Wirtgen 2400 reclaimer to till the cement into the surface.
Seal Coating
Telematics System Diagnoses Problems Quickly
Roadtec’s new remote diagnostics system can quickly find any problem
August 2, 2012
Rx 600e 13dr3505 10754687
Seal Coating
Taking a Look at Pavement Preservation
ISSA President Doug Ford discusses the pavement preservation industry
March 22, 2012
Doug Ford, president of the International Slurry Surfacing Association
Seal Coating
Kansas Company Expands Into Milling
Sunflower Paving Inc., a full-service paving company with locations in Lawrence, Topeka, and Kansas City, was originally founded as a flatwork company 30 years ago. Gradually, Sunflower Paving expanded its concrete division into other facets of commercial concrete, including everything related to horizontal concrete, such as public and private work on curbs, sidewalks, paving and handicap ramps.
March 20, 2012
Sunflower's new milling machine is used on asphalt projects, including full-depth patching on streets, city street milling and overlay projects, and county and state highway milling and overlays.
Milling
Surf Prep Shot Blasts Wacker Drive
January 2, 2012
SurfPrep, located in Waukesha, WI, used only one Blastrac 2-4800-DH unit to shot blast 120,000 sq. ft. of concrete, separated into two phases, on Chicago's Wacker Drive.
Previous Page
Page 5 of 9
Next Page