Vanair Manufacturing

Michigan City, IN 46360

Company Details
10896 West 300 N.
Michigan City, IN 46360
USA
http://www.vanair.com
Phone:219-879-5100
Toll Free:800-526-8817
Fax:219-879-5800
Articles & News
Over-the-air updating allows work trucks and other equipment to be updated when new software or capabilities are available.
Work Truck OEMs Face the Challenges of Climate Change Prevention & Technology Integration
With increasing emission regulations for diesel equipment, moves toward fuel options and more telematics and technology, work truck OEMs face many challenges.
December 1, 2023
The Equipment Today team got to operate the EC230 electric excavator.
Post-Show Report From The Utility Expo 2023
At the largest show in history, the utility industry gathered for education, equipment and networking.
October 12, 2023
Underhood air compressors provide air on demand and do not require an air receiver tank. Image source: VMAC
Onboard Power Play: Match Air Compressors to the Application and Vehicle
Sort through onboard air compressor options to pick the right solution for your operations.
October 12, 2018
Above-deck compressors are the most popular with mechanic’s trucks since there is already room on the side pack, you can choose between rotary screw or reciprocating piston to meet air demands and they can be driven by either self-contained engines or vehicle hydraulics.
Tips to Outfit Trucks with Onboard Air
Over- or under-spec’ing onboard air compressors impacts up-front costs and productivity.
December 14, 2015
Pressure From Above or Below?
Understand your requirements to find the right truck-mounted compressor match.
April 22, 2010
Select the Best Compressor Drive Option
Drive options for truck-mounted air compressors are often dictated by other equipment already mounted on the truck.
April 22, 2010
Products & Press Releases
Vanair’s three new adapter kits now make the Start•AllJump•Pack an all-purpose jump-starting tool, particularly for fleets with a mix of both specialized and traditional vehicles.
Vanair Launches Adapter Kits for Start•All Jump•Pack 12/24V
Vanair’s three new adapter kits now make the Start•AllJump•Pack an all-purpose jump-starting tool, particularly for fleets with a mix of both specialized and traditional vehicles.
March 11, 2024
The PTO Shaft-Driven Underdeck ALL-IN-ONE Power System features a 125-185 cfm rotary screw air compressor, 10 kW generator, 330-amp welder, 12V-24V-36V battery boosting, 12V-24V-36V battery charging and up to 30 gpm @ 2,000 psi of hydraulic-driven power.
Vanair Offers PTO Shaft-Driven ALL-IN-ONE Underdeck Power System
The PTO Shaft-Driven Underdeck ALL-IN-ONE Power System features a 125-185 cfm rotary screw air compressor, 10 kW generator, 330-amp welder, 12V-24V-36V battery boosting, 12V-24V-36V battery charging and up to 30 gpm @ 2,000 psi of hydraulic-driven power.
October 11, 2023
The EPEQ Idle Management system allows vehicles to be automatically turned off while still powering equipment like air compressors at the jobsite.
Vanair Launches EPEQ Idle Management System
The EPEQ Idle Management system allows vehicles to be automatically turned off while still powering equipment like air compressors at the jobsite.
October 10, 2023
Designed for water-well, oil and gas, geothermal, blasthole drilling and more, the drill modules are available with either an integral shaft drive or hydraulic drive cooling system.
Vanair Single-stage DR 500 and DR 500HF Drill Modules
Designed for water-well, oil and gas, geothermal, blasthole drilling and more, the drill modules are available with either an integral shaft drive or hydraulic drive cooling system.
April 27, 2023
During use, the drill module generates 600 cfm and 250 psi capable of supporting a 4-in. hammer drill.
Vanair Single-stage DR 600XP Drill Module
During use, the drill module generates 600 cfm and 250 psi capable of supporting a 4-in. hammer drill.
April 26, 2023
Equipped with a remote separator tank for versatile mounting and accessible maintenance, the DR 435 is designed for water-well, oil and gas, geothermal and blasthole drilling applications.
Vanair Single-stage DR 435 Drill Module
Equipped with a remote separator tank for versatile mounting and accessible maintenance, the DR 435 is designed for water-well, oil and gas, geothermal and blasthole drilling applications.
April 24, 2023
Videos & Resources
Maxresdefault 5d9df26cb2ef2
[VIDEO] Vanair's New Separator Tank Updates Design with Integrated Manifolds and Redundancies
Vanair has ventured away from traditional tank design and introduced a new design with integrated manifolds as well as technology advancements to minimize downtime and improve maintenance
October 9, 2019
Request More Information
Fill out the form below to request more information about Vanair Manufacturing
More from Vanair Manufacturing
Vanair’s three new adapter kits now make the Start•AllJump•Pack an all-purpose jump-starting tool, particularly for fleets with a mix of both specialized and traditional vehicles.
Vanair Launches Adapter Kits for Start•All Jump•Pack 12/24V
Vanair’s three new adapter kits now make the Start•AllJump•Pack an all-purpose jump-starting tool, particularly for fleets with a mix of both specialized and traditional vehicles.
March 11, 2024
Over-the-air updating allows work trucks and other equipment to be updated when new software or capabilities are available.
Work Truck OEMs Face the Challenges of Climate Change Prevention & Technology Integration
With increasing emission regulations for diesel equipment, moves toward fuel options and more telematics and technology, work truck OEMs face many challenges.
December 1, 2023
The Equipment Today team got to operate the EC230 electric excavator.
Post-Show Report From The Utility Expo 2023
At the largest show in history, the utility industry gathered for education, equipment and networking.
October 12, 2023
The PTO Shaft-Driven Underdeck ALL-IN-ONE Power System features a 125-185 cfm rotary screw air compressor, 10 kW generator, 330-amp welder, 12V-24V-36V battery boosting, 12V-24V-36V battery charging and up to 30 gpm @ 2,000 psi of hydraulic-driven power.
Vanair Offers PTO Shaft-Driven ALL-IN-ONE Underdeck Power System
The PTO Shaft-Driven Underdeck ALL-IN-ONE Power System features a 125-185 cfm rotary screw air compressor, 10 kW generator, 330-amp welder, 12V-24V-36V battery boosting, 12V-24V-36V battery charging and up to 30 gpm @ 2,000 psi of hydraulic-driven power.
October 11, 2023
The EPEQ Idle Management system allows vehicles to be automatically turned off while still powering equipment like air compressors at the jobsite.
Vanair Launches EPEQ Idle Management System
The EPEQ Idle Management system allows vehicles to be automatically turned off while still powering equipment like air compressors at the jobsite.
October 10, 2023
Designed for water-well, oil and gas, geothermal, blasthole drilling and more, the drill modules are available with either an integral shaft drive or hydraulic drive cooling system.
Vanair Single-stage DR 500 and DR 500HF Drill Modules
Designed for water-well, oil and gas, geothermal, blasthole drilling and more, the drill modules are available with either an integral shaft drive or hydraulic drive cooling system.
April 27, 2023
During use, the drill module generates 600 cfm and 250 psi capable of supporting a 4-in. hammer drill.
Vanair Single-stage DR 600XP Drill Module
During use, the drill module generates 600 cfm and 250 psi capable of supporting a 4-in. hammer drill.
April 26, 2023
Equipped with a remote separator tank for versatile mounting and accessible maintenance, the DR 435 is designed for water-well, oil and gas, geothermal and blasthole drilling applications.
Vanair Single-stage DR 435 Drill Module
Equipped with a remote separator tank for versatile mounting and accessible maintenance, the DR 435 is designed for water-well, oil and gas, geothermal and blasthole drilling applications.
April 24, 2023
Designed for maintenance when mounted on the vehicle, this drill module provides 310 cfm and 200 psi of air power.
Vanair Single-stage DR 310 Drill Module
Designed for maintenance when mounted on the vehicle, this drill module provides 310 cfm and 200 psi of air power.
April 21, 2023
This machine is equipped with several multi-functioning capabilities including up to 60 cfm of air power, 10,000W of AC electric power, battery booster and battery charger.
Vanair Air N Arc 330 Diesel Generator Power System
This machine is equipped with several multi-functioning capabilities including up to 60 cfm of air power, 10,000W of AC electric power, battery booster and battery charger.
April 19, 2023
With a lifespan of five to seven years, the ELiMENT LFP battery can be fully cycled at least 5,000 times.
Vanair ELiMENT LFP Battery Portable Power Solution
With a lifespan of five to seven years, the ELiMENT LFP battery can be fully cycled at least 5,000 times.
March 13, 2023
Ana 5 (002)
Vanair and Lincoln Electric Collaborate on New All-in-one Power System
First collaborative solution announced at Work Truck Week 2022 in Indianapolis, IN.
March 14, 2022
EPEQ Air 20 electric motor-driven air compressor
Vanair to Electrify Onboard Power with EPEQ Electrified Power Equipment
Available in 2022, EPEQ is a comprehensive, end-to-end system of zero emission and clean, quiet Electrified Power Equipment products.
October 13, 2021
Vanair Reliant RS85 with digital gauges
Vanair Aluminum Reliant RC40-L and RS85
Aluminum canopy and air end reduce weight by up to 40% over the standard models
March 20, 2020
Vanair Air N Arc 250 Light Product Image
Vanair Aluminum AIR N ARC 250-L
Weighs 30% less than the standard steel model yet still offers the functionality of five units in one machine
March 18, 2020
Vanair Air N Arc 150 Diesel Product Image
Vanair Air N Arc 150 Diesel All-In-One Power System
Includes a 20-cfm reciprocating air compressor, 5-kW generator, 150-amp high-frequency 100% duty-cycle DC welder, 190-amp battery booster and battery charger
October 18, 2019
Maxresdefault 5d9df26cb2ef2
[VIDEO] Vanair's New Separator Tank Updates Design with Integrated Manifolds and Redundancies
Vanair has ventured away from traditional tank design and introduced a new design with integrated manifolds as well as technology advancements to minimize downtime and improve maintenance
October 9, 2019
Vanair Separator Tank Air Side View
Vanair Integrated Separator Tank
Features integrated manifolds containing a minimum pressure valve, thermo-valve, thermistors, transducers, pressure regulators, oil filter and ultrasonic oil level sensors
October 8, 2019
Vanair Donnie Semi Truck Jump Pack 10 K
Vanair Start-All Lithium-Ion Jump Starters by Goodall Mfg.
Four models available to instantly jump start anything from small engines to large heavy-duty 16-liter commercial-grade diesel engines
May 23, 2019
Vanair Capstart 3000 A 12 24 V
Cap-Start 3000 Recharges Vehicle Capacitors
Innovative Vanair Super Capacitor works with a self-contained alternator on the unit to start the vehicle and recharge the capacitor instantaneously
March 5, 2019
Underhood air compressors provide air on demand and do not require an air receiver tank. Image source: VMAC
Onboard Power Play: Match Air Compressors to the Application and Vehicle
Sort through onboard air compressor options to pick the right solution for your operations.
October 12, 2018
Larry Marth, Vanair engineering drafter
Vanair Adds New Engineering Drafter
Larry Marth's responsibilities will include creating 3D CAD drawing files to electronic files, generate diagrams and schematics, and more
May 22, 2018
Jonathan Kokot, Vanair Director of Service, Warranty and Training
Vanair Hires New Director of Service, Warranty and Training
Jonathan Kokot will be responsible for the day to day direction, supervision and overall management of the Service, Warranty and Training departments
May 11, 2018
Gabby Gearheart, Vanair engineering drafter
Vanair Adds Two New Hires to Engineering Department
Vanair hires Gabby Gearheart as engineering drafter and Marcus Thoreson as new senior design engineer
May 8, 2018