Carol Brzozowski

Carol Brzozowski, freelance journalist

Carol Brzozowski, freelance journalist

Carol Brzozowski is a freelance writer covering the construction and related industries.

Should You Waterproof Spray Your Work Jacket?

In the event a work jacket does not have proper water repellent features, it is possible to apply waterproofing products to provide that desired protection.

What to Wear on a Construction Site during Spring

The spring season calls for wearing breathable layers enabling a construction worker to adjust to the fluctuating temperatures and precipitation and allow sweat to evaporate.

Are Heated Socks Effective?

The warmth in heated socks is generated through built-in heating elements usually made of conductive material such as carbon fiber, which start to warm the feet once they are activated.

Buying Winter Work Gloves? Read This First

Some gloves on the market come with a cold rating indicating under what temperatures the gloves can best operate.

Jobs that can rack up 10,000 hours on a diesel machine might add 6,000 hours or 7,000 hours to a comparable electric machine.

Challenges & Benefits of Moving to Electric Equipment

As emission regulations tighten, construction equipment power sources will evolve, but adoption will be gradual.

Choose This Type of Eyewear to Prevent Snow Blindness

Some eyewear have anti-reflective coating designed to help minimize reflections and glare on the inside surface of the lenses, leading to visual clarity and comfort when working in bright, snowy conditions.

What are Base Layer Pants?

Base layer pants are designed to keep the body warm by trapping heat close to the skin and maintaining dryness by wicking away moisture.

Why You Should Avoid Cotton Workwear during Winter

Unlike wool or synthetic fabrics, cotton easily absorbs moisture through sweat and precipitation.

Product Review: Truewerk Workwear for Women

We tested the following Truewerk gear for women: B2 Quarter Zip, T2 WerkPants and T-1 Overalls. See if these products are right for you in this article.

How Often Should You Wash Your Winter Work Jacket?

In considering cleaning frequencies, a construction worker must strike a balance between keeping a winter work jacket clean and putting it through too many wash and dry cycles, resulting in the reduction of the effectiveness of water repellency or insulat

Road Widener offers the Offset Vibratory Roller, designed for easy operation without the need for extensive training.

Alternative Power, AI & Remote Control in Roadbuilding

The demand for quicker delivery and increased sustainability on projects has placed a heightened focus on the need for large-scale digital transformation in roadbuilding operations.

Waterproof Hoodie vs. Long-sleeve Shirt

Long sleeve shirts can be worn as a base layer to which additional clothing layers can be added as needed.

Choosing a Hard Hat Liner for Maximum Protection from Cold Weather

According to a British Medical Journal report, a measured 10 percent of total heat loss occurs from the head.

Addressing Trench Foot Symptoms with Rubber Boots

Trench foot is a condition that may occur after wearing wet socks and boots when feet are cold and wet for a long period of time.

Telematics and data management can assist contractors, operators and rental shop owners.

Tech Advances Productivity, Sustainability & Safety

Telematics and data management are more common and critical to operations on today’s jobsites.

When Should You Use Knee Pads on the Jobsite?

Tasks involving frequent stooping, kneeling, or squatting puts a construction worker’s knees at risk for injury, as noted by the Oregon Occupational Safety and Health Administration (OSHA).

Do Breathable Work Pants Keep You Warm on the Jobsite?

As the cold weather sets in, it might be a good idea to choose thicker outerwear.

What are Heated Gloves?

The winter work gloves are equipped with heating elements typically powered by batteries which generate heat to keep hands warm in cold jobsites.

Two timeless key factors in the safe use of construction site tools is choosing the right tool for the job, as well as making sure the tools are in good condition before use.

The Sharpest Tools in the Toolbox

Preventive maintenance tracking for everything from cranes to circular saws is the best way to not only make jobsites safer, but also to cut down on unexpected delays for emergency repairs.

Which Hi-vis Hoodie Pattern is Most Effective for Safety?

In comparing high visibility hoodie patterns, a construction worker must consider specific job requirements as well as personal comfort preferences.

Consider These Factors When Choosing Women's Work Pants

OSHA notes women’s PPE – including pants – should be based upon female anthropometric (body measurement) data.

Look for These Features When Buying Rubber Work Boots

Essential features to consider in your purchase includes material, toe protection and safety standards.

What are Bib Overalls for Construction?

Adjustable shoulder straps and complete leg protection makes this workwear option ideal for fast-moving jobs and busy work areas.

Choosing Proper High-visibility Vest Classifications for Your Job

These ratings and classifications are designed to address specific types of work, operations or requirements on the jobsite.