The Husqvarna DM 200 Handheld Core Drill
Husqvarna Construction Products North America Inc.
Husqvarnaconstructionproducts 10073331

The Husqvarna DM 200 is a tough and versatile D-handle drill motor optimized for handheld drilling of holes from 1 - 3 in (25 - 80mm). Delivering top-class drilling performance in both wet and dry applications. The uncomplicated and sturdy design, all-around usability makes it an ideal part of any craftsman’s toolkit as well as for rental purposes. The Husqvarna DM 200's casing is made of sturdy impact-proof polyamide plastic with ball valve coupling for wet drilling, vacuum coupling for dry drilling, detachable front handle, wrenches, and user manual.


  • Wet & Dry DrillingThis all-around machine features a smart 2-in-1 solution for both water supply and vacuum extraction, enabled by a special sealing system design.
  • Ready for ConnectivityEquipped with built-in connectivity for communication with the Husqvarna Fleet Services™ system in your smartphone or laptop, enabling you to monitor the actual runtime and utilization rate, availability and location, service planning and fleet inventory.
  • Extremely DurableBuilt for years of rough handling and hard work in tough conditions, with oil-bath gear lubrication, aluminium gearbox casing and impact-proof polyamide plastic motor casing to save weight.
  • Intelligent Overload ProtectionBoth the operator and drill motor are protected by an overload clutch, while intelligent engine electronics automatically alerts the operator if the overload threshold is exceeded.
  • Two-Speed GearYou can easily adapt the spindle speed and torque to any drilling diameter between 1 - 3 in (25 - 80 mm) with the two-speed gear selector.\
  • Easy to LevelThe two integrated levels make it easy to enable exact horizontal and vertical working positioning.


  • Power: 2.3 hp (1.7 kW)
  • Output Power on spindle shaft, W: 1,200
  • Motor: 1-phase, electric
  • Weight: 11.5 lbs. (5.2 kg)
  • Length: 19 in. (488 mm)
  • Spindle thread: 1 1/4 in. (outer) 7 UNC, A-Rod | G 1/2 in. (inner)
  • Adapter for the U.S., to outer thread 5/8 - 11 UNC included in the package
  • 100-120V (50-60Hz)
  • Spindle speed idle, unloaded: 1,375 rpm (gear 1), 2,800 rpm (gear 2)
  • Spindle speed idle, loaded: 835 rpm (gear 1), 1,700 rpm (gear 2)
  • Drill diameter in concrete: 1 to 2 in. (25 to 50 mm, gear 1), 1.5 to 3 in. (40 to 80 mm, gear 2)

Available with the Following Accessories

  • Pressurized water tank
  • WT 15
  • Elite-Drill D 1210
  • Husqvarna W 250 P
  • Husqvarna S 13
  • Slurry rings
Request More Information
Fill out the form below to request more information about The Husqvarna DM 200 Handheld Core Drill