LBX Link-Belt X2 Series Excavators
- Isuzu Tier III turbocharged, air-to-air intercooler, four-valve OHC engines
- 10% increase in hydraulic horsepower
- Load-sensing automatic power boost
- Two-speed boom lifting and arm open/close functions
- Extreme Control technology for more responsive and precise joystick control
- SMART travel for simultaneous work and travel without significant power loss in any function
Terex TXC300 LC-2 Excavator
- Equipped with a Tier III-compliant engine utilizing a common rail injection system
- e-EPOS Electronic Power Optimizing System increases productivity by 4% and fuel efficiency by 6% by maximizing engine and hydraulic system efficiency
- Advanced self-diagnostic technology
- Attachment flow rate control
- Pattern change control
- Wider, roomier cab with automatic climate control
- Extended service intervals
Hitachi Zaxis 225US LC-3
- Fuel-efficient four-cylinder Tier III-certified engine
- E, P, and H/P engine modes
- Cab has a wider seatback, more legroom and more glass for improved visibility
- Multilingual LCD monitor provides maintenance, attachment and operational information
John Deere D-Series Full-size Excavators
- Faster hydraulic system boosts productivity up to 8%
- Undercarriage incorporates larger upper and lower rollers, strong idlers and thicker links
- Operating weights from 54,244 to 185,520 lbs.
- Bucket forces from 37,670 to80,703 lbs.
- 177- to 532-hp John Deere or Isuzu Tier III engines with hydraulically driven cool-on-demand fan
Case CX B Series Excavators
- 120- to 207-net-hp electronically controlled Tier III-certified engines
- 20% increase in fuel efficiency
- Hydraulic horsepower increased 4% to 10%
- 68.6-dBa noise level inside cab
- Seat adjusts independently of the joystick controls
- Stores up to 10 auxiliary hydraulic flow patterns
Kobelco Blade Runner Excavators
- Six-way power angle tilt dozer blade folds to allow an 8-ft. 6-in. transport width
- Standard curved track shoes
- Turbocharged engine with efficient, economic fuel injection
- Undercarriage includes sealed and lubricated track chain elements and rollers and oversized components
Volvo EW160C, EW180C
- Volvo Tier III-compliant engines with V-ACT (Volvo Advanced Combustion)
- 36,155- to 44,092-lb. operating weights
- 18.7- and 19.35-ft. maximum digging depths
- Intelligent hydraulics with boom, arm and swing priority
- Jobsite speeds up to 22 mph
- Dozer blade and wide gauge outriggers facilitate lifting, loading or grading
- Optional two-piece boom
Takeuchi TB1140
- Two-speed travel system that automatically shifts speeds as ground conditions change
- Provides a 21,188-lb. bucket breakout force, 18-ft. dig depth and 28-ft. 1-in. reach at grade
- Wide angle independent boom swing
- Standard heavy-duty dozer blade, emergency engine shutdown system and primary and secondary auxiliary hydraulics plumbed to the dipper arm
Doosan DX Series
- DX180, DX225 and DX255 crawler and DX140W, DX190W and DX210W wheeled excavators meet Tier III regulations
- Electronic package allows communication between the engine and hydraulics for optimum performance and fuel economy
- Convenient hose routing, wiring harness layout and filter placement
- Centralized grease points on the boom and arm
