National Paving Completes Prep Work

National Paving completed prep work at Pavement LIVE.

January 19, 2012

The paving demonstration location before National Paving got to work.

The paving demonstration location before National Paving got to work.

Every job site requires prep work, and that didn't change for the manufacturers demonstrating at Pavement LIVE in San Diego this past November. Prior to the paving demonstrations by Carlson Paving Products and Leeboy/Nixon-Egil, National Paving, located in Riverside, CA, completed the necessary prep work. The following photos captured National Paving on the job.

Steel cables attached to a wheel loader secured the Wirtgen cold milling machines.

Wirtgen Cold Milling Machines Solve Big Challenge at Oroville Dam

North of Sacramento, a W 210i and W 2100 precisely milled the spillway chute of the Oroville Dam, the highest dam in the US.

BOMAG BM 2500/75 Milling Machine

The high-production BM 2500/75 cold planer from BOMAH is the largest milling machine in the manufacturer’s line.

190328 Bm 15 2 1

BOMAG BM 500/15-2 & BM 600/15-2 Compact Milling Machines

Available in 3- and 4-wheel designs, the BOMAG BM 500/15-2 and BM 600/15-2 compact mills feature a reengineered vibration-isolated operator’s station that improves operator efficiency and productivity.

[VIDEO] Roadtec RX-405 Milling Machine with All New Variable Cutter System

The RX-405 has a center-mounted cutter drum with an all new variable cutter system (VCS) for easy change-out of the cutter drum

[VIDEO] Roadtec Milling Machines Can Recycle Mix In-Place with CIR Package

Both the RX-700e/ex and RX-900e/ex milling machines can be equipped with bolt-on packages that allow them to be used for Cold-In-Place Recycling (CIR).

[VIDEO] Roadtec Rx505e Milling Machine Helps Keep Workers Safe

Rear object detection on the RX-505e Cold Planer is designed to stop the mill if a person or object is detected behind the machine while it is in reverse.

Rx405 jpg

Roadtec RX-405 Cold Planer

The RX-405 is designed to cut variable widths of 2 to 5 feet, and cuts up to 13” deep. It is perfectly balanced for smooth elevation changes while cutting.

S100 Model 3 1a (002)

Dynapac S100 Mix Spreader

The two in one spreader/paver can be used as chip spreader when moving forward and a paver when in reverse.

Ticab Bpm 500

BPM500 Cracksealing Machine

TICAB's BPM500 is designed for heating and pouring sealant for repair and construction work on highways, airfields, parking lots and bridges.

Ticab 3

IR Heater MIRA-1 Infrared Heating System

TICAB's MIRA-1 is a two-unit foldable infrared heating system for repair of potholes, failed pavement joints, catch basins and more.

81734941 4014354531924101 3264666768391536640 O

Report: OSHA Intends to Target Roadway Construction Activities for Silica Exposure

According to OSHA's National Emphasis Program, OSHA intends to target roadway construction activities, specifically milling activities, to identify and reduce worker exposure to silica dust.

Logistically planning the mobilization of equipment, crews and materials across the waterways to reach the San Juan Islands was a challenge for VSS International.

Logistics Prove Challenging for Island Pavement Preservation Project

VSS International, Inc. completed pavement repair and a Type II slurry seal inside San Juan Island National Historic Park

The BOMAG/Fayat 17,200 ft2 Central Hall exhibit #C30316 will feature more than 10 new products, including path and highway pavers, half-lane mills, single drum and tandem vibratory rollers with alternative drive systems and vibratory plate compactors.

BOMAG Announces CONEXPO 2020 Exhibit Plans

The company will unveil 10 new pieces of equipment with a focus on innovations surrounding the environment, safety and technology

Wirtgen W 220 Fi and W 250 Fi Large Milling Machines Premiere at CONEXPO 2020

Bergkamp M310 E Tier 4 Paver

M310E Truck-mounted Slurry Seal and Micro Surfacing Paver

Bergkamp's M310E Tier 4 truck-mounted slurry seal and micro surfacing paver with EMCAD (Electronic Mix Control And Diagnostic) is developed from the original M210 paver but features PTO-driven hydraulic pumps, eliminating the side engine.

Contractor Indus employs a 2000-gallon Etnyre distributor to spray Delta Mist penetrating asphalt rejuvenator on a local street in historic Lexington, MA.

Historic Streets in Massachusetts Receive Fogseal Application to Preserve Pavement

Neighborhood near first battle site of the Revolutionary War is first in the state to undergo plant-based, benign chemistry, asphalt rejuvenating fog seal contracted by a municipal government

Sip104 Cover

NAPA to Release eBook on How to Develop an Asphalt Pavement Sustainability Program

The 50-page book will outline the components of a successful sustainability program, along with guidance for developing and implementing a sustainability plan, as well as for reporting on plan progress.

Ma4

Cimline MA4 Longitudinal Joint Sealing

Annotation 2019 11 04 100805

Cimline P3 Truck-Mounted Durapatcher

190328 Bm 15 2 1

BOMAG BM 500/15-2 & BM 600/15-2 Compact Cold Planers

BOMAG 2200/60 Cold Planer

BOMAG reintroduces its field-proven 600-hp-class BOMAG 2200/60 cold planer with a Tier 4 Final engine and multiple productivity enhancing design advancements

https://s3.amazonaws.com/creative.acbusinessmedia.com/ACON/managing-your-rap/index.html

Managing Your RAP from Start to Finish

With the increase in the amount of recycled asphalt pavement (RAP) used in modern mix designs, good RAP management practices need to be deployed across the entire production and paving process

A Wirtgen W 150 CF compact milling machine was taksed with milling 15 miles of one of Mexico's most important economic and industrial centers.

Wirtgen Milling Machine Tackles Entire Mexican Road Pavement in One Pass

A Wirtgen W 150 CF compact milling machine with an extended drum assembly was the unit of choice to mill 15 miles of road for Mexico's new Bus Rapid Transit system

Neal Manufacturing High Volume Vehicle 1

High-Volume Road Maintenance Vehicle

Neal Manufacturing, a division of Blastcrete Equipment LLC, offers the High-Volume Road Maintenance Vehicle for fast, precise sealcoat application, even with larger aggregate mixes.