BOMAG at World of Asphalt 2024

BOMAG had new machines and new tech on display at World of Asphalt 2024.

Bw 100 A De Bw 120 A De 426

Come and see all that BOMAG has to offer at World of Asphalt booth #2731

CR 1030 T

Cr 1030 T Picture 2

The modernized BOMAG CR 1030 T retains many of the legacy Cedarapids designs while incorporating an Independent Auger/Conveyor system with Outboard driven Augers, a new HMI Interface and a brand-new Front Mount screed. 

Still equipped with the Cummins engine, with 225 hp and a 14-ton hopper, this machine is ready to tackle any large jobsite. The Independent Auger Conveyor system helps with material control and flow, increasing efficiency at the job site. 

The operator console is now more organized as related functions for the machine are sectioned together. With a new 7-in. touchscreen and similar functions being close together, the operator can quickly locate relevant information.  

The CR 1030 T features a new Front Mount screed, the VERSA 20. The VERSA 20 provides infinitely variable paving widths from 10 ft. to 19 ft., with a maximum paving width of 23 ft. with bolt-on extensions. New hose routing designs improve screed system reliability in the field. The VERSA 20 will have the option for integrated BERM capability. 

Coming along with the new VERSA 20 is new screed controls with Integrated Moba Automation Displays as well. An updated control panel on the main screed and remotes on the extensions help the screed operator achieve the desired mat.

 BW 120 AD E-5 Tandem Roller

Bw 100 A De Bw 120 A De 429

The new, compact BOMAG BW 120 AD e-5 electric tandem roller introduces sustainable, low-noise and zero-emissions operation to the 2.5-ton class commercial roller market. With its 39.4-in (1,000 mm) rolling width, this powerful and versatile machine makes short work of parking lot, driveway, and asphalt repair.

Featuring a low-voltage, 48V system with long-lasting 25 kWh Li-Ion batteries, the system requires no special safety precautions for maintenance, and the batteries offer plenty of capacity for a typical day’s work before recharging. 

The new tandem roller’s efficient e-PERFORMANCE system is equipped with two electric motors – one dedicated to travel and the other for steering and vibration. A 26.8-hp (19.7 kW) electric motor propels the front and rear driven drums at working speeds of 0-3.1 mph (5.0) and travel speeds reaching 6.2 mph (10 kmph). 

With no warm-up necessary, the roller is quickly ready for work at the push of the ignition button. A digital 5-in (127-mm) color display gives operators a quick glance of critical operating parameters, including speed, energy output, asphalt temperature, compaction progress, operating hours, battery charging capacity, duration and power.  

The electric BW 120 AD e-5 flexibly allows for individual vibration control to both drums, and vibration actuation is conveniently controlled through the soft-response travel lever. Tailoring compaction output to the job, the roller offers two vibration frequencies of 3,360 and 3,900 vpm (54 and 64 Hz) with a single amplitude of 0.20 in (0.50 mm), generating 5,395 and 7,194 lbs. (24 and 32 kN) centrifugal force. Its intelligent vibration control (IVC) helps operators to know when compaction has been optimized to save on passes. Featuring a pressurized water spray system with 54.2-gal (205-l) tank, the scraper bars are wind-protected to ensure uniform drum coverage in adverse weather conditions. 

BVP 18/45 electric plate

2023 07 Bp1845e 018

The BP 18/45 e is the first battery-powered vibratory forward plate from BOMAG. This powerful machine is able to cope with any jobsite. Its compact size and low mass make it easy to maneuver and achieves a working speed of 25 m/min. The straight-edged base plate, made of high-quality wear-resistant material, enables extremely precise compaction along curbs or walls. 

From light earthworks to asphalt construction or paving work, the BP 18/45 e was developed as a high-performance machine with one clear objective: to be as efficient and environmentally friendly as possible. It produces no direct CO2 emissions and no harmful exhaust fumes, so it can be used safely wherever strict pollution limits have to be met, such as for work in tunnels, inside buildings or in trenches. 

The plate can be operated with the eP 20 (20 Ah) power pack – already used in the BT 60 e tamper. Swapping power packs is both quick and easy with the release lever. 

The BP 18/45 e has low operating and energy costs. Electric drives are renowned for being virtually maintenance-free; neither engine oil nor fuel filter need to be changed. 

The folding guide bar is mounted on large rubber silent blocks which reduce harmful hand-arm vibrations to a minimum enabling safe and fatigue-free guidance of BOMAG’s innovative vibratory plates with uncompromising e-Performance. Low hand-arm vibrations make the BP 18/45 e safe and productive.