Worksite Equipment: Page 32

Worksite Equipment
Hannay Reels Launches MS-1000 Spray Series Reel
Hannay Reels
This reel is for pressure washing, washdown and general spray operations.
This reel is for pressure washing, washdown and general spray operations.
Sponsored Content
Keep Your Rental Clocks—and Tires—Rolling with TyrFil™ Flatproofing
Carlisle Tyrfil
keeps rolling. No air. No flats. No downtime.
Keep Your Rental Clocks—and Tires—Rolling with TyrFil™ Flatproofing
Worksite Equipment
Western Global AutoDEF Autonomous Fluid Management in the Field
Western Global
The AutoDEF senses when the tank is in a dry state and starts pumping diesel exhaust fluid (DEF) as and when needed, eliminating the need for someone to be onsite at all times.
The AutoDEF senses when the tank is in a dry state and starts pumping diesel exhaust fluid (DEF) as and when needed, eliminating the need for someone to be onsite at all times.
Snow Removal Equipment
Hilltip Launches SprayStriker HFE De-icing Sprayers
HillTip
Powered by electric-driven high-flow pumps, the HFE series comes standard with Hilltip’s HTrack tracking software.
Powered by electric-driven high-flow pumps, the HFE series comes standard with Hilltip’s HTrack tracking software.
Worksite Equipment
Western Global Top Tote DEF Storage Solution
Western Global
This DEF storage solution has a capacity of 110 gallons and can attach to three models of TransCube Global fuel tanks — the 20TCG, 40TCG or 50TCG.
This DEF storage solution has a capacity of 100 gallons and can attach to the following models TransCube Global fuel tanks — the 20TCG, 30TCG, 40TCG and 50TCG.
Concrete Equipment & Products
Dust Off Your Jobsites
Concrete dust from sawing and drilling can present a hazard — but only if you let it.
Wet cutting can help to control concrete dust emissions when working in confined areas or inside structures.
Underground Equipment
General Equipment EPIC Series Two-man Hole Diggers
General Equipment Company
The Power-FLEX composite operator handles are exclusive to the EPIC Series, providing control and balance during operation, while dampening vibrations.
The Power-FLEX composite operator handles are exclusive to the EPIC Series, providing control, strength and balance during operation, while dampening vibrations.
Worksite Equipment
Western Global Offers DEF CUBE Storage Tank
Western Global
With a capacity of 132 gallons, the DEF Cube can help operations meet DEF requirements for Tier 4 Final engines on the jobsite.
With a capacity of 132 gallons, the DEF Cube can help operations meet DEF requirements for Tier 4 Final engines on the jobsite.
Worksite Equipment
General Equipment FCS10GEN2 Floor Covering Stripper
General Equipment Company
The FCS10GEN2 is compatible with various 10-in. wide straight and scoring type blades for use on wood and concrete surfaces.
The FCS10GEN2 is compatible with various 10-in. wide straight and scoring type blades for use on wood and concrete surfaces.
Saws - Other
Husqvarna Launches 525iDEPS MADSAW Dielectric Pole Saw
Husqvarna Construction Products
The quiet and powerful brushless motor of the battery-powered 525iDEPS coupled with a Husqvarna X-Cut chain on a 12-in. bar enables high, double-sided cutting capacity, balanced operation and performance.
The quiet and powerful brushless motor of the battery-powered 525iDEPS coupled with a Husqvarna X-Cut chain on a 12-in. bar enables high, double-sided cutting capacity, balanced operation and performance.
Worksite Equipment
RIDGID SeeSnake Mini Pro Inspection Camera with TruSense Technology
RIDGID, a subsidiary of Emerson
The compact camera is designed to inspect up to 200-ft. of 1.5- to 8-in. pipe with its mid-flex push cable that can navigate hard 90-degree bends.
The compact camera is designed to inspect up to 200-ft. of 1.5- to 8-in. pipe with its mid-flex push cable that can navigate hard 90-degree bends.
Misc. Hand Tools
Makita Unveils 40V XGT Cordless 18-inch Chainsaw
Makita USA, Inc.
The GCU04Z has an 18-in. guide bar and Makita-built motor with a variable-speed trigger that delivers 0-5,020 fpm for powerful cutting speed.
The GCU04Z has an 18-in. guide bar and Makita-built motor with a variable-speed trigger that delivers 0-5,020 fpm for powerful cutting speed.
Worksite Equipment
Magid Unveils TRX883 Glove with Level 3 Impact Protection
Magid Glove & Safety Manufacturing Company LLC
Equipped with level 3 impact protection, the glove features a new TPR design and delivers a combination of protection, comfort and grip.
Equipped with level 3 impact protection, the glove features a new TPR design and delivers a combination of protection, comfort and grip.
Previous Page
Page 32 of 285
Next Page