Everpads Cutting Teeth

November 23, 2009

Everpadssabercuttingteeth 10082706

The Everpads Cutting Teeth are designed for maximum performance on high-production cold milling planers.

High-quality carbide tip and fortified welding with hardened body
Wavy-edged, wear-resistant washer facilitates rotating and extends tool-holder life
Everpads premium Bolt-on Track pads also available

Fill out the form below to request more information about Everpads Cutting Teeth

BOMAG BM 2500/75 Milling Machine

The high-production BM 2500/75 cold planer from BOMAH is the largest milling machine in the manufacturer’s line.

190328 Bm 15 2 1

BOMAG BM 500/15-2 & BM 600/15-2 Compact Milling Machines

Available in 3- and 4-wheel designs, the BOMAG BM 500/15-2 and BM 600/15-2 compact mills feature a reengineered vibration-isolated operator’s station that improves operator efficiency and productivity.

[VIDEO] Roadtec RX-405 Milling Machine with All New Variable Cutter System

The RX-405 has a center-mounted cutter drum with an all new variable cutter system (VCS) for easy change-out of the cutter drum

[VIDEO] Roadtec Milling Machines Can Recycle Mix In-Place with CIR Package

Both the RX-700e/ex and RX-900e/ex milling machines can be equipped with bolt-on packages that allow them to be used for Cold-In-Place Recycling (CIR).

[VIDEO] Roadtec Rx505e Milling Machine Helps Keep Workers Safe

Rear object detection on the RX-505e Cold Planer is designed to stop the mill if a person or object is detected behind the machine while it is in reverse.

Rx405 jpg

Roadtec RX-405 Cold Planer

The RX-405 is designed to cut variable widths of 2 to 5 feet, and cuts up to 13” deep. It is perfectly balanced for smooth elevation changes while cutting.

81734941 4014354531924101 3264666768391536640 O

Report: OSHA Intends to Target Roadway Construction Activities for Silica Exposure

According to OSHA's National Emphasis Program, OSHA intends to target roadway construction activities, specifically milling activities, to identify and reduce worker exposure to silica dust.

The BOMAG/Fayat 17,200 ft2 Central Hall exhibit #C30316 will feature more than 10 new products, including path and highway pavers, half-lane mills, single drum and tandem vibratory rollers with alternative drive systems and vibratory plate compactors.

BOMAG Announces CONEXPO 2020 Exhibit Plans

The company will unveil 10 new pieces of equipment with a focus on innovations surrounding the environment, safety and technology

Wirtgen W 220 Fi and W 250 Fi Large Milling Machines Premiere at CONEXPO 2020

190328 Bm 15 2 1

BOMAG BM 500/15-2 & BM 600/15-2 Compact Cold Planers

BOMAG 2200/60 Cold Planer

BOMAG reintroduces its field-proven 600-hp-class BOMAG 2200/60 cold planer with a Tier 4 Final engine and multiple productivity enhancing design advancements

https://s3.amazonaws.com/creative.acbusinessmedia.com/ACON/managing-your-rap/index.html

Managing Your RAP from Start to Finish

With the increase in the amount of recycled asphalt pavement (RAP) used in modern mix designs, good RAP management practices need to be deployed across the entire production and paving process

HP Asphalt Cold Patch — designed to withstand the most extreme conditions.

HP Asphalt Cold Patch — designed to withstand the most extreme conditions.

Teaser: Select aggregates and anti-strip binding agents make HP Asphalt Cold Patch an unrivaled choice for asphalt and concrete pavement repairs.

Img 7252 583499731bcc1

[INFOGRAPHIC] What Size Milling Machine Do You Need?

Whether you’re a dedicated milling contractor or a paving contractor looking to bring this service in-house, there are many things to consider before making a purchase. This infographic can help.

Caterpillar Pm822 Cold Planer 5d85070ef2126

Caterpillar Makes Engine, Other Updates to Cold Planers

Engine updates to the Caterpillar half-lane cold planers increase power and lower maintenance costs.

In this area, the Wirtgen milling machine was operating with a high milling drum speed and a high advance rate.

Wirtgen W 200 Cuts Milling Time in Half on Resurfacing Project in the Alps

A 1.5-in.-thick surface course needed to be renewed across the entire width along a 6-mile section of road in Italy

Renken brings 20 plus years of construction equipment sales, business development and sales management experience to this position.

BOMAG Appoints Cole Renken Vice-President of Sales & Marketing

Renken will be responsible for developing and executing short and long-term growth strategies to better optimize the sales and customer support for our dealer and rental channel partners.

WITOS FleetView gets the machines of WIRTGEN, VÖGELE and HAMM communicating: every unforeseen fault, along with every upcoming service interval, is displayed in the WITOS FleetView web application.

WITOS FleetView Helps Improve Fleet Management

This telematics solution records operating, position and maintenance data from Vögele, Wirtgen and Hamm machines, increasing fleet availability as a result.

Capture

[VIDEO] Caterpillar Product Expert Discusses K Series Milling Rotor

A.J. Lee with Caterpillar Inc. discusses the new K System for mills.

Cm20181017 51966 04184

Caterpillar K System Milling Drum

Maxresdefault 5c656192c6aee

[VIDEO] Roadtec Updates RX-700e Cold Planer with More Power & Reporting Capabilities

The upgraded RX-700e cold planer features the increased power of an 800-hp Caterpillar engine. The new Tier 4 Final engine does not require DEF fluid as a component of the after-treatment system, reducing the operation costs typically required at this emi

Depending on the application, PCD cutters from Wirtgen provide a significantly longer service life, enhanced machine productivity, increased machine availability, constant milling pattern and improved working conditions due to minimized maintenance efforts.

Wirtgen PCD Cutting Tools Help Improve Milling Results

Polycrystalline Diamond (PCD) cutting bits achieve a more consistent milling pattern over a longer period of time compared to conventional milling teeth

W Photo W150 C Fi 00659 Hi

Wirtgen W 150 CFi Compact Milling Machine

New 1,800 mm milling drum option extends 46,000-lb. mill's capacity to take on surface-course rehabilitation for medium to large job sites

Site Manager Cleiton Farias de Jesus also appreciates the eco-friendly technologies of the W 200. They play a key role in ensuring that his company meets the ISO 14001 Environmental management standard.

Wirtgen W 200 Milling Machine Rehabilitates Brazil's Congested Road Network

Wirtgen W 200 large milling machine ran in continuous operation 24 hours a day during the rehabilitation work of two main Brazil traffic arteries