Offering a 47.2-in. cutting width and 13-in. maximum cutting depth, the BOMAG BM1200/35 cold milling machine features a rear rotor design.
- Constructed with the unique BMS 15 interchangeable holder system, cutter design incorporates a single bolt for holder retention and requires a low tightening torque of 75 ft/lb.
- Features Ion Dust Shield technology for effective removal of fine dust and particulate matter generated by the milling process
- Vibration-isolated operator’s platform with swivel seat design
- Ergonomically designed dashboard with intuitive switches, levers and clear readout displays
- Three milling drum speeds – 85, 95 and 107 rpm – to match cutting speed to jobsite condition
- 25-6.in.-wide inside and 23.6-in.-wide outside conveyors with capacities reaching 6,357 ft3/hr
- Outside conveyor swivels 45° to the left and right; maximum discharge height is 224.4 in.
- 349-hp Tier 4 Final MTU diesel engine
- Milling speeds reach 105 fpm
- Pressurize water injection system offers a variable flow rate of 0-1.6 gpm to the cutter housing
Fill out the form below to request more information about BOMAG BM1200/35 Cold Mill
