[VIDEO] Bomag’s RS500 Side-Shifting Reclaimer/Stabilizer is Powerful, Flexible and Safe

Power from a 500-hp MTU engine through a hydrostatic rotor drive; side-shifting rotor left or right to 12 in. beyond the tires, and elevating cab for low transport height but great jobsite view

March 7, 2017

Power from a 500-hp MTU engine through a hydrostatic rotor drive; side-shifting rotor left or right to 12 in. beyond the tires, and elevating cab for low transport height but great jobsite view

Recommended
Levelset Payment Speed
The Key to Faster Construction Payment: Better Communication
Most recent Levelset survey of contractors suggests the three biggest factors helping contractors get paid faster boil down to communication: expectations, status and timelines
October 27, 2020
Cu Group Pacman 074 5f8ded56cf8e9
10 Hottest Construction Stories This Week: Cummins EPA 2021 X12 and X15 Engines Use Less Fuel
Most-read construction stories include Caterpillar and PAC-MAN rolling out a new game, a test of orange pavement markings in work zones, new Cat S42 rugged smartphone withstands submerged scrubbing and more
October 21, 2020
Achieve the Longest Pavement Service Life – Rout, Clean & Seal with Crafco!
Sponsored
Achieve the Longest Pavement Service Life – Rout, Clean & Seal with Crafco!
Crafco’s rout/seal configuration & quality sealants can extend sealant service life to more than 7 years in AC & 21 years in PCC pavements.
October 1, 2020
Latest
Img 0342
BOMAG BM 2500/75 Milling Machine
The high-production BM 2500/75 cold planer from BOMAH is the largest milling machine in the manufacturer’s line.
March 13, 2020
190328 Bm 15 2 1
BOMAG BM 500/15-2 & BM 600/15-2 Compact Milling Machines
Available in 3- and 4-wheel designs, the BOMAG BM 500/15-2 and BM 600/15-2 compact mills feature a reengineered vibration-isolated operator’s station that improves operator efficiency and productivity.
March 13, 2020
Img 0302
[VIDEO] Roadtec RX-405 Milling Machine with All New Variable Cutter System
The RX-405 has a center-mounted cutter drum with an all new variable cutter system (VCS) for easy change-out of the cutter drum
March 12, 2020
Img 0225
[VIDEO] Roadtec Milling Machines Can Recycle Mix In-Place with CIR Package
Both the RX-700e/ex and RX-900e/ex milling machines can be equipped with bolt-on packages that allow them to be used for Cold-In-Place Recycling (CIR).
March 11, 2020
Img 0218
[VIDEO] Roadtec Rx505e Milling Machine Helps Keep Workers Safe
Rear object detection on the RX-505e Cold Planer is designed to stop the mill if a person or object is detected behind the machine while it is in reverse.
March 11, 2020
Rx405 jpg
Roadtec RX-405 Cold Planer
The RX-405 is designed to cut variable widths of 2 to 5 feet, and cuts up to 13” deep. It is perfectly balanced for smooth elevation changes while cutting.
March 10, 2020
81734941 4014354531924101 3264666768391536640 O
Report: OSHA Intends to Target Roadway Construction Activities for Silica Exposure
According to OSHA's National Emphasis Program, OSHA intends to target roadway construction activities, specifically milling activities, to identify and reduce worker exposure to silica dust.
February 17, 2020
The BOMAG/Fayat 17,200 ft2 Central Hall exhibit #C30316 will feature more than 10 new products, including path and highway pavers, half-lane mills, single drum and tandem vibratory rollers with alternative drive systems and vibratory plate compactors.
BOMAG Announces CONEXPO 2020 Exhibit Plans
The company will unveil 10 new pieces of equipment with a focus on innovations surrounding the environment, safety and technology
January 23, 2020
Img 0092
Wirtgen W 220 Fi and W 250 Fi Large Milling Machines Premiere at CONEXPO 2020
January 7, 2020
190328 Bm 15 2 1
BOMAG BM 500/15-2 & BM 600/15-2 Compact Cold Planers
October 29, 2019
Img 4548
BOMAG 2200/60 Cold Planer
BOMAG reintroduces its field-proven 600-hp-class BOMAG 2200/60 cold planer with a Tier 4 Final engine and multiple productivity enhancing design advancements
October 29, 2019
https://s3.amazonaws.com/creative.acbusinessmedia.com/ACON/managing-your-rap/index.html
Managing Your RAP from Start to Finish
With the increase in the amount of recycled asphalt pavement (RAP) used in modern mix designs, good RAP management practices need to be deployed across the entire production and paving process
October 7, 2019
A Wirtgen W 150 CF compact milling machine was taksed with milling 15 miles of one of Mexico's most important economic and industrial centers.
Wirtgen Milling Machine Tackles Entire Mexican Road Pavement in One Pass
A Wirtgen W 150 CF compact milling machine with an extended drum assembly was the unit of choice to mill 15 miles of road for Mexico's new Bus Rapid Transit system
October 28, 2019
Img 7252 583499731bcc1
[INFOGRAPHIC] What Size Milling Machine Do You Need?
Whether you’re a dedicated milling contractor or a paving contractor looking to bring this service in-house, there are many things to consider before making a purchase. This infographic can help.
September 27, 2019
Caterpillar Pm822 Cold Planer 5d85070ef2126
Caterpillar Makes Engine, Other Updates to Cold Planers
Engine updates to the Caterpillar half-lane cold planers increase power and lower maintenance costs.
September 23, 2019
In this area, the Wirtgen milling machine was operating with a high milling drum speed and a high advance rate.
Wirtgen W 200 Cuts Milling Time in Half on Resurfacing Project in the Alps
A 1.5-in.-thick surface course needed to be renewed across the entire width along a 6-mile section of road in Italy
September 23, 2019
Renken brings 20 plus years of construction equipment sales, business development and sales management experience to this position.
BOMAG Appoints Cole Renken Vice-President of Sales & Marketing
Renken will be responsible for developing and executing short and long-term growth strategies to better optimize the sales and customer support for our dealer and rental channel partners.
June 25, 2019
WITOS FleetView gets the machines of WIRTGEN, VÖGELE and HAMM communicating: every unforeseen fault, along with every upcoming service interval, is displayed in the WITOS FleetView web application.
WITOS FleetView Helps Improve Fleet Management
This telematics solution records operating, position and maintenance data from Vögele, Wirtgen and Hamm machines, increasing fleet availability as a result.
March 26, 2019
Capture
[VIDEO] Caterpillar Product Expert Discusses K Series Milling Rotor
A.J. Lee with Caterpillar Inc. discusses the new K System for mills.
February 18, 2019
Cm20181017 51966 04184
Caterpillar K System Milling Drum
February 18, 2019
Maxresdefault 5c656192c6aee
[VIDEO] Roadtec Updates RX-700e Cold Planer with More Power & Reporting Capabilities
The upgraded RX-700e cold planer features the increased power of an 800-hp Caterpillar engine. The new Tier 4 Final engine does not require DEF fluid as a component of the after-treatment system, reducing the operation costs typically required at this emi
February 14, 2019
Depending on the application, PCD cutters from Wirtgen provide a significantly longer service life, enhanced machine productivity, increased machine availability, constant milling pattern and improved working conditions due to minimized maintenance efforts.
Wirtgen PCD Cutting Tools Help Improve Milling Results
Polycrystalline Diamond (PCD) cutting bits achieve a more consistent milling pattern over a longer period of time compared to conventional milling teeth
February 4, 2019
W Photo W150 C Fi 00659 Hi
Wirtgen W 150 CFi Compact Milling Machine
New 1,800 mm milling drum option extends 46,000-lb. mill's capacity to take on surface-course rehabilitation for medium to large job sites
January 8, 2019
Site Manager Cleiton Farias de Jesus also appreciates the eco-friendly technologies of the W 200. They play a key role in ensuring that his company meets the ISO 14001 Environmental management standard.
Wirtgen W 200 Milling Machine Rehabilitates Brazil's Congested Road Network
Wirtgen W 200 large milling machine ran in continuous operation 24 hours a day during the rehabilitation work of two main Brazil traffic arteries
October 22, 2018