Here's a look at the latest opportunities provided by suppliers to the asphalt industry for the 2017-2018 season.
Astec Inc.
Contact: Margaret Parker
Phone: 423-827-1899
Email: [email protected]
Website: astecinc.com/schools
COURSE:
Advanced Customer Schools
ASTEC Advanced Customer Schools teach hands-on maintenance and advanced troubleshooting techniques. Instructors include ASTEC and Heatec Engineers and Service Technicians with decades of field experience.
During the four full days of instruction, students will have the opportunity to meet with instructors, ASTEC service professionals, engineers and fellow students to exchange information. Through a unique combination of lectures and hands-on simulators, the ASTEC Advanced Customer Schools strive to cover more than any other asphalt industry training school.
Six sessions available:
Week 1: January 8 – 11
Week 2: January 15 – 18
Week 3: January 22 – 25
Week 4: February 5 – 8
Week 5: February 12 – 15
Week 6: February 19 - 22
Contact: Parker Campbell Weaver, Training Manager
Phone: 803-337-0700
Email: [email protected]
Website: bomag.com/us
BOMAG Americas offers a variety of courses based from its South Carolina FAYAT Academy training center. In-depth training sessions enable BOMAG customers to get the most from their paving, material transferring, compaction, milling and re-claimation/stabilization equipment. Distributor training classes help our local representatives to better support BOMAG equipment end-users. Year-round classes are conducted at either the Ridgeway, SC, training facility or on-site at custom-er/distributor facilities. Each interactive course is led by BOMAG specialists, one of the road building and compaction indus-try’s most experienced team, offering more than 150 years combined practical field experience.
COURSE: Quality Paving Principles
From proper paver and screed set-up to best practices for improving mat quality, BOMAG specialists provide thorough instruc-tion on paving basics, proper applications and machine controls for laying smooth mats. Instructors review routine mainte-nance needs and common troubleshooting techniques to extend machine longevity and offer tips to help operators identify and remedy typical paving challenges, including how to control segregation.
Instructors: BOMAG Road Building Specialists
COURSE: Advanced Paving Techniques to Combat Segregation
Designed for mainline pavers and contractors often working with mixes prone to segregation, this course covers the origins of material and thermal segregation and how to virtually eliminate segregation using advanced paving techniques with BOMAG Cedarapids Remix Anti-Segregation system pavers and the RoadMix material transfer vehicle.
Instructors: BOMAG Road Building Specialists
COURSE: Asphalt Compaction – Principles & Technology
BOMAG instructors teach the fundamentals and best practices for achieving spec density when compacting both hot mix and warm mix asphalt. Asphalt temperature ranges, rolling patterns and density results for each rolling zone – breakdown, inter-mediate and finish – are reviewed in-depth. Specialists thoroughly cover the use of innovative compaction systems like Econo-mizer and TanGO for reaching spec smoothness and compaction requirements as well as achieving bonus-level results.
Instructors: BOMAG Compaction Specialists
COURSE: Soil Compaction – Principles & Technology
This course details the different soil types and the importance of matching the right compactor to the soil. Instructors cover the need for proper moisture content and the four forces of compaction. Participants receive an overview of the various types of innovative compaction technology, including the BOMAG Terrameter that delivers material stiffness values to detect and cor-rect soft spots in the soil.
Instructors: BOMAG Compaction Specialists
COURSE: Quality Restorations Practices – Milling
Our milling restoration course focuses on machine application, operating safety, grade control and maintenance of BOMAG milling equipment. Instructors cover best application practices to achieve efficient production and various drum options to increase productivity. Basic maintenance of wear items is covered to increase machine uptime availability.
Instructors: BOMAG Application Specialists
COURSE: Quality Restoration Practices: Recycling & Stabilization
Contractors learn operating, safety and best application practice techniques for both the CMI RS and BOMAG MPH Series of reclaimer/stabilizers. Instructors cover the various available drum and drive options for selecting the best machine configura-tion to efficiently complete the application. Machine options that increase versatility in the field – automatic cross slope, water and water/emulsion systems – are also thoroughly reviewed as are basic maintenance and service tips to increase machine uptime availability.
Instructors: BOMAG Application Specialists
COURSE: BOMAG Telematics and Fundamentals of Machine Operation, Service & Repair
Telematics can improve machine uptime by catching minor problems before they cause downtime. Instructors cover BOMAG Telematic system operation and capabilities for the entire BOMAG/Cedarapids/CMI product range. Additionally, attendees are taught the principles of machine operation, maintenance, component identification, troubleshooting, and hydraulic and electri-cal systems analysis.
Instructors: BOMAG Service and Product Support Specialists
Fee: There are no fees associated with BOMAG equipment training courses, dates and locations of schools are flexible. Reservations for dates, times and locations required. Contact BOMAG for further information and to schedule a class.
Contact: Vinnie Hebert
Phone: 800-628-8139 or 508-946-6200
Email: [email protected]
Website: www.brookfieldengineering.com/services/educational-programs
Brookfield offers its Practical Course on Viscosity Measurements. This popular course was created to help AMETEK Brookfield Viscometer users comprehend the functionality of their instrument, solve the mysteries of fluid behavior and Rheology, and create successful and repeatable viscosity test methods for use in both R&D and QA/QC environments. Consistent measurement is vital in the success of any product and understanding viscosity is a key part to maintaining quality control.
The course is offered at AMETEK Brookfield in Middleboro, MA and at major cities across the United States. Space is limited and customers are encouraged to sign up early.
COURSE: Practical Course on Viscosity Measurements
The one-day Practical Course on Viscosity Measurements will help you get the most out of your AMETEK Brookfield Viscometer and Rheometer measurements by providing you with information, activities and techniques that you can easily understand and immediately put to practical use. Discussion topics include how to pick a spindle/speed combination, methodology, rheology, calibration and verification checks.
* Designed for beginner to intermediate users.
COURSE: Lab Day/Advanced Viscosity Test Methods
This one-day, advanced course goes beyond pass/fail criteria. Using real world sample testing, the class examines how to apply viscometric data as a problem solving/product performance/processing tool. Discussion topics include how Brookfield Rotational Viscometers and Rheometers can be used to provide meaningful analysis of your products. This course is offered only by request for companies who have a training requirement for seven or more participants.
* Designed for the intermediate to advanced users.
Caterpillar Inc.
Contact: Ron Wilson or Nathan Just
Phone: 763-315-5516 or 763-315-5540
Email: [email protected]
Website: www.cat.com/paving/training-solutions
Caterpillar announces that the following customer training courses have been added to the Customer Course Catalog. The calendar, course descriptions, and registration forms can be found on Cat.com. (Cat.com > Products > New > Equipment > Asphalt Pavers > Training Makes a Difference > Paving > Click on “Learn More” under Paving Training Schedule) [Direct Link: www.cat.com/paving/training-solutions]
COURSE: PM600 and PM800 Series Cold Planer Service Training
This 4-day course provides theory and hands-on training. Upon completion of the course, students will be able to trace the flow of oil through hydraulic systems, test and adjust hydraulic pressures, troubleshoot hydraulic and electrical systems, explain ECM functions and calibration steps, and set up automatic grade and slop control
January 9-12, 2018 (Minneapolis, MN) FULL
COURSE: F Series Asphalt Paver Service Training, Level II
This 4-day course provides theory and hands-on training for customer technicians. Upon completion, students will be able to trace the flow of oil through hydraulic systems, test and adjust hydraulic pressures, troubleshoot hydraulic and electrical systems, and explain ECM functions and calibration steps for the AP1000F, AP1055F, AP600F, AP655F, AP500F and AP555F asphalt pavers.
January 23-26, 2018 (Minneapolis, MN)
January 30-February 2, 2018 (Minneapolis, MN)
COURSE: Paving Operations Training
This course is designed for paving supervisors and paving crew members with one or more years of experience with the lay down of hot mix asphalt. Training is taught using Cat “F” Series Pavers with Caterpillar Grade and Slope systems. The daily curriculum includes classroom and hands-on training.
Classroom Interactive Sessions:
Fundamentals of paving
Paving By the Numbers
Understanding grade and slope controls
Screed Adjustments
Understanding mat defects
Compaction basics
Hands–on Training
Transverse and longitudinal joint construction
Feeder system set-up and adjustments
Variable width paving
Grade/slope set-up and troubleshooting
ECM calibration
Critical screed adjust
Fee: $3100
Attendance Limit: Limited to customer attendees. Dealer representatives are welcome to attend as host to their customer group.
Dates include:
February 5-9, 2018 (Tucson, AZ) - FULL
February 12-16, 2018 (Tucson, AZ) - FULL
February 26-March 2, 2018 (Tucson, AZ) - FULL
March 5-9, 2018 (Tucson, AZ)
March 12-16, 2018 (Tucson, AZ) - FULL
March 19-23, 2018 (Tucson, AZ)
Contact: Carrie Hudak
Phone: 952-939-6000
Email: [email protected]
Website: clarencerichard.com
COURSE: Classroom Training
Plant Manager, Operator, Maintenance, Mix Quality, Safety Workshop
Dates: February 19-20, 8:00 am to 5:00 pm, Denver, CO.
Curriculum as used in Web Based Training.
Access to Plant Workshop Web-Based Training
Fee: $995 includes Meals/Social Hours.
COURSE: Web-Based Training
Clarence Richard offers Web-Based Workshops that are interactive and engaging. Workshops consist of many hours of self-based/self-paced training.
On-Line allows participants to train at their own time and pace and eliminates the need to travel to a training facility and set aside a block of time for training .
On-Line participants may review as often as they want throughout the year. Participants may train on a slow day or rain day, at their plant, shop or home. Questions can be easily answered by e-mail directly from the self-based training program or calling. When questions requiring complex answers, a personal webinar can be scheduled to answer those questions. Included with the class are particpant’s assessment of improvement and achievement and transcripts.
COURSE: Plant Operation Workshop Self-Based Training
Module 1 and 2: Safety.
Developing Confined Space-Lockout Written Procedure Handling Asphalt Oil, Proving Safety Interlocks, Electrically Safe Maintenance, Damage Control.
Module 3: Drum/Trunnion Maintenance
Module 4: Batch Plant Operation
Module 5: Feeder
Module 6: Silo Operation
Module 7: Scales and Meters
Module 8: Control System Operation
Module 9: Burner Operation Module
Module 10: Hot Oil Heating
Module 11: Aggregate Drying
Module 12: Plant Production Troubleshooting
Module 13: Baghouse & Primary Collector Operation
Module 14: Plant Performance Evaluation
Fee: $995
Designed for plant managers - operators, oilers, plant mechanics-technicians and trainees. 3.5 CEU, 35 hours, Modules 1-14.
COURSE: Quality Control Workshop Self-Based Training
QC Managers understand how plant management, operation and maintenance affect the quality of mix the plant produces and what to do about it.
Fee: $595
Designed for QC managers/technicians/trainees. 2 CEU, 20 hours, Modules 4-8.
COURSE: Safety Directors Workshop Self-Based Training
This course covers OSHA-required confined space-lockout written procedure development specifically for asphalt plants, OSHA-required arc flash and electrocution protection, handling asphalt oil, proving safety interlocks, electrically safe maintenance, damage control.
Fee: $295
Designed for safety directors/trainees with an accent on what a plant control engineer knows that typical safety directors may not know.
1 CEU, 10 hours, Modules 1-2, Electro-Mod 3.
COURSE: Electro-Mechanical Systems Maintenance & Troubleshooting Workshop Self-Based Training
This course covers basic electricity, circuit analysis, safe meter usage, and various levels of troubleshooting. A novice will learn an extreme amount of skills and knowledge, while a veteran will walk way with many new techniques to help find the problems quickly. Past participants claim they have not experienced learning electricity to be as simple as the Workshop explains it.
Fee: $595
Designed for plant managers — operators, oilers, plant mechanics-technicians and trainees. Previous electrical training is not required. 1.6 CEU.
Phone: 407-290-6000, ext. 342
Website: gencor.com/training
COURSE: Gencor Advanced Training 2018
Week 1: Jan. 29-Feb 2, 2018
Week 2: Feb. 5-9, 2018
Week 3: Feb. 12-16, 2018
Week 4: Feb. 19-23, 2018
Achieve your production goals by making sure your team attends the Gencor Advanced Training School 2018.
Our expert instructors provide step-by-step, hands-on training on real plant equipment. Benefit from the most comprehensive training program in the industry.
Limited seats available. Registration closes Friday, December 8, 2017.
Hauck Mfg. Co.
Contact: Pat Horn
Phone: 1-717-389-0455
Email: [email protected]
Website: ThermalSolutions.honeywell.com
COURSE: Service Schools
In response to Hauck's integration with Honeywell, the location of the training has changed to the Maxon facility in Muncie, IN. Training and Lodging locations will be provided on the school flyers and registration forms.
Seminar #1
Three day session with a welcome reception the evening of January 15.
January 16 – 18, 2018
Fee: $950
Seminar #2
Three day session with a welcome reception the evening of January 22.
January 23 – 25, 2018
Fee: $950
Seminar #3
Three day session with a welcome reception the evening of January 29.
January 30 – February 1, 2018.
Fee: $950
HCSS
Contact: Lauren Hill, HCSS Events Coordinator
Phone: 1-713-270-4000
E-mail: [email protected]
Website: ugm.hcss.com
COURSE: 2018 HCSS Users Group Meetings
For over 25 years, HCSS customers have been gathering annually to learn the latest software features, network with peers, get help from the experts and provide feedback for future releases.
The HCSS Users Group Meetings are for users of any of the HCSS suite of software including estimating, job management, dispatching, fleet management, telematics, safety, or cloud software. The informative class sessions cover…
• HCSS HeavyBid
• HCSS HeavyJob
• HCSS Dispatcher
• HCSS Equipment360
• HCSS Telematics
• HCSS Safety
• HCSS FuelerPlus
• HCSS eLogs
• HCSS Fleet Management
• HCSS Cloud
• HCSS Skills (skills & certification tracking)
• HCSS Forms
• HCSS OEM Link
HCSS offers over 100 classes during 13 sessions throughout the three days of meetings.
Dates:
January 29-Feb 1, 2018
February 19-22, 2018
Fee: $1,725 per person
Fee discounts:
• Register by October 31, 2017: $200 ($1,525/person)
• Register by November 30, 2017: $100 ($1,625/person)
• Multi-registrant (3-9 from same company): subtract additional $50/person
• Multi-registrant (10+ from same company): subtract additional $100/ person
Heatec
Phone: 423-867-4210
Website: http://www.heatec.com/customer-schools/terminal-technical-school.html
COURSE: Terminal Technical School
Date: January 17, 2018
Location: Heatec Training Facility in Chattanooga, TN
Heatec is offering a 1-day educational course January 17th on asphalt terminal heating systems. This course brings you together with experienced instructors to explore the best practices and techniques for safely operating heating systems at your terminal. Heatec uses a combination of lectures and hands-on simulators to enhance the learning process. The course will cover maintenance and troubleshooting for thermal fluid heaters, importance of proper flow, combustion safety, and configuration, operation and troubleshooting the flame monitoring system.
Contact: Michelle Painter
Phone: 800-272-7100
Website: Roadtec.com/training
Roadtec, Inc offers the Paving Professionals Workshop and the Technical Service Schools in Chattanooga, TN. Students will learn in the categories of:
Paving: Laydown
Mechanics: Equipment Repair
Supervisory: Training-the-Trainer
COURSE: Technical Service Schools
Paver 1 – Jan. 10-12
Paver 2 – Jan. 15-17
Mill 1 – Feb. 7-9
Mill 2 – Feb. 12-14
Roadtec Shuttle Buggy 1 – Feb. 20-21
Roadtec Shuttle Buggy 2 – Feb. 22-23
Stabilizer – Feb. 26-27
COURSE: Paving Professionals Workshop
PPW Session 1 – January 22-23
PPW Session 2 – January 24-25
PPW Session 3 – January 29-30
PPW Session 4 – January 31-Feburary 1
$250 – Paving Professionals Workshop
$450 – Technical Service Schools
Students can earn CE units.
Special instructors for the Paving Professionals Workshop for 2018 include: John Ball of Top Quality Paving, Brian Horner of E.D. Etnyre, Scott Hall of Oldcastle, Richard Kramer of Roadtec, Charles Butler of Roadtec,and David Bussard of Roadtec
Phone: 800-724-6306
Website: transtechsys.com
COURSE: Non-Nuclear Density Gauge Training
TransTech Systems Inc., offers free Non-Nuclear Density Gauge Training onsite in Latham, NY.
Students will learn in the categories of lab/mix design/QC/QA supervisory/training the trainer.
Dates are available upon request.
Troxler Electronic Laboratories
Phone: 1-877-TROXLER
Email: [email protected]
Website: troxlerlabs.com
ONLINE COURSES
Troxler's online courses allow to you to earn certifications and gain new skills/refresh old ones when it suits your schedule. For more information or to register for a course, click Online Training - NEW on the Training menu at www.troxlerlabs.com.
COURSE: Nuclear Gauge Safety Training plus Hazmat
Every new nuclear gauge operator must take a training course. (Our online course is accepted for certification by most states.)
Topics Covered:
• Radiation safety fundamentals and principles
• Regulatory requirements
• Portable gauge theory and operation
• Gauge maintenance
• Gauge packaging, storage, and transport
COURSE: Radiation Safety Officer Training—NEW!
This course teaches a radiation safety officer (RSO) the responsibilities of the job.
Topics Covered:
• Radiation safety fundamentals and principles
• License application and renewal
• Regulatory requirements, record-keeping, and other RSO responsibilities
• Incidents and accidents
• Inspections
COURSE: Hazmat Certification/Recertification
This course satisfies U.S. Department of Transportation (DOT) Title 49 CFR, Part 172, Subpart H training requirements for individuals shipping or transporting hazardous materials. (Hazmat recertification is required every three years.)
COURSE: Refresher Course for Nuclear Gauge Operators
If you work in a state that requires you to renew your safety training to operate nuclear gauges, this course will fulfill that requirement. (Please note, however, that it is not a hazmat recertification course.)
Topics Covered:
• Radiation safety
• New regulatory requirements
• Operating and emergency procedures
• Maintenance
• Transportation procedures
COURSE: Compaction & Density Testing
In this course, you will learn the basic principles of compaction and density testing methods (with an emphasis on nuclear testing methods).
COURSE: Model 3400 Series Gauge Operator Training—COMING THIS WINTER!
CLASSROOM COURSES
For more information or to view our course schedule, click Classroom Training on the Training menu at www.troxlerlabs.com. (If you are interested in classroom training on a date and/or at a location that is not currently on our calendar, contact us at [email protected].)
COURSE: Hands-on Non-nuclear and Nuclear Gauge Training
This course is available at our headquarters in Research Triangle Park, North Carolina, and through our regional sales representatives by request. To schedule a session, contact us at [email protected].
COURSE: Nuclear Gauge Safety Training plus Hazmat
Every new nuclear gauge operator must take a training course. (Our classroom course is accepted for certification by
all states.)
Topics Covered:
• Radiation safety fundamentals and principles
• Regulatory requirements
• Portable gauge theory and operation
• Gauge maintenance
• Gauge packaging, storage, and transport
COURSE: Radiation Safety Officer Training
This course teaches an RSO the responsibilities of the job.
Topics Covered:
• Radiation safety fundamentals and principles
• License application and renewal
• Regulatory requirements, record-keeping, and other RSO responsibilities
• Incidents and accidents
• Inspections
COURSE: Hazmat Certification/Recertification
This course satisfies DOT Title 49 CFR, Part 172, Subpart H training requirements for individuals shipping or transporting hazardous materials. (Hazmat recertification is required every three years.).
Volvo Construction Equipment/Road Institute
E-mail: [email protected]
Website: roadinstitute.com
Entering its 52nd season, the paving industry’s premier training program offers a mix of classroom and hands-on training on a variety of operations and maintenance topics benefiting newcomers and industry veterans alike.
Road Institute will offer training sessions, ranging from two to five days, beginning in late October 2017 through May 2018. Courses are held in at the Road Institute Training Center in Shippensburg and Chambersburg, PA and at the Road Institute West location in Phoenix, AZ.
This year, in addition to offering training on the use of Compact Assist for Asphalt, the Volvo intelligent compaction system with Density Direct, Road Institute will be using recently released paver and compactor models in operation and technical training, including the P7000B and P4410B pavers and the DD30B, DD35B, DD120C and DD140C compactors.
Early registration is recommended as class size is limited to allow for ideal instructor-to-attendee ratio. A 25 percent discount will be given to those who register by October 31 for any classes held October through December 2017.
COURSE: Paver and Compactor Operation & Maintenance
Two days of classroom-style learning plus two days of hands-on application in this course provides best practices for operation and management of paving equipment.
• Oct. 24 - 27, 2017, Shippensburg, PA (Topcon)
• Nov. 7 - 10, 2017, Phoenix, AZ (Blaw-Kontrol)
• Dec. 12 - 15, 2017, Phoenix, AZ (Topcon) (WMA)
• Jan. 9 - 12, 2018, Phoenix, AZ (Topcon)(WMA)
• Feb. 13 - 16, 2018, Phoenix, AZ (Topcon)(ESP.)
• Feb. 27 - Mar. 2, 2018, Phoenix, AZ (Topcon)(WMA)
• Mar. 20 - 23, 2018, Phoenix, AZ (Blaw-Kontrol) (WMA)
• Apr. 10 - 13, 2018, Phoenix, AZ (Topcon)
• Apr. 24 - 27, 2018, Shippensburg, PA (Topcon)
• May 8 - 11, 2018, Shippensburg, PA (Blaw-Kontrol)
COURSE: Paver Hydraulic and Electrical Systems - Blaw-Knox (Step 1)
Students become familiar with the hydraulic and electrical systems of pavers with lessons that allow for hands-on troubleshooting.
• Nov. 14 - 17, 2017, Chambersburg, PA
• May 22 - 25, 2018, Chambersburg, PA
COURSE: Paving and Compaction Application Seminar
The course objective is o utilize applied training techniques to teach paving and compaction best practices to those people with responsibility for or interest in operation / management of contemporary paving equipment. To use a paver and compactor to their fullest potential while achieving the highest quality work without sacrificing production or increasing costs.
• Nov. 29 - 30, 2017, Shippensburg, PA
• May 15 - 16, 2018, Shippensburg, PA
COURSE: Paver Hydraulic and Electrical Systems - P7000/P7000B (Step 1)
Students become familiar with the hydraulic and electrical systems of pavers with lessons that allow for hands-on troubleshooting.
• Oct. 3-7, 2015, Chambersburg, PA
COURSE: Paver Hydraulic & Electrical Systems – P7000 Pavers (Step 1)
• Dec. 4-8, 2017, Chambersburg, PA
• Fan. 22 - 26, 2018, Phoenix, AZ
• Feb. 5 - 9, 2018, Chambersburg, PA
• Mar. 12 - 16, 2018, Chambersburg, PA
COURSE: Paver Hydraulic & Electrical Systems – P7000 Pavers (Step 2)
• Apr. 3 - 5, 2018, Chambersburg, PA
COURSE: Small Asphalt Compactor Mechanics (Step 1 & 2)
Students learn mechanics for asphalt compactors under seven tons.
• Dec. 12 - 14, 2017, Chambersburg, PA
COURSE: Large Asphalt Compactor Mechanics (Step 1)
• Jan. 9 - 11, 2018. Chambersburg, PA
• Mar. 6 - 8, 2018, Chambersburg, PA
COURSE: Soil Compactor Mechanics (Step 1)
This course provides students with general service instruction for soil compactors.
• Feb. 13 - 15, 2018, Chambersburg, PA
COURSE: Paver Screed Operation and Adjustment
This course covers principles of paver operation, maintenance, mechanical adjustments, screed set-up and screed running adjustments to ensure paving quality.
• Jan. 16 - 18, 2018, Chambersburg, PA
COURSE: Automatic Grade and Slope Systems
This course provides lessons on how to safely set up, operate and troubleshoot common control issues that can result in poor ride-ability and joint construction.
• Feb. 20 - 22, 2018, Chambersburg, PA
Wirtgen America Inc.
Phone: 615-501-0600
Website: wirtgen-group.com/america/en-us/customer-support/training/
The 21,000-square-foot CTT Center for Training and Technology in suburban Nashville offers a new complement of classes for Wirtgen, Vögele, Hamm and Kleemann customer operator and maintenance personnel, and for dealer/distributor personnel (classes listed online only), for the 2017-2018 season.
WIRTGEN
COURSE: W 200 Series Cold Milling Machine Operation
This course covers safe work practices on and around cold milling machines. You will learn factory-recommended operational practices for the W 200 series cold milling machine. Machine operator controls and Level Pro + will be reviewed in detail preparing you for daily machine operation.
Fee: $270
COURSE: W 200 Series Technical Service
This course covers safe work practices on and around cold milling machines. You will learn factory-recommended maintenance practices for proper maintenance of W 200 series cold milling machines.
Fee: $405
W 200 Series includes: W 200, W 200i, W 210, W 210i, W 220, W 250 and W 250i.
COURSE: W 120CFi Cold Milling Operation
This course covers safe work practices on and around cold milling machines. You will learn factory-recommended operational practices for the W 120CFi cold milling machine. Machine operator controls and Level Pro + will be reviewed in detail preparing you for daily machine operation.
Fee: $270
COURSE: W 120 CFi/W 150CFi Series Cold Milling Technical Service
This course covers safe work practices on and around cold milling machines. You will learn factory-recommended maintenance practices for proper maintenance of W 120CFi cold milling machines. After completing this course, you will be better prepared to diagnose machine problems and increase machine uptime.
W 120CFi/W 150CFi includes only “CFi - models” and does NOT cover the previous W 120Fi or W 150Fi models.
Fee: $405
COURSE: WR 200 Series Cold Recycling Operation
The purpose of this course is to familiarize you with the machine and its many components.Safety practices, machine safety documentation, and safety components will be covered. The controls and functions will be covered in detail. Finally, we will examine daily machine maintenance and component wear identification.
Fee: $270
COURSE: WR 200 Series Technical Service
The WR 200 Series Soil Stabilizer will be the focus of this course. This course covers safe work practices on and around soil stabilizer machines. You will learn factory-recommended maintenance practices for proper maintenance of WR 200 series soil stabilizer machines. After completing this course, you will be better prepared to diagnose machine problems and increase machine uptimes.
Fee: $405
COURSE: WR 200 Series Pump Systems
By attending this course you will be introduced to the optional pump systems installed on the WR200 Series Cold Recyclers. Safety during operation is very important and we will cover this topic. You will receive Wirtgen recommended set-up and operation instruction.
Fee: $135
VÖGELE
COURSE: Vögele Paver Operations/Application
This course covers how to safely operate and work around a Vögele paver. You will learn factory-recommended best practices for machine operation and for performing daily and scheduled maintenance. After completing this course, you will be better prepared to operate a Vogele paver according to manufacturer’s recommendations. You will learn principles and concepts of paving related to the operation of the Vögele paving machines.
Fee: $270
COURSE: Vögele Super 700 -3 Technical Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Vision Super 700 -3 paver. You will learn factory recommended best practices for doing service repairs and troubleshooting electrical control systems and hydraulic systems of the Super 700 -3 paver. You will get an in-depth look at all controls and displays associated with paver series.
Fee: $250
COURSE: Vögele Super 2100 -2 Technical Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Super 2100-2 paver. You will learn factory-recommended best practices for doing service repairs and troubleshooting electrical control systems and hydraulic systems of the Super 2100-2 paver. You will get an in-depth look at all controls and displays associated with paver series.
Fee: $540
COURSE: Vögele Vision 8-ft -2 Vision Technical Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Vision 8-ft. -2 paver. You will learn factory-recommended procedures for doing service repairs and for troubleshooting electrical and hydraulic systems. You will get an in-depth look at all controls and displays.
Fee: $405
COURSE: Vögele 10-ft. -2 & -2i Vision Technical Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Vision 10-ft. -2 & 10’-2i paver. You will learn factory recommended procedures for doing service repairs and troubleshooting electrical and hydraulic systems. You will get an in-depth look at all controls and displays.
Fee: $540
COURSE: Vögele 10-ft. -3i Super Technical Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Super 200X-3i paver. You will learn factory-recommended procedures for doing service repairs and troubleshooting electrical and hydraulic systems. You will get an in-depth look at all controls and displays.
Fee: $540
COURSE: Front-mounted Screed Technical Service
This course covers the fundamentals of setting up and executing work on all front-mounted screeds used on Vögele pavers. You will learn how a screed operates and perform the setup procedures for daily paving operations. You will learn which parts of the screed are considered wear items.
Covers: Carlson, VF500 & VF600.
Fee: $250
COURSE: Vögele MT3000-2 Offset Operation & Application
This course will introduce you to the paving principles and concepts of material transfer while paving. Instruction will be restricted to the operation of the Vögele Transfer Machines.
Fee: $405
COURSE: Vögele MT3000-2 Offset Basic Service
After completing this course, you will be better prepared to perform service repairs and diagnose operational problems of the Vögele Transfer Machines. You will learn factory-recommended procedures for doing service repairs and for troubleshooting electrical and hydraulic systems. You will get an in-depth look at all controls and displays.
Fee: $405
KLEEMANN
COURSE: MC EVO Series Jaw Crusher Operation and Maintenance
In this course, you will learn about the electrical and hydraulic systems that control functions of the MOBICAT EVO jaw crushing equipment. You will learn how to troubleshoot components using electrical diagrams, hydraulic schematics, and other Kleemann resources. You will learn what items require regular servicing / maintenance and how to correctly setup themachine for operation.
This course covers MOBICAT EVO Crushers (MC EVO Series).
Fee: $270
COURSE: MR1xx EVO 2 - Series Crusher Operation and Maintenance
In this course, you will learn about the electrical and hydraulic systems that control functions of the MOBIREX EVO2 Impact Crushers. You will learn how to troubleshoot components using electrical diagrams, hydraulic schematics, and other Kleemann resources. You will learn what items require regular servicing/maintenance and how to correctly setup the machine for operation.
This course covers MOBIREX EVO 2 Impact Crushers (MR Evo2 Series).
Fee: $270
COURSE: MS Series Screen Operation and Maintenance
You will learn about the electrical and hydraulic systems that control functions of the Mobiscreen screening systems. You will learn how to troubleshoot components using electrical
diagrams, hydraulic schematics, and other Kleemann resources. You will learn what items require regular servicing/maintenance and how to correctly setup the machine for operation.
Fee: $135
WIRTGEN GROUP
COURSE: WITOS FleetView Basics
This course will allow you to navigate through the different views within WITOS FleetView. You will explore ways to track machines, schedule alerts for maintenance and radius parameters as well as easily export historical data.
Fee: $135
AC
