Based on a four-blade extreme-duty brush cutter, this commercial-grade, low-flow model uses an open front design with a heavy-duty push bar.
- Oversized direct drive unit hosts a 2 5/8-in. drive shaft with two 4 1/2-in. bearings submerged in oil
- Bi-directional Eaton Char-Lynn motor requires a minimum of 16 gpm to cut up to 6-in. trees
- Double-edged blades allow the unit to be run one direction for heavy cutting and the other for grass
Fill out the form below to request more information about Brush Cutter
