Decoy GPS System

Jun 19th, 2007

Decoygpssystem 10078686

The Decoy GPS system and warning decal serve as a low-cost theft deterrant.

Cutting wires to system disables the starter of the machine
10-minute permanent installation
HeavyTrack

Fill out the form below to request more information about Decoy GPS System

Abrasives where abrasive material is sprayed onto a nylon pad are used for maintenance and light restoration.

Abrasives 101

Learn how to choose the correct abrasives for grinding and polishing concrete.

Unicontrol and Level Best, united in their commitment to driving innovation and efficiency in the construction industry, aim to push the boundaries of construction technology, setting new benchmarks for excellence as the industry becomes increasingly receptive to these advancements.

Unicontrol to Integrate 3D Tech With Level Best Equipment

By integrating Unicontrol's 3D machine control system with Level Best's precision grading equipment, this partnership aims to raise standards in machinery efficiency and usability.

The electric-powered excavator can be charged rapidly using the PowerTree.

DEUTZ Highlights Eco-friendly Parts, Software

The company will showcase the TCD 3.9 engine in the sub-4 liter category along with an electric excavator, powered by DEUTZ Electric System, and the DEUTZ PowerTree mobile rapid charging system at INTERMAT.

Gerrit Marx.

CNH Names CEO

Gerrit Marx will succeed Scott Wine as of July 1.

Dsc00805 Edited

The Top 25 Pavement Maintenance & Reconstruction Products 2024

After a few years hiatus, the Top 25 Pavement Maintenance Products is back and will be better than ever!

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Changing Colors: Yanmar Turns to Red

As part of the company's shift in market approach, execs explain the strategy behind the brand's 2020 departure from conventional yellow machine livery to today's Premium Red.

The RTH 10.37 has a lifting height of 120 ft., 5 in. and a maximum lift capacity of 22,700 lbs. for handling heavy loads.

Magni Introduces RTH 10.37 Rotating Telehandler

The RTH 10.37 has a lifting height of 120 ft., 5 in. and a maximum lift capacity of 22,700 lbs. for handling heavy loads.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

OTR to Open Factory in Mexico

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

New SealMaster Santa Ana Storefront Distribution

SealMaster Continues Western Expansion

SealMaster acquires Martin Marietta Miramar sealcoat manufacturing plant.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

Volvo Ce Pioneers E Shuttle Service To Cut Transport Emissions 660d7bf383081

Volvo Construction Testing Out Excavator Delivery in France With E-shuttle

The e-shuttle service is designed to reduce emissions during the first transport leg of construction machines from the Volvo CE factory in France.

FIRSTGREEN Industries launches ROCKEAT electric skid steer loader, pioneering powerful, safe and zero-emissions solution for mining, construction and other hazardous industries.

New Electric Skid Steer Loader by First Green

ROCKEAT produces zero carbon emissions, minimum operating fluids and near-silent operation, and offers a low clearance, 360-degree camera and remote operability.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.

XCMG Launches G2 Cranes

The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.

The new engine platform will be equipped with Cat Digital Services, an integrated suite of software and hardware solutions supplying the insight equipment owners need to make decisions and secure the health of their equipment.

Caterpillar Announces 13L C13D Diesel Engine for 2026

The new engine platform offers up to a 20% increase in power and up to 25% more low-speed torque than the previous generation of Cat engines in its power class.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

A quality diagnostic tool is key for a smooth repair process. With the right tool, technicians have support in making comprehensive repair decisions.