Thermal Arc Fabricator 252i Inverter

October 9, 2012

Victor Technologies International Inc.

Victor Fabricator 252i 10811626

The 66-lb. Thermal Arc Fabricator 252i "3-in-1" MIG-Stick-TIG welding system offers process flexibility for a range of applications on steel, stainless and aluminum and other alloys.

5- to 300-amp output range (250 amps at 40% duty cycle) for thin to 1/2-in.-thick steel
Advanced inverter technology optimizes arc performance for all three welding processes
Comes with a TWECO Spray Master 250-amp MIG gun, TWECO WeldSkill 200-amp Stick electrode holder and Victor EDGE regulator

Fill out the form below to request more information about Thermal Arc Fabricator 252i Inverter

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

A quality diagnostic tool is key for a smooth repair process. With the right tool, technicians have support in making comprehensive repair decisions.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

The new products include the 20V MAX* Hydraulic Knockout Tool (DCE600), 20V MAX* XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX* XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

DEWALT Releases 20V MAX Knockout Tool and Bandsaws

The new products include the 20V MAX Hydraulic Knockout Tool (DCE600), 20V MAX XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Tenna Unveils TennaCAM 2.0 Heavy Equipment Camera

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

Diablo Tools AMPED Rebar Demon 4-cutter Hammer Drill Bit System

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

DICA Offers EnviroMat and XtremeMat from Ground Guards U.S.A.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Miller Electric Introduces Bobcat 265 Air Pak and Trailblazer 330 Air Pak Welders

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Diamondback 701 Tool Vest with Twiceme

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Equipment dealers have expressed great concern with the rule, particularly as it relates to service and delivery trucks, as well as the cost increases and equipment delivery delays that will ensue.

AED Opposes California Rule on Internal Combustion Trucks

The ACF regulation requires fleet operators to phase out their internal combustion trucks and replace them with zero-emission trucks, starting in 2024.

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

Mi-T-M Launches HSP Series Pressure Washers

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

Milwaukee Tool and Columbus McKinnon Unveil M18 Compact 1-Ton Chain Hoist with One-Key

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

KNAACK Introduces Armored Transport Cart

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

WEATHER GUARD Launches 2024 Saddle and Lo-Side Boxes

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

WEATHER GUARD Releases Headache Racks for Truck Protection

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

The MAC-Link represents the evolution of PSG's Modular Access Control (MAC) product line, bridging the gap between large-scale infrastructure projects and small city-oriented construction sites.

Portable Solutions Group Introduces MAC-Link Safety Management Solution

The MAC-Link represents the evolution of PSG's Modular Access Control (MAC) product line, bridging the gap between large-scale infrastructure projects and small city-oriented construction sites.

The TDL450B radio is a wireless UGH data radio built for daily use in harsh conditions and includes an add-on fan tray for impact and weather resistance.

Trimble TDL450B Radio

The TDL450B radio is a wireless UGH data radio built for daily use in harsh conditions and includes an add-on fan tray for impact and weather resistance.

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

A quality diagnostic tool is key for a smooth repair process. With the right tool, technicians have support in making comprehensive repair decisions.