Viatec has launched SmartPX, a plug-in, all-electric alternative to gasoline or diesel generators. SmartPX is a true electric genset that, unlike an inverter, uses a rotary generator to produce pure sine-wave 120V AC/240V AC power to run demanding equipment, creating a quiet worksite for operators and helping organizations meet ESG goals.
SmartPX was piloted on step vans for east-coast utility provider Duke Energy, collaborating with Viatec to develop its “Smart” family of products to meet fleet-level emissions goals.
“When Duke Energy approached us with the challenge of electrifying their fleet of step vans, it felt like the right fit. After a successful pilot and fleet-wide adoption of SmartPTO, we were eager to tackle a new set of challenges. Through this effort SmartPX was born,” said Mark Ferri, CEO of Viatec.
During the pilot, SmartPX was installed on a Utilimaster step van upfit to supply power to an array of tools and equipment – including a rooftop HVAC unit, a 4-hp trash pump used to clear water and debris, internal and external 120V outlets, an external 240V outlet for heavier equipment and 12V power to maintain vehicle batteries. Diesel generators typically installed on these vehicles cannot be used while driving, produce noise and emissions at the jobsite and do not survive through the service life of the vehicle. SmartPX represents both, an overall improvement in performance, and a lifecycle that is 2-3 times longer than the genset it replaces.
Individuals can recharge overnight with a standard 120V outlet at an operations center or residentially. SmartPX can also be recharged using a Level II EV charger.
