Concrete > Concrete Equipment & Products > Curbers | For Construction Pros

Hydronic heaters provide an even distribution of heat to the concrete. Here, a poly sheet covers a slab-on-grade. Hydronic heating tubes were placed on top of the poly and the entire system is being covered with insulated blankets.

How to Protect Concrete During Cold Weather Pours

Cold weather concreting requires contractors to maintain minimal concrete temperatures to ensure proper strength gain and cure.

What ASTM D8505 FRP Means for Concrete Contractors

How ASTM’s New FRP Rebar Spec Enables Concrete Contractors

The ASTM D30 Committee announced an additional standard specification for the fiber-reinforced polymer (FRP) reinforcement bars. Here’s what that means for the concrete contractor and concrete construction.

EDCOs New PCD Drum

EDCOs New PCD Drum

EDCO's CPM-8 scarifier grinds down trip hazards leaving a textured, level, slip-resistant surface.

The CC-1200e Battery-Powered Curb Machine

The CC-1200e Battery-Powered Curb Machine

In development for almost two years, GOMACO Corp's CC-1200e battery-powered slipform curb machine is equipped with a power dense 48 VDC lithium-ion battery pack capable to slipform a 24-in. (610 mm) radius, depending on the mold profile.

Concrete Curb Custom Drum Designs for Unique Shape Requirements

Custom Drum Designs for Unique Curb & Gutter Shape Requirements

Improve efficiency, reduce labor and boost productivity by pairing with a Hydra-Screed 3000 to find a faster production time and a quality finish.

Collect Concrete Profits with a Curb Rolling Machine

Collect Concrete Profits with a Curb Rolling Machine

How implementing a walk-behind curbing machine can open doors and increase profits.

Curb Roller Tim Smith

Tim Smith Joins Curb Roller Manufacturing’s Outside Sales Team

Smith will support the Midwest territories and Colorado, focusing on distributor relationships, product training and end-user support.

Curb Roller Manufacturing offers the Curb Roller CM4000, a single-operator machine for shaping concrete for curb and gutter work. The CM4000 reduces the labor of shaping curb and gutter pours, allowing crews to complete work up to twice as fast as manual methods or face forming.

Curb Roller Manufacturing Reduces Curb and Gutter Labor with the Curb Roller CM4000

The Curb Roller CM4000 is a single-operator machine designed to cut the labor of shaping curb and gutter pours.

Screen Shot 2020 02 05 At 3 29 48 Pm

[VIDEO] Curb Roller CM4000 Speeds Up Curb and Gutter Creation

Curb Roller's CM4000 hydraulically driven curb and gutter machine features two-way variable speed control, adjustable guide ring for uniform curbs and 30 different available profiles.

Screen Shot 2020 02 05 At 3 30 11 Pm

[VIDEO] Curb Roller’s Batt Screed for the Small Concrete Contractor

Designed with the smaller contractor in mind, Curb Roller’s battery-powered roller screed uses the DeWalt Flex Volt battery making servicing or replacing the battery simple through any DeWalt dealer.

LPI added Topcon Positioning Systems' Millimeter GPS Paving System to its Power Curber 5700-C in 2018.

Florida Curb and Gutter Firm Solves Labor Issues with Stringless Solution

For Lenard Powell Inc., the move to Topcon's Millimeter GPS Paving System has resulted in a better product, improved production rates and a smaller workforce.

Power Curber 5700 D 1

5700-D Curb Machine

The 5700-D slipform curb machine, which replaces the 5700-C, features the Power Curber SlipSmart Control System that comes ready to interface with Topcon, Leica, and Trimble 3-D/Stringless systems

The new roundabout project joins SR 129 with Fleshman Way, which motorists use to travel east across the Snake River from Clarkson, WA, to Lewiston, ID.

Knox Concrete Curbs and Stamps Roundabout Project

Idaho contractor completes first major state highway project with curbing and stamping skills honed on numerous successful residential and commercial projects throughout Lewiston and surrounding area.

6 7% Cross Slope

Power Curber 7700 Slipform Paver

The Power Curber 7700 is a multipurpose slipform machine designed for a wide variety of offset applications and paving up to 20 ft. wide

Miller Formless and Guntert & Zimmerman Form Strategic Alliance

The two companies will share industry knowledge, establish a common dealer network and market each others' products and services

Autopilot is a Wirtgen proprietary system that uses GNSS along with a base station for steering and offers several options for grade control: robotic total station, ultrasonic sensor, laser and GNSS. The instruments needed for this system are typically less expensive up front and for daily use.

3D Technology Simplifies Concrete Paving Operations

The absence of stringline allows easier access on paving projects.

Video: ConTech’s iTerra Electronic Control System Revolutionizes Phoenix Curber Machine

Video: ConTech’s iTerra Electronic Control System Revolutionizes Phoenix Curber Machine

Phoenix Curber's iTerra control system provides ease of use and setup for cross-slope and grade configuration, with no separate control boxes required

Phoenix iTerra 9 54caa69896b02

iTerra Controller for Curb and Gutter Machines

Controller is designed for mid-sized curb and gutter machines

There was six miles of curbs throughout the development that TACC carved out and fine graded them with 3/4-inch stone as prep for the asphalt paver and placed the concrete curb and gutter using its Power Curber 5700-C with Topcon Millimeter GPS machine control.

GPS Machine Control Curbs Costs on Huge Residential Subdivision

Contractor uses Topcon Millimeter GPS machine control on its Power Curber 5700-C curb and gutter machine, eliminating stringlines and saving time, labor and concrete waste

Form-Botic Curb and Sidewalk Machine

Fcp Curb Fox 2000 10938081

Curb Fox 2000

Upgrade Your Masonry Cutting Game with Lightning-Fast Technology

Upgrade Your Masonry Cutting Game with Lightning-Fast Technology

Taller segments, superior diamonds, and SPEED-Edge slot design make these Cut-Off Discs game changers!

1660628632 10874490

Video: Phoenix Curbers Curbie Curb Cutting Machine

Ed Taylor, vice president of product development for Phoenix Curbers, talks about the changes the company made to a curb cutting saw to adapt it for more cutting applications

Curb Pro3 10831297

Curb-Pro

Curb Roller Curb Roller 2

Curb Roller CM4000

The Curb Roller, a 160-lb roller screed for curbs, meets the needs of small to large sized contractors by offering relief from hand forming without the high price of machines.

Hqdefault 10784152 jpg

Video: How to Make Money with the Lil' Bubba Curb Machine

Profile of a project from estimate to cleanup showing how the Lil' Bubba Concrete Curbing Equipment works and how much profit a typical project turns (3:56 min.)

Fcp Bubba Curb 10784150

Lil' Bubba Curb Machine

4-hp concrete curber stamps stone, brick or wood patterns in curbs up to 8 by 12 in.

Messinger 10776050

5000T-HD Slipform Paver

With optional heavy-duty tracks, the Curb Fox 5000T-HD slipforms pavement up to 10 ft. wide and barriers up to 36 in. high

Easi Pour Compact 880 Working 11108994

Easi-Pour Compact 880

Trims and pours simultaneously, pouring a barrier up to 42 in. high and paving flat work up to 8 ft. wide

1660628632 10644012

Phoenix Curb Machines' 7500 & 2500

Features and benefits of the new 7500 and 2500 curb machines from Phoenix Curb Machines.

Curbpro 10634584

Curb-Pro

Phoenix7500curbmachineworldofc 10625993

Phoenix 7500 Curb Machine - World of Concrete 2012

Ed Taylor, Phoenix Curb Machines inventor, discusses how contractors can increase profits with the Phoenix 7500, which pours up to 50-60 ft./min. and is easily transported behind a one-ton pickup.

Contechpicsphoenix7500augursid 10612554

World of Concrete 2012 Premieres High-Tech Compact Curber

Technology could lower costs and increase profits for specialty concrete contractors