SKYDECK

PERI Formwork Systems, Inc.
Skydeck 2
PERI Formwork Systems

As a lightweight, panelized slab formwork, SKYDECK enables safe and fast forming with a simple and systematic assembly sequence and fewer props. SKYDECK was designed for standard use in constructing slabs with thicknesses up to 17 inches. The well thought out design with drophead feature allows for early striking of the deck materials and reduces on-site material required.

Fill out the form below to request more information about SKYDECK
Latest in Forms
Concrete Repairs Made Simple
Sponsored Content
Concrete Repairs Made Simple
September 9, 2025
Img 7494
Report on ICF Compliance to NFA 285
August 12, 2025
Concrete Repairs Made Simple
Sponsored Content
Concrete Repairs Made Simple
September 9, 2025
The new generation of the MAXIMO Panel Formwork is one more way PERI is contributing to greater sustainability. The coating, the PERIskin, not only offers long-term corrosion prevention for the formwork, it also saves a significant amount of energy during the production process.
MAXIMO Panel Formwork
April 17, 2025
Related Stories
BIM was a central element to the library’s construction, allowing for scheduling and clash detection. Morley used Revit to build every column, wall and piece of concrete and detect conflicts floor by floor. Each week all subcontractors were required to submit their updated BIM files to Turner to update the master BIM file.
Concrete Equipment & Products
A Study in Architectural Forming
The basic profile of a MonoKast wall includes a 10-inch wide header beam at the top and a 10-inch wide footing beam at the bottom; both of which are 3-1/2 inches thick with solid concrete and reinforced steel. The concrete shell is two inches thick, fiber reinforced, and is 5,000 psi code compliant.
Concrete Equipment & Products
The Evolution of a Poured Wall Contractor
Alternative Green Concrete Forms and Concrete Footings
Forms
Getting Off On a New Foot
Concrete Repairs Made Simple
Sponsored Content
Concrete Repairs Made Simple
More in Forms
Forms
From Precast to Printed: A Guide to Modern Residential Concrete Construction
Nonquit Homes
New building methods deliver durability, speed, and efficiency while eliminating many of the old drawbacks of concrete construction.
Tilt Up Drone
Forms
Report on ICF Compliance to NFA 285
National Ready Mixed Concrete Association (NRMCA)
The National Ready Mixed Concrete Association published a report on a study examining exterior wall construction of ICF and their compliance to NFA 285.
Img 7494
Forms
SKYFLEX Slab Formwork
PERI Formwork Systems, Inc.
The forward-looking SKYFLEX slab formwork accelerates formwork processes with the patented drophead for early striking and the small number of props.
The forward-looking SKYFLEX slab formwork accelerates formwork processes, for instance with the patented drophead for early striking and the small number of props.
Forms
MAXIMO Panel Formwork
PERI Formwork Systems, Inc.
The next-gen MAXIMO Panel Formwork combines the advantages of the previous stage of development to make it even more versatile, increase its durability and user-friendliness, and improve sustainability on construction sites.
The new generation of the MAXIMO Panel Formwork is one more way PERI is contributing to greater sustainability. The coating, the PERIskin, not only offers long-term corrosion prevention for the formwork, it also saves a significant amount of energy during the production process.
Forms
HECON Heated Formwork
PERI Formwork Systems, Inc.
The HECON Heated Formwork system heats concrete to help produce good concrete results.
The HECON heated formwork maintains constant temperatures during concrete curing. This is especially important for new, CO2-reduced concrete mixtures to achieve high-quality results.
Forms
Capform Places Foundation of Waldorf Astoria Miami Hotel
Capform Inc.
When an 18-ft. thick mat slab for a new building in South Florida needed placement, concrete contractor Capform Inc. stepped up.
Img 3740
Forms
PhD Student Designs New Concrete Floor Solution
An architecture PhD student at ETH Zurich has developed a reportedly simple solution for building concrete floors in a more climate-friendly way - saving on concrete material and steel used due to its lightweight, robust, and reusable formwork design.
Unfold Form consists of a plywood sheet cut into individual curved strips with textile layers applied to one side to connect them. The plywood strips can be unfolded like a fan on site, causing them to bend into shape.
Concrete
'Concrete Is Cool': Grindline Skateparks Inc.'s Work on Northwest Skatepark
Heidelberg Materials
How skateboarders turned concrete craftsmen accomplished award-winning concrete work in a Washington state skatepark.
North Bend Formwork 1 Courtesy Grindline
Concrete
Choose The Right Blade When Making Forms
Diablo
5 ways a premium demolition blade will help in concrete forming.
Demo Demon Image2
Forms
Forming A Concrete Repair With An Unexpected Material ... Hair
Students at the University of Kentucky are taking an old idea and applying modern sustainable ideas to create a new, biodegradable fabric to help with concrete repairs.
Using Human Hair in Concrete Repair
Forms
Essential Tips for Completing Successful Concrete Forming Projects
Concrete Contractor Premium Content
Discover essential tips and advice from expert columnists on vertical concrete placement for a successful forming project including safety precautions, how to properly define consolidation issues and how to optimize your wooden form panels.
Verticle Concrete Placement
Concrete Equipment & Products
A Study in Architectural Forming
Morley Construction faced a tight schedule and intricate architectural concrete forming requirements on the new San Diego Central Library, which was designed by Rob Quigley and destined to become an iconic figure in the city’s skyline.
BIM was a central element to the library’s construction, allowing for scheduling and clash detection. Morley used Revit to build every column, wall and piece of concrete and detect conflicts floor by floor. Each week all subcontractors were required to submit their updated BIM files to Turner to update the master BIM file.
Page 1 of 30
Next Page