Continue to Site »
Site will load in 15 seconds

Sturdi Saw 1 Concrete Saw

Tiger Equipment LLC
Sturdisaw1concretesaw 10078256

The Tiger Sturdi Saw 1 concrete saw is constructed with a rugged, one-piece frame, three-belt arbor drive, and 1 1/4-in. alloy steel arbor shaft.

  • 18-in.-capacity hinged, bolt-on blade guard with Laminar flow water system
  • 8-in. rear and 4-in. front wheels
  • 13-hp Honda OHV engine with Cyclone air filter
Fill out the form below to request more information about Sturdi Saw 1 Concrete Saw
Latest in Walk-Behind Saws
3 Common Engine Faults to Watch For
Sponsored Content
3 Common Engine Faults to Watch For
October 1, 2026
Industrial warehouse with Toyota forklift navigating between red safety barriers and yellow guardrails under bright LED lighting.
Joints Done Right
August 12, 2026
3 Common Engine Faults to Watch For
Sponsored Content
3 Common Engine Faults to Watch For
October 1, 2026
Screenshot 2025 03 13 At 9 20 35 Am
Precision & Power: The Multicut 575 Floor Saw
March 18, 2025
Related Stories
1176843528694 10298638
Walk-Behind Saws
New cutting edge technology
1155155647402 10300466
Jobsite Equipment
Selecting Concrete Cutter Applications
1146583224794 10304712
Jobsite Equipment
Select Saws for Productive Cuts
More in Walk-Behind Saws
Personal Protection Equipment
OSHA Silica Compliance: What Concrete Contractors Need to Know
WC Safety
Table 1 can simplify silica compliance, but specific tasks, work conditions and respirator requirements can quickly change what contractors need to do.
Overhead view of safety equipment including hard hats, respirators, gloves, goggles, and ear protection on wooden surface
Slabs & Flatwork
Joints Done Right
The Euclid Chemical Company
Why concrete joint design and filling determine long-term slab performance.
Industrial warehouse with Toyota forklift navigating between red safety barriers and yellow guardrails under bright LED lighting.
Concrete Equipment & Products
LISSMAC Introduces Compact Cut 450 Self-Propelled Floor Saw
LISSMAC Corporation
The LISSMAC Compact Cut 450 is a self-propelled floor saw designed for precision and maneuverability.
Compact Cut 450
Walk-Behind Saws
Precision & Power: The Multicut 575 Floor Saw
LISSMAC Corporation
The Multicut 575 is well-suited to meet the challenges of concrete cutting, repair, and beyond.
Screenshot 2025 03 13 At 9 20 35 Am
Concrete Equipment & Products
How to Choose the Right Concrete Saw for the Job
United Rentals Inc.
Using an appropriate saw and blade is key to maximizing efficiency and ensuring precise, reliable cuts.
How to Choose the Right Concrete Saw for the Job
Jobsite Equipment
Milwaukee Tool Adds Cordless Tools to MX FUEL Equipment System
Milwaukee Tool Corp.
This system, now over 25+ solutions, eliminates exposure to emissions and tripping hazards in work areas.
This system, now over 25+ solutions, eliminates exposure to emissions and tripping hazards in work areas.
Saws - Other
US DOL Launches Initiative to Protect Workers From Silica Dust
Occupational Safety & Health Administration
The U.S. Department of Labor's Occupational Safety and Health Administration launched a new initiative focused on enhancing enforcement and providing compliance assistance to protect workers against silica dust exposure.
US DOL Launches Initiative to Protect Workers From Silica Dust
Construction Safety
Top 5 Dangers of Working With Heavy Equipment
Heavy Equipment Colleges of America
The construction industry accounts for a large number of yearly work-related fatalities. There are ways to prevent this by following protocol and knowing the heavy equipment you are working with.
While you can’t predict when a heavy equipment-related accident will occur, should be aware of particular actions that are most likely to cause an accident.
Saw Blades & Chain
Ulti-Grit Diamond Blades For Flat Saws
Husqvarna Construction Products
Husqvarna's Ulti-Grit series of diamond blades is a completely new design using the latest advances in controlled diamond distribution.
Ultra Grit 4
Walk-Behind Saws
No Gas, No Regular Maintenance, No Emissions: The MX FUEL 6-in. Green Concrete Saw
Milwaukee Tool Corp.
Milwaukee Tool continues to invest in and disrupt the form-to-finish process with new innovative solutions in the MX FUEL Equipment System. This 6" Green Concrete Saw is just the start.
Milwaukee Tool MX FUEL 6-in. Green Concrete Saw
Concrete Equipment & Products
A Specification Guide on 23 Concrete Saws
Concrete Contractor Premium Content
Specifications and technical data to help you choose your next concrete saw.
Conc Spec Guide Image
Walk-Behind Saws
The Norton Clipper C914P Compact Push Saw
Saint-Gobain Abrasives
The Norton Clipper C914P Compact Push Saw
Page 1 of 9
Next Page