Caterpillar 990H Wheel Loader
The 990H replaces the 990G Series II, yet retains features such as an impeller clutch torque converter, Rimpull Control System and STIC control system.
- Loads 60- to 70-ton trucks in the standard lift arrangement and 100-ton trucks in the high-lift arrangement
- 16.5-ton rated payload in the standard lift arrangement and a 171,642-pound operating weight
- Bucket capacities from 11.0 to 12.0 cubic yards
- 627-hp Cat C27 ACERT engine
IMT SiteStar Lube Skid
The SiteStar lube skid delivers contaminant-free oil, coolant and water to jobsites.
- Fits in the back of IMT Dominator mechanics trucks
- Consists of impact-resistant polyethylene tanks and hose reels
- Three integrated lift points allow for easy removal
- 220-gallon capacity split between 55-gallon tanks available in eight possible configurations
- 50-inch width allows for installation in any properly rated truck
Terex Load King SA70
The 70,000-lb. SA70 hydraulic sliding axle trailer includes a 12,000-pound line pull winch (20,000-pound optional) and a 6.5-degree load angle.
- 15-degree dump angle
- 20 D-Rings and multiple chain slot design
- Features 80/100 KSI steel, cambered deck beams, crossmembers on 8-in. centers and Apitong decking
- Hendrickson Turner HT air ride suspension
Sirocco 3K HTI from Airstar America
The Sirocco 3K HTI from Airstar America is designed to replace traditional floodlights on light towers.
- Glare-free light
- Can be adapted to existing tower
- Will illuminate 72,000 square feet, 360 degrees with 300,000 lumens
Anton Paar SmartPave DSR
The SmartPave from Anton Paar is a dynamic shear rheometer (DSR) combined with a new Peltier heating system.
- New easy-to-use software
- Fully automatic temperature calibration (no water flow around sample)
- Fast Peltier heating and cooling
Zanetis Skid-Steer Cold Planers
These second-generation cold planer attachments are rated for systems with output up to 42 gpm at 5,000 psi.
- Planetary torque hub driven by a piston motor
- Driveline submerged within the chassis, eliminating the possibility of damage and increasing side clearance
- Available in 16-, 18-, 24-, 30- and 40-inch cutting widths
MobyDick Dragon
MobyDick's Dragon drive-through wheel washing system is automatically activated via a sensor.
- Wash area provides one complete wheel revolution for light tire soiling applications
- Compact dimensions for easy transport and setup
- Automatic water recycling
InstroTek Model 3500 Xplorer
The model 3500 Xplorer moisture density gauge from InstroTek Inc. features the most up-to-date electronics, improved performance and straight forward, simple operation.
- Menu options are easy to read and navigate
- Backlit LCD screen and special scroll functions allow operators to easily read the two-line display during day or nighttime work
- Unit has been thoroughly tested for ruggedness and accuracy
- Battery Saver and InteliCharge extend battery life keeping the gauge on the job instead of on the charger
Topcon RT-5SW Dual Slope Laser
The long-range, dual-slope RT-5SW laser has five-arc-second accuracy, less than 1/32nd of an inch per 100 feet.
- SmartLine automatic guide alignment system
- Automatic grade matching
- Remote control enables operation from 1,000 feet.
- Verify adjustments from machine cab
Eager Beaver Paver PT Series Trailers
Paver PT Series is designed to safely load rollers, pavers and milling machines.
- Low front approach
- Tapered ramps and gradual slope
- Low load angle