Buses full of social media personalities throughout the trades come to a stop. As riders depart, a corridor of employees applauds and welcomes everyone. It’s loud. It’s energy. It’s an intense way to start the morning. This is PIPELINE. This is where Milwaukee Tool makes early announcements ahead of the Fall 2026 to early 2027 2027 tradeshow season, allowing attendees to get close and personal with everything on display. And there was plenty on display.
Attendees included carpenters, electricians, mechanics, landscapers, concrete contractors, and more. Everyone has speculations on what to expect and a wish list of tools and features they would like to have for their job. (Did someone say refrigerator? Hot lunch container? Yup. See below.)
The company’s goal is to advance the trades as they continue to move forward. The demographics of attending social media personalities were deliberate. They represented the skilled trades and put a face to the daily complexities of the modern trades.
“You're continuing to get more demands on you every single day, tighter timelines, higher expectations. I know because I confirmed it spending time with you…over the years, and spending time in the field, is the skilled trades don't complain,” says Shane Young, group president of Milwaukee Tool during the general session. “They don't create excuses. They figure out how to get the job done. They continue to hone their craft. They continue to build upon their skills, and that's what we get the opportunity to do. That's what today is all about.”
He adds, “Thank you for all that you do to work with us to advance the trades forward. I think we'd all agree that the future is built with skilled hands. We are all fortunate to work alongside of them to help grow with them and move with them into the future as those challenges continue to change.”
Jonathan Kozlowski - IRONMARKETS
Over 100 new world solutions were on hand, adding to the standing hundreds already on Milwaukee Tool's cordless platforms. That’s right. Over 100 new products are launching through early 2027. Grouped by category, here are more than a few highlights.
Jonathan Kozlowski - IRONMARKETS
They started the announcements by enhancing the M18 REDLITHIUM line with the new M18 High Output XC5 battery. This will be a full replacement for the prior 5.0. It comes with claims to deliver 50 percent more power (than the former version) and added durability.
Milwaukee Tool continues to aim at converting gas, pneumatic, and corded power to the battery with the new M18 REDLITHIUM FORGE HD15 with “the most power, longest runtime, and fastest charging experience in the same size as the FORGE HD 12.0.
New batteries are only good if charged, so they also announced the M18 and M12 Four Bay Simultaneous Super Charger featuring their COOL-CYCLE Active Cooling System and the M18 TOP-OFF 350W Power Supply & Charger — both are compatible with PACKOUT.
PIPELINE even brought out an old wheel loader to try out the new sockets and impact wrenches for heavy-duty equipment maintenance tasks.Jonathan Kozlowski - IRONMARKETS
Transportation
M18 FUEL 3/4 in. High Torque Impact Wrench and M18 Fuel 3/4 in. Extended Anvil High Torque Impact Wrench (both with One-Key) were designed to meet the demands of heavy-duty technicians. The next-generation 3/4 in. and new 3/4-in. extended anvil high torque impact wrenches provide the performance required to replace pneumatic tools while delivering the mobility and convenience of cordless. (Launch date Q4 2026)
M18 FUEL Grease Gun - Productivity for technicians who grease in high volumes, with faster pumping, easier stuck coupler removals, and quicker reloads. Powered by a POWERSTATE Brushless Motor, the M18 FUEL Grease Gun provides performance, pumping up to 60 percent faster than competitive solutions to reduce time spent on zerks. (Launch date December 2026)
Finally updated since its original launch in 2019, the new M18 FUEL 9 in. Cut-Off Saw was redesigned from the ground up. Feedback from the industry on the original noted that it needed more power, more runtime, and more thermally capable. The new saw uses completely different internals, much larger heat sinks, and the new FUEL HC15 batteries provide over double the runtime (from 4.5 ft. to 10 ft.).Jonathan Kozlowski - IRONMARKETS
General Contractor & Utility
This was a fairly normal looking SUV at the beginning of the day. It had a door and full roof.Jonathan Kozlowski - IRONMARKETS
The M18 FUEL 18 lbs SDS MAX Demolition Hammer delivers performance for chipping floors, walls and columns and reportedly hits harder than 18lb corded, delivering 11.4 ft-lbs of impact energy. (Launch date November 2026)
Power Tool Accessories
The 6-1/2 in. 24T NITRUS Carbide Framing & Demolition Circular Saw Blade offers the Fastest Cutting and Longest Life in Framing and Demolition Applications. The NITRUS Carbide performance provides the ability to take this blade from aggressive demolition applications back to clean wood cutting, which reduces blade changes and maximizes productivity. (Launch date October 2026)
The 45-piece SHOCKWAVE Impact Duty Bit Sockets feature a Wear Guard Tip, delivering a precise fit that prevents stripping and protects the fit over the life of the bit socket. (Launch date January 2027)
The 10 piece SHOCKWAVE Impact Duty Swivel Sockets are the most durable swivel sockets. Featuring SECURESWIVEL Pinless Joint, delivering a strong connection that prevents disassembly and poor swivel rotation. (Launch date January 2027)
System Enhancements
Two M18 batteries provide 24 hours of cooling with 30 quarts of useable storage without packing ice. Jonathan Kozlowski - IRONMARKETS
Who doesn't want a hot lunch? This was designed to heat your meal to a set temperature so it's hot and ready when you need.Jonathan Kozlowski - IRONMARKETS
PPE
For those welding, one of the most requested products was a solution for the BOLT helmet system. The BOLT Passive Welding Hood is compatible with both BOLT Head Protection and the Milwaukee Welding Hood Suspension, the sliding adjustment allows you to achieve the Best Fit to Your Face with five fore-and-aft position adjustment options. (Launch date February 2027)
The BOLT Auto-Darkening Welding Hood delivers the Most Adaptable welding experience and Faster ADF Setup. Compatible with both BOLT Head Protection and the Milwaukee Welding Hood Suspension, the sliding adjustment allows you to achieve the Best Fit to Your Face with five fore-and-aft position adjustment options. (Launch date February 2027)
There’s more. We couldn’t list everything here. Categories with new products not mentioned above include Mechanical, Electrical, Plumbing, Carpentry, Outdoor, Jobsite Apparel, and continued choices for PACKOUT.
