Whiteman B46H90 Walk-behind Trowel Specs

October 24, 2012
Download
Recommended
The jobsite can be unpredictable, but with DEWALT®, you're ready.
Sponsored
The jobsite can be unpredictable, but with DEWALT®, you're ready.
Fame Rental Dash
Equipment Monitoring & Logistics
Fame Rental Dashboards Centralize Data for Smarter Equipment Rental Decisions
More in Power Trowels
Power Trowels
5 Things to Know About Power Trowel Blades
MARSHALLTOWN Company
From size, floating, and pans - here are a few things concrete contractors should keep in mind about their power trowel blades.
Adobe Stock 537774514
Sponsored Content
The jobsite can be unpredictable, but with DEWALT®, you're ready.
DEWALT
Being relentless, adaptable, and safe is not a choice–it’s the job. Our full range of concrete solutions are built for your demands.
The jobsite can be unpredictable, but with DEWALT®, you're ready.
Power Trowels
Allen Engineering Launches HDX615-DF Dual-Fuel Riding Trowel for Greater Efficiency and Flexibility
Allen Engineering Corporation
Allen Engineering’s new HDX615-DF riding trowel offers dual-fuel capability, hydraulic performance, and advanced features for improved concrete finishing efficiency.
Allen Eng Hdx615 Df
Power Trowels
Marshalltown Unveils White Lightning Power Trowel Blades
MARSHALLTOWN Company
The non-reinforced blades are compatible with walk-behind power trowel units ranging from 24 in. to 48 in.
Marshalltown
Power Trowels
Milwaukee Tool Launches MX FUEL Walk Behind Trowels
Milwaukee Tool Corp.
The MX FUEL Walk Behind Trowels provide a smooth, balanced finishing experience with 5 hp of performance.
The MX FUEL Walk Behind Trowels provide a smooth, balanced finishing experience with 5 hp of performance.
Concrete
Placing, Finishing, Sawing and Curing Total Concrete Slab Packages
Structural Services Inc.
The following is the second article in a two-part series that reviews current practices for installation of total concrete slab packages from base course to final finish.
Early entry sawing.
Concrete
Floor Flatness & Levelness in Modern Construction
ClearEdge3D
Performing floor quality assurance in house, rather than outsourcing, can reduce project wait times.
Flatter floors
Concrete Hand Tools
How to Finish Flatter Concrete Floors
KB Engineering LLC
Proper concrete finishing tools and techniques will help you increase your FF numbers so that placing very flat and super flat floors becomes routine
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Equipment & Products
How to Avoid the Delamination of Steel-troweled Floors
KB Engineering LLC
Understanding the failure mechanism and causes is the key to avoiding floor delaminations.
Surface delaminations are separations of the top surface from the underlying concrete.
Concrete Equipment & Products
Buying Used Concrete Equipment? Beware of Hidden Liens
Crest Capital
There's an uncommon-but-real issue that could crop up when buying any type of used equipment, and that’s buying equipment that unknowingly has a lien on it.
Reputable sellers, UCC searches, and ensuring all paperwork is accounted for are all good practices to follow.
Concrete Equipment & Products
Wide Bay Superflat VNA Concrete Floors
Structural Services Inc.
Ultimately, it's up to the facility owner to determine how their Defined Traffic or F-min concrete slabs will be constructed. If the owners don’t want corrective grinding in their defined traffic aisles, then the narrow strip construction method is best.
When it came time to measure the placements against the F-min specification and render a certification for compliance, a Floor Levelness and Flatness firm used the F-min Profiler to measure the exact wheel path of the intended material handling equipment. This allowed for instant results ensuring accurate measurements and layout of spot grinding in out-of-tolerance areas.
Power Trowels
Valtec Showcases OmniPoly Dynamic Flex Poly Trowel Blade
Valtec Group LLC
This product is for use on power trowels for controlling dark burnish marks on new concrete floor installations.
Pasted Graphic 8
Power Trowels
Milwaukee Tool MX FUEL 24-in. Walk-Behind Edging Trowel
Milwaukee Tool Corp.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Page 1 of 18
Next Page