CareLift ZB32032 Telescopic Reach Forklift
- Capacity of 32,000 lbs.
- Lift height of 32 ft.
- Includes a 173-hp Cummins QSB 5.9 engine, Dana T32,000 powershift transmission and AxelTech axles
- Features three modes of steering as well as frame leveling
- Numerous tool carrier attachments available
Genie GR-20 Runabout
- Stiffer mast structure with improved mast flaps
- New mechanical pothole system allows for 2-in. ground clearance
- Reduction of platform step-in height to 15 in.
- Zero inside turning radius
- Proportional drive capabilities
- New compact design (53" x 31.5"), hydraulic drive and mechanical steering systems provide better mobility in and out of tight areas and provide for easy passage through doorways and elevators
- Total of nine available platform options
Haulotte HA 100 JRT
- 105-ft. maximum working height with a platform height of 98 ft. 5 in.
- 69-ft. 11-in. maximum horizontal outreach
- 37-ft. 3-in. up and over clearance
- 551-lb. platform capacity
- Standard four-wheel drive and steer
- 15-in. ground clearance
- 45-percent gradeability
- Hydraulic differential lock
- Extendable axles
Wap Attix 19 Series from Alto
- Series of wet and dry vacuums
- 19-gal. canister, steel frame, stainless-steel canister, two-stage turbines and bypass motors as well as an exclusive tilting, removable container
- Tilt feature allows the operator to easily empty the canister without having to turn over the entire vacuum
- Removable container gives the operator one more emptying option
- Vacuum operates with an air flow of 140 cfm and a water lift of 105 inches, while producing only 57 dB(A)
Kaeser M14 Rotary Screw Compressor
- Portable rotary screw compressor
- Sigma Profile airend
- 18-hp industrial gasoline engine
- Produces 50 scfm at 100 psig
- Lightweight wheel-mounted package with hinged handle bar
- Vibration isolator pads absorb shock and ensures quiet operation
Subaru Robin Silent Series Generators
- Models include R1700i at 1,650 watts, RG3200iS at 3,200 watts and RG4300iS at 4,300 watts
- Engines run at slower speed for low power use and automatically increases as more electrical power is required
- Advanced reverse cooling design allows units to be fully enclosed in a sound-absorbing poly-resin enclosure
- Subaru Robin gasoline engines
Shindaiwa DGK45C Ultra Quiet Generator
- Has been upgraded to ultra-quiet status
- Noise levels of 53 dB(A) at idle and 56 dB(A) at full load
- Low fuel consumption
- Compact size
- Reduced weight
Garrett Metal Detectors Ace 250 and 150
- For locating lost, hidden or abandoned treasure and other metal objects
- Feature exclusive Graphic Target Analyzer (GTA) technology, sensitivity adjustments, continuous coin depth indicator and target ID legend
- The Ace 250 also offers accept/reject trash elimination, electronic pinpoint and continuous battery life indicator
- 6.5" x 9" PROformance submersible searchcoil with two optional coils including the 4.5-in. Sniper searchcoil and
9" x 12" PROformance searchcoil
American Compaction Diamond Compaction Wheels
- For use on backhoes, excavators, skid steers and compact excavators
- Over 30 models with sizes from 4 to 72 in.
- Each wheel equipped with cutting edge and choice of mounting plates
- "Triple" Seal Bearing with rock protectors
Case 400 Series Skid Steers
- Five radial-lift and three vertical-lift models with maximum rated loads from 1,500 to 3,000 lbs.
- 49- to 82-net-hp Tier II-certified engines
- Extra-heavy-duty design
- New cooling system provides balanced cooling to the engine and hydraulics
- Low-effort servo-hydrostatic controls
- Factory-ready cab with optional air conditioning available for Models 430 and above
- Over 75 attachments available
Bandit 3400 Stump Grinder
- For removing stumps in land- and lot-clearing projects, under power lines and beneath right-of-ways
- Equipped with 140 hp and a unique hydrostatic cutter wheel drive with hydraulic, planetary motor built into the cutter head, which eliminates the need for a belt, jackshaft or transfer case type drive
- 305 Cat rubber-tracked undercarriage allows machine to go almost anywhere and work in soft or uneven ground conditions
- Radio remote controls all functions from any position
Bobcat Boring Attachment
- Allows Bobcat mini track loaders and 463 skid-steer loaders to install utilities under driveways, sidewalks and other obstructions
- Installs electrical, telephone, cable and flexible water pipe up to 2 in. in diameter with minimal disturbance
- Low-speed, high-torque hydraulic motor drives a screw-type boring bit through the ground as machine is driven forward
- Backreams with reaming bit
- Various-sized boring tools available including carbide bits
E-Z Trench Bedscaper BE310-A
- Landscaping trencher
- 6.5-hp Honda GX engine with a centrifugal clutch
- Handle-mounted controls for the throttle
- Adjustable cutting depth and handle height
Allmand TLB-6235
- Full-time mechanical four-wheel-drive system and a servo-controlled hydrostatic transmission
- 35-hp Isuzu liquid-cooled diesel engine
- ESL (Extended Service Life) backhoe with up to a 9-ft. 10-in. digging depth and a 6,000-lb. bucket digging force
- 2/3-cu.-yd. loader bucket
- Load-sensing hydraulic steering system
Kubota E-Series Engine
- E-TVCS (three vortex combustion system) technology
- Offers reduced soot, unburned HC and CO emissions
- Produces less NOx than traditional direct-injection systems
Gehl CT-Series Telescopic Handlers
- CT5-16, CT5-16 Turbo, CT6-18 Low Profile, CT6-18 Turbo and CT7-23 Turbo feature maximum capacities from 5,000 to 7,000 lbs.
- Maximum lift heights from 16 ft. 2 in. to 22 ft. 7 in.
- Rated capacities from 5,000 to 6,000 lbs.
- 58- to 101-hp turbocharged and naturally aspirated Tier II diesel engines
- Pilot-controlled hydraulic system
- Hydraulic quick-attach system and standard auxiliary hydraulics
Ingersoll Rand Power Buggy
- 16.5-cu.-ft. power buggy can be used for concrete spreading, demolition debris removal, spot pouring and more
- Available with either a steel or poly-type tank
- 6 in. of bucket clearance in fully dumped position
- 13-hp Honda engine
- Electric or recoil start
- Optional foam-filled tires to increase stability
New Holland C185 Compact Track Loader
- 2,400-lb. rated operating capacity
- Super Boom vertical lift linkage
- Two-speed transmission delivers travel speeds up to 8 mph
- Optional hydraulic mount plate allows operator to securely attach or remove buckets and attachments without leaving the seat
- Enhanced visibility with no rear frame towers to block operator's view
Morbark Stump Grinders
- Top speed of 3.2 mph for getting to the stump faster
- Unique cutter wheel and tooth design enables them to grind stumps more quickly
- Patent-pending boom design creates a 52-in. cutting arc
- Hexagon-shaped cutter wheel
- Six multi-tipped cutting tools fastened with one bolt each provide the grinding performance of 24 teeth
- Up to 8 cu. ft. of chip retention space allows for more continuous grinding and less repositioning
Niftylift Traction Drive System
- Available on its range of trailer-mounted boom lift platforms
- Allows operator to unhitch, maneuver and position even a large trailer mount quickly and safely
- Controlled via joystick positioned next to the towing eye
- Hydraulic motors transmit drive directly to the wheels
Kubota U-Series ZTS Excavators
- 1.5-ton U15, 2.5-ton U25 and 4.5-ton U45 zero tailswing excavators are designed for work in tight spaces
- No rear overhang beyond the width of the tracks
- U15 has a variable track width and comes with a quick-coupler bucket set with 3,417 lbs. of breakout force
- U25 has 5,765 lbs. of breakout force and an overall width of 4 ft. 11 in.
- U45 delivers 9,685 lbs. of breakout force and features an angle blade with floating positioning, as well as an auto idle system
Towmaster Contrail C-14 Drop-Deck Trailer
- 13,600-lb. capacity
- Oak wood deck
- 7,000-lb. Dexter Torflex axles
- Spring-assist ramps
- Auto-Latch ramp hold-ups
Partner K 750 Power Cutter
- Dual Charge engine technology delivers 5 hp while producing 70 percent fewer emissions and providing greater fuel economy
- Vibration dampening system offers 50 percent lower vibrations and smoother cutting
- 25 percent lower noise level due to a larger muffler
- Additional features include Active Air Filtration, SmartCarb carburetor, automatic decompression valve and DuraStarter dust-sealed starter
Stone Champion Mixers
- 12 different Champion concrete mixers in sizes from 2 to 12 cu. ft.
- Available in standard side and end-dump versions
- Engine options include Briggs & Stratton, Honda and Robin
- 9-cu.-ft. size available with a polyethylene drum option
- Lifetime warranty on drum bearings and seals and a two-year drum warranty
Terex HR1.5, HR1.6 and HR2.0 Compact Excavators
- Operating weights from 3,395 to 4,300 lbs.
- Breakout forces from 3,420 to 3,535 lbs.
- 18-hp, three-cylinder Mitsubishi diesel engine
- Improved dampening for a quiet ride
- Right-hand side, ABS-molded console contains throttle, starter switch and electric toggle switches
Target G2 Tile Saws from Electrolux
- Tilematic G2 cuts 16 in. diagonally, while the Super Tilematic G2 cuts 22 in. diagonally
- Tilematic G2 rip cuts a 24-in. tile; Super Tilematic G2 rip cuts a 31-in. tile
- 1 1/2-hp Baldor continuous-duty motor is totally enclosed and fan cooled
Lay-Mor Model 2A Walk-Behind Sweeper
- 40-in. directional broom
- 5 1/2-hp Honda or 5-hp Briggs & Stratton
- Dual drive wheel
- Adjustable broom angle at handlebar
- Sprinkler system available
Gensco Robend Rebar Bender
- Capacity to #5 (5/8-in.) rebar
- 115-volt single-phase
- Automatic angle setting with auto stop
- Maximum bending to 180 degrees
- Supplied with three bending formers and available with formers for pipe
- Weighs approximately 28 lbs.
Ground Heaters Arctic Bear HD
- Indirect-fired heater designed to deliver clean, dry heat while tolerating the most extreme cold-weather conditions
- Can withstand ambient temperatures down to -60 degrees F and winds up to 70 mph
- 100-percent stainless-steel firebox and heat exchanger
- All hoses and wiring are arctic grade
- Powered by a CSA-certified, 10KVA, 240-volt AC, three-phase generator which is driven by a Kubota 1,800-rpm diesel engine
- Offers heat output of 500,000 to 850,000 BTU/hr
Thieman Toplifter Series Liftgates
- 42- or 44-in. platform and is rated with a 1,500-lb. capacity
- Standard Nitrotec pins and Polylube bushings at all pivot points for reduced maintenance
- Standard 5,000-lb. tow rated bumper and dual cylinders
- Torsion Assist on all 42-in. deep steel platforms
- Options include: variety of platform materials, light kit, in-cab shut-off switch and remote pendant controls
McLaren Protrac
- Over-the-tire skid-steer tracks provide maximum traction and flotation in mud, sand and snow
- Heat-treated, hammer-forged pins and links
- Crafted with specially formulated steel, not cast iron
- ProTrac Diamond suitable for mud, clay, loose rock and sand
- ProTrac Magnum offers more pushing and pulling power in deep mud or for demolition and land clearing
- ProTrac Rubber allows for safe use on asphalt or grass
Astec RT160
- 24-hp Honda gasoline engine
- Trenches to 48-in. deep and from 4 to 8 in. wide
- Two independent hydraulic pumps control the ground drive and trencher drive
- Hydraulic trencher drive system directly connected to the trencher head shaft
- Hydrostatic ground drive provides inching precision and infinitely variable speeds for working in different applications and conditions
- Electric start and single-joystick operation, as well as Astec's unique "automatic parking brake" operator presence system
Huskie Hydraulic Hammer Series II
- HH150-2 through HH1000-2 Series II breakers feature impact energies from 200 to 1,200 ft.-lbs.
- Redesigned operating piston, main valve and internal porting for increased power
- Slight increase in low-pressure nitrogen gas charge
- Wider input flow range for use on low- and high-output carriers
- Modular design with fewer than 40 total parts
- Multi-fit bracket for mounting on various prime movers
Vermeer RT350
- 37-hp ride-on trencher
- Backfill capabilities
- Trenching depth to 48 in.
- Patented creep override for better machine control
Trench Shoring Services Product Line
- Steel trench boxes from 2 to 12 ft.
- One-, three- and four-sided shoring, as well as cofferdams and manhole boxes
- Light-duty aluminum shoring and medium-duty aluminum trench boxes
- Manhole casings and frames
- End closure and doghouse panels, H-beams, bore pits, bedding and rock boxes and other products available
Construction Attachments Multipurpose Buckets
- Enable a tractor, skid steer or backhoe-loader to scrape, bottom dump, clamp, dig, doze, clam load, backfill and load material
- 54- to 72-in. widths with 6.7- to 9.1-cu.-ft. heaped capacities
- 19-in. maximum clam opening
- Pre-drilled front cutting edge to accept bolt-on reversible cutting edge or teeth
- Rear hitch designed to match carrier hitch dimensions
- Optional One-Touch hydraulic kit to actuate clam circuit on tractors without auxiliary hydraulics
Arrowhead Rockdrill S Breaker Range
- Reduced noise and vibration via vibration-silencing technology
- Compressed urethane mounting section eliminates use of cross bolts for reduced wear and maintenance
- Ratio of power to speed provides sufficient power for large jobs
BLS Poly Bolt-On Track Pads
- Allows easier installation and removal of track pads from grousers
- Enables reuse of predrilled steel triple grouser by replacing only the polyurethane bolt-on track pad
- Available for asphalt pavers from Ingersoll Rand, LeeBoy and Mauldin
- Available for milling machines from Bitelli, Caterpillar, CMI, Dynapac, Ingersoll Rand, Marini, Roadtec and Wirtgen
- Available for concrete slipform pavers from Gomaco, Miller Formless and Power Curbers