Shindaiwa EB8510 Backpack Blower
- 4.5-hp overhead cam engine
- Weighs 24.5 lbs. without tubes
- Wind velocities up to 224 mph; maximum airflow is 762 cfm
- C4 engine meets all clean air standards
- 76.7dB(A) in normal operation; 65dB(A) in Hush Mode
Stihl Backpack Blowers
- BR 500 and BR 550 models
- 65 dBA sound rating
- Patented 4-Mix engine
- Single-handed operation
- Easy-grip throttle controls with off switch and cruise control
Billy Goat AE400H Rental Aerator
- 4-hp Honda GX engine
- Proprietary water tank is desgined to fill and drain easily and holds up to 50 lbs. of water
- Optimum weight placement makes lifting the tine assembly out of the ground easy and yields the greatest tine penetration
SourceOne Plugr Turf Aerators
- Five sizes of walk-behind aerators
- 22- to 30-in. aeration widths
- Tow Pro attachment with 45-in. aeration area
- Reciprocating aerators with tines power driven deep into the ground by crankshaft and engine to create deeper, cleaner holes
- Plugrs use no add-on weights
- Lightweight and maneuverable
Mantis E-System
- Collection of electric-powered landscaping tools for professional and residential use, including a pruner, edger, line trimmer and hedge trimmer
- Tools use E-System Power Head featuring a 850W double-insulated motor that offers a max speed of 8,000 rpm and a shaft length of 36 in.
Robin FL500 Backpack Blower
- 48.6cc, 2-hp engine
- Diaphragm carburetor
- 19 lbs. with pipe
- 32-oz. fuel tank
Bluebird 742 Aerator
- 25.5-in. aerating width
- 4-hp Honda engine with synchronized clutching system
- Patented free-wheeling outer tine system provides increased maneuverability and minimal turf damage around corners and in tight areas
- Removable side weights offer optimal soil penetration and balance for easier slope aeration
Classen SA-25 Stand-Aer
- 24-in.operational turning radius
- Hydrostatically tine and tire driven aerator
- Operational and transport speed up to 4.7 mph, which translates into 50,000-plus sq. ft. per hour
- Tines hydraulically raise and lower up to a 3-in. depth with a hole pattern of 4.06 x 7 inches
- 13-hp Honda OHV engine
- Fits through a 36-in. gate
Honda FRC800 Tiller
- Rear-tine tiller
- Overall weight of 275 lbs.
- 8-hp GX Series engine
- Clutch disengagement lever
- Four-position handle adjustment
- 219-rpm tine speed
- 20-in. tilling width
- 12-in. tines for deep tilling
Ryan JR. Sod Cutters
- 12- or 18-in. cutting widths
- Self-propelled with knob-tread drive wheels
- 135 ft. per minute speed
- 5.5- or 6-hp Briggs & Stratton engines
- Optional trenching and mole blade attachments
Mackissic Mighty Mac Blowers
- 9-in. pneumatic front swivel/locking tire and 12-in. rear pneumatics
- Quiet, balanced, high-speed poly impeller with up
- Loop adjustable handle assembly with cushioned antivibe grip
- Kickable discharge to divert air up, down, forward, or sideways
to 200 mph and 2,000 cfm
Echo PB-460LN Blower
- Average air volume of 800 cfm at housing; 380 at end of pipe
- Maximum air speed of 175 mph at end of pipe
- Unit weighs 26.4 lbs.
- 65 dBA
- 64-oz., see-through fuel tank
Companies in this article
