Concrete Contractor's 2022 Top Products

Award winners of Concrete Contractor magazine's 2022 Top Products - helping concrete contractors work smarter ... not harder.

Concrete Contractor 2022 Top Products
AC Business Media

The Concrete Contractor 2022 Top Products award recognizes the attention the products, tools, and equipment captured from readers of the Concrete Contractor magazine as well as the construction professionals on ForConstructionPros.com.

The modern concrete industry pushes contractors to work smarter, more productive, and be as efficient as possible. These solutions were designed to not only help overcome the challenges contractors face on a daily basis but do so with innovative ideas and the ingenuity for them to be successful in the years to come.

Presented in alphabetical order, by company/manufacturer. Click the following to jump to the section: D-G, H-L, M, O-S, T-Z.

A-C

The Super Pro 446 Walk-Behind Trowel

By Allen Engineering Corp.The Pro446 Walk-Behind TrowelThe Super Pro 446 Walk-Behind TrowelAllen Engineering Corporation

The Super Pro 446 (previously known as the PRO446X) Walk-Behind Trowel comes equipped with a variable torque converter clutch allowing for low-speed torque and high-speed finishing. With an efficient helical gearbox, this heavy-duty, high-speed walk-behind can tackle the most demanding of projects. The SP446 is also equipped with a plow handle design for the operator’s ease when pitching the blades to an all-new height of 28-30 degrees. 

  • A 13 hp Honda GX390 gasoline engine
  • 46-in. rotor diameter
  • Rotor speeds up to 225 rpm for greater job site efficiency
  • Easy to use plow handle design when pitching the blades
  • Lifting point for easier transfer 
  • Efficient helical gearbox
  • Heavy-duty frame

The GWS13-52TG Tuckpointing Grinder & Dust Guard

By Bosch Power Tools & AccessoriesThe GWS13-52TG Tuckpointing Grinder and Dust GuardThe GWS13-52TG Tuckpointing Grinder and Dust GuardBosch Power Tools & Accessories

Bosch Power Tools' 5-in. high-powered, high torque dedicated tuckpointing grinder and dust guard, model GWS13-52TG, is designed to replace the 1775E.

This high-torque grinder with a dust guard is designed specifically for tuckpointing. It significantly boosts the power over the previous model from an 8.5-amp motor to a 13-amp motor, producing 9,300 RPM.

The GWS13-52TG is engineered for high performance and improved durability with a metal guard mounting flange collar, dust protection with directed airflow, and an enclosed spring-loaded guard for maximum dust capture. The new model is ideal for tuckpointers for the removal of brick mortar.

  • Motor is protected from dust and debris with epoxy-coated field windings and four-stage dust seals protect the gears and help ensure longer tool life
  • Constant electronic monitoring provides level operation and reliable speed under load
  • A viewing window on the dust guard makes it easy to see the cutting line
  • 1-3/8 inch dust port is designed to accommodate Bosch vacuum hose nozzles, but adapters (sold separately) are available to fit other vacuum hose nozzles
  • Works with Bosch PRO+GUARD Dust Solutions, an end-to-end dust-collection system that helps users move toward OSHA silica dust compliance
  • The tool-free guard adjustment allows full access to the diamond blade for quick and easy blade changes
  • The specially designed, spring-loaded guard maximizes dust capture during mortar or concrete cutting applications, even during plunge cuts

The BossTek DustBoss Atom Mobile Dust Suppression System

By BosstekThe DustBoss Atom Mobile Dust Suppression SystemThe DustBoss Atom Mobile Dust Suppression SystemBossTek

The DustBoss Atom from BossTek is a fan-less, self-contained design that incorporates remote control and 4G LTE telematics technologies as standard equipment to deliver an unprecedented combination of suppression and monitoring.  The compact, diesel-powered unit fits in the back of a pickup truck, so it can be quickly positioned and relocated to address dust-generating activity directly at the source. It also has forklift pockets on the front and back. 

With a throw of 100 feet (30 meters), the adjustable elevation angle and user-defined oscillation allow precise aiming of a powerful dust-capturing mist, which is comprised of millions of droplets per minute in the range of 50-200 microns.

  • Small and maneuverable
  • Suited to demolotion projects, recycling operations, transfer stations, bulk material processing, ports/shipping applications, quarrying/crushing, biomass handling, concrete curing and even indoor operations
  • Hand-held remote controlled
  • Web-based telematics help contractors monitor equipment status and streamline service and support by tracking engine hours, operating temperature, average run time per day and provides readouts of suggested maintenance - operators can remotely disasble machines if necessary
  • Programmable to monitor machine location via GPS or set up a ‘geo-fence’ so limit function within specified location

The Brokk Connect 2.0 Online Robotic Fleet Management Platform

Brokk Connect 2.0Brokk Connect 2.0BrokkBy Brokk

Brokk Connect 2.0, the next evolution in the online platform for connected Brokk robots, was released in 2021. It was developed to help owners remotely manage their machines by providing access to real-time information about the location of the robot, the status, operational data, and service needs. It also lets owners leverage the data to manage fleet utilization and optimize project planning. One of the key benefits is providing access to real-time information about the location of the robot, the status, operational data and any need for attention. The solution also lets owners leverage the data to manage fleet utilization and optimize project planning. Finally, combined with a Brokk Uptime service contract, Brokk will monitor the machines’ status, as well as troubleshoot any issues remotely and proactively. Machine uptime is maximized, and the robot is always ready for the next job.

  • "Sophisticated always-on" geofencing functionality keeps control of your fleet of machines and assists in case of theft or unauthorized use
  • Customize the online platform based on personal preference
  • Receive weekly status reports

The CorrVerter MCI Rust Primer - Rebar Corrosion Protection

By Cortec CorporationRebar Corrosion Protection - CorrVerter MCI Rust PrimerRebar Corrosion Protection - CorrVerter MCI Rust PrimerCortec Corporation

When it comes to tackling reinforcement surface prep and ongoing protection, CorrVerter MCI Rust Primer stands out with clear performance and application advantages to mitigate rebar corrosion.

Without the need for abrasive, water blasting, and intensive labor, CorrVerter MCI, which is recommended for application to rusty or poorly prepared steel surfaces where further corrosion protection is required and good surface preparation is difficult to achieve. CorrVerter MCI is a unique formulation of chelating agents combined with a high solids waterborne latex with extremely low water vapor permeability. This fast-drying, single-component primer converts surface rust into a hydrophobic passive layer and offers excellent protection against re-rusting of metal surfaces. Reinforcement coated with CorrVerter MCI Rust Primer has similar bond strength to concrete compared with uncoated rebar.

Custom Drum Designs for Unique Curb & Gutter Shape Requirements

Concrete Curb Custom Drum DesignsConcrete Curb Custom Drum DesignsCurb Roller ManufacturingBy Curb Roller Manufacturing

Curb Roller’s shaped concrete roller screeds make challenging concrete pours achievable with specially designed custom drums. Curb Roller’s custom drum solutions can be applied to applications as wide as 26 ft. and as deep as 4 ft. and can be created in a variety of shapes to meet job specifications. The custom rollers are ideally suited for unique shape requirements or large pours on jobs like drainage systems or spillways and have been used on projects by concrete and DOT crews across the globe. 

  • Ideally suited for unique shape requirements or large pours on jobs like drainage systems, spillways, street work, medians and v-gutters, flume, and other specialty applications
  • Designed to exact specifications, working with the project engineers to make sure the drum meets all project requirements
  • Built to spec
  • Reduce labor requirements and time on projects
  • Reduces the need for additional forming
Return to the top of the list.

D-G

The POWERSTACK 20V Max Compact Battery

By DEWALTThe DeWalt POWERSTACK 20V MAX Compact BatteryThe DeWalt POWERSTACK 20V MAX Compact BatteryDEWALT Industrial Tool Co.

The DEWALT POWERSTACK 20V MAX Compact Battery is a next-generation technological breakthrough that marks a new era of performance for DEWALT cordless power tools. Featuring pouch cell batteries designed for the construction industry, the DEWALT's POWERSTACK battery delivers one of the lightest and most powerful compact batteries from DEWALT.

  • 50% more power enabling broad application capabilities and fast performance
  • 25% more compact and 15% lighter, designed to provide tool maneuverability, high precision, and reduced fatigue when used in tight workspaces
  • Twice the lifespan - providing more overall investment value

The Diablo 24-Tooth Tracking Point Saw Blade 

By DiabloDiablo 24-Tooth Tracking Point Saw BladeDiablo 24-Tooth Tracking Point Saw BladeDiablo

The Diablo 6-1/2-in. 24-Tooth Tracking Point saw blade produces accurate, smooth cuts on framing materials without bogging down cordless power tools. With the introduction of Tracking Point, a “rudder” like tooth design that reduces vibration and tension, users can produce true, straight cuts. In addition, Diablo says the saw blade delivers up to 65% more cuts per charge in cordless saws.

Optimized for corded and cordless saws, the blade features Perma-SHIELD nonstick coating and a super-thin kerf, which minimizes material removal and produces a fast, clean cut. While the thinner blade is lightweight, the custom formulated carbide, sharp cutting edges, and the Tracking Point tooth design classify this blade as a heavyweight when it comes to durability. This 24-tooth framing blade is ideal for framers, roofers, remodelers, concrete formers or anyone who owns a saw that chews through nail-embedded wood. 

The Dural Aquatight 100 Plus Solvent-Free Epoxy Coating

By The Euclid Chemical CompanyEuclid Dural Aquatight 100 PlusEuclid Dural Aquatight 100 PlusThe Euclid Chemical Company

To combat water-related damage and ensure optimal concrete protection and repair, The Euclid Chemical Company adds Dural Aquatight 100 Plus to its line of epoxy-based products.

Concrete moisture mitigation systems are widely accepted as a critical part of the flooring system, used even when the moisture content of concrete or vapor transmission rate are not high at the time of flooring installation. Dural Aquatight 100 Plus is a solvent-free modified epoxy coating designed to seal concrete surfaces and reduce moisture vapor emissions prior to applying a finished flooring system.

The SmartMix Concrete Optimization & Performance Prediction Dashboard

By Giatec Scientific Inc.The SmartMix Concrete Optimization and Performance Prediction DashboardThe SmartMix Concrete Optimization and Performance Prediction DashboardGiatec Scientific Inc.

Giatec's SmartMix is a web-based dashboard that enables producers to optimize concrete mixes and predict their materials' performance. 

With the SmartMix dashboard, producers can adjust the proportions of their concrete mixes, such as the use of chemical admixtures and amount of cement, to achieve the lowest cost and carbon footprint. 

They can also use the system to analyze mix performance and predict performance variations as materials or conditions change. SmartMix does this by utilizing Roxi, the machine learning algorithm trained on the largest dataset ever collected on concrete performance.

With millions of datapoints used to train Roxi, the program's suggestions ensure that these adjustments will meet a mix's designed compressive strength and other performance criteria.

The GP3 Slipform Paver with Advanced Technology Features

By GOMACOGOMACO GP3 Slipform PaverThe GOMACO GP3 Slipform PaverGOMACO

The GP3 slipform paver has the capability of slipforming up to 30 ft. wide, is available as a two-track or four-track paver and now includes self-programming valves that work with the G+ control system and can automatically react and self-adjust to the dynamics of the machine.

  • Operator can make fine-tuned sensitivity adjustments from any display at any time, with paver elevation, steering, pivoting, travel control, anti-slip positive traction of tracks and more automatically corrected
  • Navigator display software brings all G+ paver accessories together for easy control and monitoring on an optional touchscreen display
  • Fully Wi-Fi capable to allow wireless control from multiple display screens anywhere on the paver
  • Wireless extension allows ground personnel to view and make fine-tuned adjustments to paver performance and configure settings for the GSI, side bar inserters, tie bar inserters and power transition adjuster using a tablet or phone
  • Vibrator monitoring system provides ability to monitor, control and diagnose each individual vibrator via the touchscreen display for instant, on-the-go response
  • Machine-to-Machine communication possible using the display and G+ control

Return to the top of the list.

H-L

The DD 250-CA Diamond Core Drill, Paired with Cut Assist Auto Feed

By HiltiThe DD 250-CA Diamond Core DrillThe DD 250-CA Diamond Core DrillHilti North America

Hilti North America's semi-autonomous core drilling solution, the DD 250-CA diamond core drill, paired with the Cut Assist Auto Feed unit gives the operator an assisted experience by intuitively guiding the drill through the entire drilling process. With this semi-autonomous drilling system, contractors can achieve significant productivity gains and convenience on jobsites.  

The DD 250-CA diamond core drill leverages integrated technology to provide the operator guidance for proper drill setup, real-time drilling feedback, and valuable productivity data once the drilling is complete. The smart tool has an unmatched range in its class for all applications including drilling penetrations for ducts, pipes, and cables and drilling blind holes for setting anchors or post-installed rebar.

The K1 PACE Cutter

By Husqvarna Construction ProductsThe K1 PACE Cut Off SawThe K1 PACE Cut Off SawHusqvarna

The first product to be launched on Husqvarna's battery system, PACE, the K1 PACE high-power battery cutter was designed to handle heavy-duty jobs. Husqvarna tells contractors to expect power and performance equivalent to gasoline-powered cutters, with the additional benefits battery powered equipment brings to both operators and the environment.

The PACE battery system can be utilized for more machines as the battery-powered family expands. In addition to the power cutters and battery system, diamond blades in 12 in. and 14 in./300 and 350 mm have been optimized for battery operation. The machine is also equipped with X-Halt brake function capable of stopping the rotation of a blade in a fraction of a second for enhanced safety.

The Pro-Plus Trench Drain System

By JosamThe Pro-Plus Trench Drain SystemThe Pro-Plus Trench Drain SystemJosam

Josam offers one of the most innovative trench drain systems for the drainage industry. The PRO-PLUS trench drain is an SMC/GRP material manufactured using glass-fiber reinforced polyester (GRP) pressed from sheet molding compound (SMC), which is a composite of polyester resin, mineral fillers, and glass-fiber mats. Its compressive, flexural, and tensile strength is unmatched, and its unique properties allow for less thermal expansion than polymer concrete, polypropylene, or high-density polyethylene.

The PRO-PLUS system can withstand extreme hot or cold weather conditions and high fluid temperatures preventing shape distortion before and after the concrete pour. This trench drain is 1.5 times stronger, 70% lighter in weight, and 1.7 times less thermal expansion than polymer concrete. It’s available with/without slope, with a variety of grating options such as the PRO-SNAP grate securing system with no bolts, and is suitable for load classes A-F.

The SCREEDSAVER MAX PLUS

By LigchineThe Ligchine SCREEDSAVER MAX PLUSThe Ligchine SCREEDSAVER MAX PLUSLigchine

The SCREEDSAVER MAX PLUS screed builds upon the SCREEDSAVER MAX machine, which was originally released in 2012 and has become one of the most popular mid-range screeds since that time. The SCREEDSAVER MAX PLUS adds new features such as a built-in diagnostic touchscreen, Topcon laser receivers, a totally revised wireless remote-control system, a quiet Honda gasoline engine, and the patent-pending SWINGBOOM frame.

“With the development of the MAX PLUS screed, we wanted to build upon the key strengths of the original SCREEDSAVER MAX, while enhancing the machine with many of the key innovations we have pioneered over the years,” says Pete Ligman, co-founder and head of Ligchine product development efforts.

  • SwingBoom enables up to 5 ft. 3 in. of side-to-side screed head movement with a pivoting boom member
  • 17-ft. boom extension with a 10-ft. high-performance screed head
  • Topcon LS-B110 2D laser leveling system standard or optional Topcon 3D mmGPS satellite control or LPS robotic 3D system
  • 24.9-hp Honda iGX800 gasoline engine
  • Features a two-wheel proportional hydraulic drive system and 90-degree manual pivoting undercarriage drive frame
  • Built-in diagnostic touchscreen
  • Operated via a revised wireless remote control system

Return to the top of the list.

M

The Diamond Devil Concrete Restoration & Polishing System

By The Malish Corporation USAThe Diamond Devil Concrete Restoration and Polishing SystemThe Diamond Devil Concrete Restoration and Polishing SystemThe Malish Corporation U.S.A.

The Diamond Devil Concrete Restoration and Polishing System, developed by The Malish Corporation, represents an advanced approach to concrete and terrazzo floor maintenance. Chemical-free and designed to work on most standard floor machines, the Diamond Devil system saves time and money while producing outstanding results.

The Diamond Devil system’s 3+1 polishing process uses a series of three tools, each with permanently precisely designed and angled blades, to achieve unparalleled results on concrete or terrazzo floors. The Diamond Devil system is so advanced that without chemicals and in just three steps.

The system’s “+1” shine tool is an optional step that elevates the floor’s polish to a shine, providing superior image gloss and clarity.  Using the Diamond Devil system’s 3 +1 polishing process, maintenance staff can grind, hone, polish, and shine more efficiently and effectively than ever before—saving time and money.

The MARSHALLTOWN Vibratory Plate Compactor

By MARSHALLTOWNThe MARSHALLTOWN Vibratory Plate CompactorThe MARSHALLTOWN Vibratory Plate CompactorMARSHALLTOWN Company

The MARSHALLTOWN Vibratory Plate Compactor was designed to be faster and compact better (up to 25% more centrifugal force) than other units. This results in more compaction force and faster traveling speed, helping contractors save valuable time over the course of a year. Its durable design was made to hold up in intense situations while still being affordable.

  • Frequency of 5,000 vpm
  • Travels at up to 110 fpm
  • 23.7-in. x 18.9-in. plate size
  • A folding handle that locks in place
  • Two lower handles for multiple lifting points
  • A throttle lever located on the handle
  • And a three-year warranty.

The Merlo DBM 3500 Cement Mixer

By Merlo (AMS)AMS-Merlo DBM 3500 Cement MixersAMS-Merlo DBM 3500 Cement MixersMerlo (AMS)

The DBM 3500 is a self-contained mini cement mixer. It has a drum volume of 1,321 gallons delivering 4.6 yd3 of concrete.

The self-loading bucket handles up to 25 cu/ft. of aggregate at each load cycle. The pump moves 66 gallons of water per minute into the mixing drum, suppling up to 37.7 sq. / ft. of concrete to be made in less than 15 minutes.

The drum ensures a high-quality mix, thanks to the high geometric volume of the drum, a reduced angle of inclination, and a double spiral propeller with variable pitch. The hydraulics on the self-loading bucket lifts and rotates the bucket as needed. The bucket door automatically opens to unload the aggregate into the drum. 

The M-6040 Slipform Paver

By Miller Formless Co.The M-6040 Slipform PaverThe M-6040 Slipform PaverMiller Formless

Designed to be one of the world’s most versatile and productive concrete slipform paving solutions, the M-6040 from Miller Formless has a dual-telescoping main frame, hydraulic variable-width paving mold, advanced machine control system, and other state-of-the-art features.

The M-6040 consistently produces smooth, high-quality concrete surfaces and maximizes cost-effectiveness and flexibility on projects of all scope and scale. It is the only paver capable of extending from 8 ft. 3 in. to 16 ft. 5 in. wide without frame or mold inserts; for larger jobs, bolt-on mold inserts can be used to expand the system to 20 ft. wide.

  • 9 ft. 4 in. (2.8 m) transport width
  • Can pave up to 15 3/4 in. (400 mm) deep
  • Accommodates hydraulic vibrators to ensure quality concrete placement
  • Weighs 55,000 lbs. (including mold, pan finisher and plow)

The MX FUEL Battery-Powered Backpack Concrete Vibrator

By Milwaukee Tool Corp.The Milwaukee Tool MX FUEL Backpack Concrete VibratorThe Milwaukee Tool MX FUEL Backpack Concrete VibratorMilwaukee Tool Corp.

For optimal concrete consolidationeven in the stiffest concrete applicationsthe MX FUEL Backpack Concrete Vibrator provides consistent starts and the most reliable pours, with the power to push up to 2 1/2-in. heads at over 11,000 VPM. It provides instant power, requires no regular maintenance, runs 50% quieter than its gas counterparts, and produces zero emissions for a safer workspace indoors or outdoors.

  • REDLINK PLUS Intelligence ensures optimal performance and provides overload protection
  • MX FUEL REDLITHIUM battery pack provides instant power with push-button start
  • Eliminates emission concerns and is safe to use both indoors and outdoors
  • Up to 50% less noise and reduced vibration for increased user comfort
  • Accepts shafts up to 21 ft. long and is compatible with Oztec shafts and heads
  • Weighs 34.5 lbs. with battery
  • Modular design allows users to easily remove the backpack harness when working on walls and columns
  • Can be tracked, managed and secured from a mobile device through the ONE-KEY Bluetooth community tracking network
  • Kit includes wireless remote for operation from up to 30 ft. away, MX FUEL charger and two MX FUEL REDLITHIUM XC406 batteries

The Minnich Control Speed Concrete Vibrator with Electric Flex Shaft

By Minnich Mfg. Inc.The Minnich Control Speed Concrete Vibrator with Electric Flex ShaftThe Minnich Control Speed Concrete Vibrator with Electric Flex ShaftMinnich Mfg. Inc.

The Control Speed Vibrator (CSV) from Minnich Manufacturing is a lightweight, durable, electric flex shaft concrete vibrator controlled through connectivity. Using Bluetooth and the Minnich app on an iOS or Android device, operators can choose between set speeds of 6,000, 8,000, 10,500, and open VPM. Choosing slower vibration speeds lessens material separation and reduces surface blemishes and repairs. Once a speed is chosen, the CSV will maintain that speed as the concrete load changes. The 15-amp (115-volt) universal motor drives a full line of Minnich shafts and heads and comes standard with a quick disconnect that adapts to the vibrators of many manufacturers. The CSV has been designed with a soft start that saves energy and mechanical wear on the motor and power system.

MudMixer Multi-use Mixer

By MudMixerMudMixerMudMixerMudMixer

MudMixer was built with durability in mind. Its heavy-duty, high-strength steel body surrounds a powerhouse of components supported by two large Marathon flat-free tires. All this comes together to create the only one-of-its-kind mud mixing machine.

MudMixer utilizes a two-phase infusion system. The auger and water, when introduced to the desired dry-mix, all work in harmony to deliver a flow of mixture that doesn’t stop until the job’s done. It works to decrease labor cost and increase the number of jobs completed all to save time, money, and energy. 

  • Integrated bag opener for easy drop-and-fold opening of dry mix
  • Fully-adjustable water dial allows for customized water flow for desired mixture
  • Electric drivetrain with the power to chew through more than 40 bags per hour
  • 35 in. stand-over height
  • Attached secondary hose for quick, easy, and convenient clean up
  • 330-degree pivot system allows for precision and adjustability on any work site
  • 14-gauge high-strength steel construction
  • An all-electric, water-sealed motor with both forward and reverse settings
  • Marathon Flat-Free tires

Return to the top of the list.

O-S

Oztec Electric Motors

By Oztec Industries Inc.Oztec Electric MotorsOztec Electric MotorsOztec

Oztec electric motors are manufactured to exacting specifications to withstand the rough day-to-day abuses associated with construction sites. Lightweight, compact and fitted with the company's comfortable adjustable shoulder strap, this one-man power unit will speed through the stiffest concrete.

All Oztec vibrators meet or exceed ACI specification # 309.

All Oztec power units come standard with the Quick Disconnect “QD” system. Changing shafts and heads on the job is a snap. Oztec units meet all United States OSHA and Canadian safety standards.

The Somero S-28EZ Laser Screed Machine

By Somero EnterprisesThe Somero S-28EZ Laser Screed MachineThe Somero S-28EZ Laser Screed MachineSomero Enterprises

The S-28EZ Laser Screed is packed with technologically advanced features that give you a competitive advantage.

Equipped with 360-degree machine rotation, a 25-ft. (7.62 m) telescopic boom, and your choice of pivoting screed heads, the S-28EZ continues the tradition of delivering high production rates with unsurpassed maneuverability. The customized OASIS laser control system is simple to operate and is upgradeable as technology advances. A redesigned, EZ Clean Head reduces clean-up time and improves long-term maintenance. New easy-access features improve ergonomics around the machine and operator efficiency.

Build the machine you need to meet your demands. Options include, but are not limited to a 12- or 14-ft. head width, roller plow, spray bar, and the Somero Floor Levelness System.

The FloorMate80E - A Fully Electric Mobile Mixer & Pump Combination

By Strong ManufacturingThe Fully Electric FloorMate80E Mobile Mixer and Pump CombinationThe Fully Electric FloorMate80E Mobile Mixer and Pump CombinationStrong Manufacturing

The FloorMate80E was designed with the contractors in mind. With continued emission restrictions, Strong Manufacturing took charge and changed the game. The first-ever, fully electric-zero emissions mobile batch plant is officially here. Powered by the partnership of Mitsubishi Motors, the FloorMate80E provides contractors the pumping capabilities of over 12 stories, 220V single-phase power, all while working indoors. 

  • Twin ribbon paddles with wiper blades
  • Twin, interconnected, horizontal drums
  • Empties without tilting
  • Mixer capacity: 5 ft3
  • Hopper capacity: 5 ft3
  • Adjustable output rate: 0-30 GPM 
  • Dimensions: 6 ft. 9 in. wide, 2 ft. 9 in. tall, 1,350 lbs.

SupraShine Maintenance Pads

By Superabrasive Inc. SupraShine Maintenance PadsSupraShine Maintenance PadsSuperabrasive

SupraShine, the new generation of maintenance pads by Superabrasive,  were designed to restore and upgrade any floor, delivering outstanding results and savings.

Four types of pads for all your floor care needs, from deep cleaning and restoration to daily maintenance: 

  • SupraShine Regular — A range of pads featuring a flexible material to deep clean, upgrade, and maintain all types of coated and uncoated, hard and resilient floors. Available in grits 400, 800, 1,800, 3,500, and 8,000.
  • High-Performance — Pads featuring a flexible material for daily maintenance of high traffic floors.  Available in grits 800, 1,800, and 3,500.
  • Heavy Duty — Featuring a tough material meant for surface preparation and to remove extreme dirt - a real problem solver in difficult cases where more cleaning power is needed. Available in grits 220 and 400.
  • Hybrids — A complete range of tools from 50 grit to 400 grit designed to restore surfaces - eliminate stains, scratches and orange peel, and achieve a smooth surface. 

Return to the top of the list.

T-Z

The Topcon Millimeter GPS with Robotic-based Solutions for Concrete Paving

By TopconTopcon Millimeter GPS with Robotic-based SolutionsTopcon Millimeter GPS with Robotic-based SolutionsTopcon Positioning Systems

System solutions are designed to support curb and gutter paving by maintaining productivity and accuracy, even when facing difficult GPS coverage issues. 

  • Millimeter GPS concrete paving solution can be used with the GT-1200 series robotic total station or LN-150 robotic layout navigator
  • Temporarily turns control of paver over to a robotic instrument to ensure production is maintained when GPS coverage is blocked
  • Both instruments offer support for a prism solution to quickly switch between Millimeter GPS and LPS (local positioning systems)
  • Use Topcon LongLink communication for robust connectivity
  • Self-leveling LN-150 provides an easy to use, cost-effective solution while the GT-1200 series instruments offer a standalone surveying total station

The RAIDER XL5 Mid-Sized Floor Grinder

By WerkMasterThe RAIDER XL5 Mid-Sized Floor GrinderThe RAIDER XL5 Mid-Sized Floor GrinderWerkMaster

The WerkMaster Raider XL5 was developed to be the most productive mid-sized concrete prep and polishing machine on the market. Productivity features include its ability to operate on either single or 3-phase power and capable of grinding to within 1/8 in. (3 mm) to the wall. Six counter-rotating heads make it very easy to use and eliminate worker fatigue.

Made in North America the Raider XL5 also comes with an industry-leading 3-year warranty.

The Raider XL5 is compact and easy to transport, but powerful enough for the commercial contractor.

The SP 94i Inset Slipform Paver with TeleMold

By Wirtgen GroupWirtgen Group SP 94i Inset Slipform Paver with TeleMoldWirtgen Group SP 94i Inset Slipform Paver with TeleMoldWirtgen Group

The SP 94i is a fully modular, 32-ft. class inset slipform paver can be used for in the construction of wide roads and highways, airport aprons, taxiways, and runways.

  • 4-track paver can be fitted with TeleMold which enables fast and flexible alteration of the working width by up to 3 feet on each side, resulting in an overall increase of 6 ft.
  • Short reconfiguration times mean that paving contractors can look forward to high machine availability and utilization rates
  • In addition to the quick-change elements of the mold, the TeleMold is also equipped with a quick-change system for the metering gate and vibrator mountings. This means that crews can pave and reconfigure the working width all on the same day
  • The system can be fitted to SP 64i, SP 94i, and SP 124i slipform pavers

Return to the top of the list.

Latest