HDX 600 Riding Trowel

Allen Engineering Corporation
Hdx600ridingtrowel 10089658

The double 4-ft.-diameter HDX 600 (Hydra-Drive Extreme) hydraulic-powered riding trowel is powered by a 44-hpKubota liquid-cooled turbo diesel engine coupled with all-hydraulic drive and steering.

  • Twin 46-in.-diameter, five-blade non-overlapping rotors operate at speeds up to 135 rpm
  • Electric-powered spray system is available for the application of retardant
  • A flip-up seat and removable screens provide access to the engine, clutch and drive-line
Fill out the form below to request more information about HDX 600 Riding Trowel
Latest in Power Trowels
Marshalltown
Marshalltown Unveils White Lightning Power Trowel Blades
January 20, 2025
The MX FUEL Walk Behind Trowels provide a smooth, balanced finishing experience with 5 hp of performance.
Milwaukee Tool Launches MX FUEL Walk Behind Trowels
September 20, 2024
Early entry sawing.
Placing, Finishing, Sawing and Curing Total Concrete Slab Packages
December 15, 2019
Flatter floors
Floor Flatness & Levelness in Modern Construction
August 5, 2020
Related Stories
The size of the project and quality specs generally dictate what type and how many trowels are required. For example, Ahal Contracting needed several of its Allen ride-on trowels to finish this 1.3-million-sq.-ft. floor for a new Dollar General Distribution Center in Marion, Ind. The contractor was able to exceed the FF50 flatness and FL35 levelness specs on the project.
Power Trowels
Match Trowels to the Slab
1179280918303 10298468
Power Trowels
Spotlight: Power Trowels May 2007
1167764149728 10299310
Power Trowels
Spotlight: Trowels January 2007
1130246035895 10304250
Power Trowels
Safe and Productive
More in Power Trowels
Power Trowels
Marshalltown Unveils White Lightning Power Trowel Blades
MARSHALLTOWN Company
The non-reinforced blades are compatible with walk-behind power trowel units ranging from 24 in. to 48 in.
Marshalltown
Power Trowels
Milwaukee Tool Launches MX FUEL Walk Behind Trowels
Milwaukee Tool Corp.
The MX FUEL Walk Behind Trowels provide a smooth, balanced finishing experience with 5 hp of performance.
The MX FUEL Walk Behind Trowels provide a smooth, balanced finishing experience with 5 hp of performance.
Concrete
Placing, Finishing, Sawing and Curing Total Concrete Slab Packages
Structural Services Inc.
The following is the second article in a two-part series that reviews current practices for installation of total concrete slab packages from base course to final finish.
Early entry sawing.
Concrete
Floor Flatness & Levelness in Modern Construction
ClearEdge3D
Performing floor quality assurance in house, rather than outsourcing, can reduce project wait times.
Flatter floors
Concrete Hand Tools
How to Finish Flatter Concrete Floors
KB Engineering LLC
Proper concrete finishing tools and techniques will help you increase your FF numbers so that placing very flat and super flat floors becomes routine
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Equipment & Products
How to Avoid the Delamination of Steel-troweled Floors
KB Engineering LLC
Understanding the failure mechanism and causes is the key to avoiding floor delaminations.
Surface delaminations are separations of the top surface from the underlying concrete.
Concrete Equipment & Products
Buying Used Concrete Equipment? Beware of Hidden Liens
Crest Capital
There's an uncommon-but-real issue that could crop up when buying any type of used equipment, and that’s buying equipment that unknowingly has a lien on it.
Reputable sellers, UCC searches, and ensuring all paperwork is accounted for are all good practices to follow.
Concrete Equipment & Products
Wide Bay Superflat VNA Concrete Floors
Structural Services Inc.
Ultimately, it's up to the facility owner to determine how their Defined Traffic or F-min concrete slabs will be constructed. If the owners don’t want corrective grinding in their defined traffic aisles, then the narrow strip construction method is best.
When it came time to measure the placements against the F-min specification and render a certification for compliance, a Floor Levelness and Flatness firm used the F-min Profiler to measure the exact wheel path of the intended material handling equipment. This allowed for instant results ensuring accurate measurements and layout of spot grinding in out-of-tolerance areas.
Power Trowels
Valtec Showcases OmniPoly Dynamic Flex Poly Trowel Blade
Valtec Group LLC
This product is for use on power trowels for controlling dark burnish marks on new concrete floor installations.
Pasted Graphic 8
Power Trowels
Milwaukee Tool MX FUEL 24-in. Walk-Behind Edging Trowel
Milwaukee Tool Corp.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Electric Tools & Accessories
Highlights of Milwaukee Tool PIPELINE 2023
Milwaukee Tool Corp.
The battery-powered tool and light equipment company Milwaukee Tool included 60+ new products for its annual #PIPELINE2023 event.
20230808 080748
Concrete Equipment & Products
Tests Show Troweling Aid Extends Concrete Finishing Time and Strengthens Slab
Lythic Solutions, Inc.
Research by MTSU's Concrete Industry Management Program could be the first step toward quantifying the effectiveness of troweling aids
Lythic and MTSU will hold public Day1 trowel aid tests as the 2013 World of Concrete and are looking for contractor volunteers.
Page 1 of 18
Next Page