Scan Combiflex 800

Three grinding heads spin in a counter-rotating configuration to grind a 32-in.-wide path

Scanmaskin USA
Fcp Scanmaskin 800 11073214

The Scan Combiflex 800 with 32-in. grinding path is designed for productive concrete grinding and polishing in large areas.

  • Three grinding heads spin in a counter-rotating configuration
  • Machine weighs 882 lbs.
  • 500-1,100 rpm
  • Scanmaskin vacuums and tooling also available
  • Motor power: 11kW / 7,5kW (15 hp)
  • Current: 32 Amp
  • Voltage: 3x400V, 3x230V, 7.5kW
  • Frequency: 50 / 60 Hz
  • Speed: 500-1400/min.
  • Grind discs: 3 x 9, 4 in.
  • Grinding width: 32 in.
  • Water velvet inlet: Standard
  • Water tank: Optimal feature

 

Fill out the form below to request more information about Scan Combiflex 800
Latest in Concrete Equipment & Products
The Next Generation of Concrete Protection
Sponsored Content
The Next Generation of Concrete Protection
October 1, 2025
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Optimize Concrete Slab Dowel Design
October 27, 2025
The Next Generation of Concrete Protection
Sponsored Content
The Next Generation of Concrete Protection
October 1, 2025
Fcp Racatac Chair 10893876[1]
MARSHALLTOWN Acquires RACATAC Products Inc.
October 23, 2025
Related Stories
Scan Combiflex 800 Propane Gla 11299000
Surface Prep
Scan Combiflex 800 Propane Grinder
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Hand Tools
How to Finish Flatter Concrete Floors
Field-cured test cylinders should be cured in the same manner as the concrete they represent. The temperature-time history of the test cylinders should match the in-place concrete curing conditions. In this case, the field-cured test cylinders overestimated the in-place concrete strength because they were sitting adjacent to a jobsite heater..
Concrete Equipment & Products
How to Estimate In-place Strength of Concrete
The Next Generation of Concrete Protection
Sponsored Content
The Next Generation of Concrete Protection
More in Concrete Equipment & Products
Concrete
Cortec MCI
MCI is is a technology from Cortec Corporation that protects reinforcing steel in concrete from corrosion.
Screenshot 2025 10 08 091352
Sponsored Content
The Next Generation of Concrete Protection
Crafco Inc. (PoreShield)
As the concrete industry moves toward sustainability, PoreShield by Crafco shows you don’t have to sacrifice performance for renewability and safety.
The Next Generation of Concrete Protection
Technology & Services
Why Prefabrication Matters to GCs
Wells
5 talking points on the use of prefabricated concrete.
Prefabricated building components accelerate construction timelines and increase safety on the jobsite.
Rebar Accessories & Equipment
Optimize Concrete Slab Dowel Design
How the Enhanced Integrated Dowel Model provides design recommendations for a complete set of inputs.
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Rebar Accessories & Equipment
Dowel Optimizer Reduces Construction Cost and Improves Sustainability
American Highway
Concrete contractors can find reduced construction costs and improved sustainability through EIDM Software's concrete slab dowel design tool.
American Highway Rebar Dowel Optimization Screenshot 2025 10 09 070606
Surface Prep
MARSHALLTOWN Acquires RACATAC Products Inc.
MARSHALLTOWN Company
Known for its floor creeper saving the knees of contractors, RACATAC has been acquired by MARSHALLTOWN.
Fcp Racatac Chair 10893876[1]
Concrete Equipment & Products
Cold-Weather Concreting: Technical Guidance for Preventing Winter Damage
The Euclid Chemical Company
Let's talk cold weather, concrete, and about what happens when the two meet.
Concrete contractors work efficiently in freezing conditions, following ACI cold weather concreting guidelines to ensure proper placement, finishing, and protection.
Concrete
Hydra Finish Improves Concrete Workability and Surface Durability
Surface Koatings
Hydra Finish, a silica-based finishing aid, helps reduce evaporation and shrinkage in fresh concrete, improving surface workability and finish consistency.
Hydra Finish
Concrete Materials
Certification for a Ternary Blended Cement
Ecocem
Ecocem's ACT I cement received ASTM C1157 certification. Plans to place a foundation in Southern California.
Man In Plant France
Concrete
MCI Solutions Can Help Protect Bridges from Chloride-Induced Corrosion
Cortec MCI
Bridge structures in coastal and cold-weather regions face ongoing corrosion threats from chlorides. MCI solutions can help extend service life through effective corrosion protection and maintenance.
Gojalia Adobe Stock 206676385
Technology & Services
Capture Real-time Aggregate Data to Optimize Mix Design
Giatec Scientific Inc.
Announced during ConcretWorks 2025, Giatec SmartMix is now integrated with alterBiota's digitalAggregate Analysis.
Max Saving Section V2
Concrete Equipment & Products
ProAll to Showcase P8525 Mixer at the 2025 Utility Expo
ProAll
ProAll, a Terex brand, will feature its P8525 mobile volumetric mixer at the 2025 Utility Expo in Louisville, highlighting on-demand concrete production technology designed for utility and infrastructure projects.
Pro All Mobile Mixer
Construction Safety Technology
5 Ways to Protect the Jobsite & Equipment Rental Lot
Wireless CCTV
A Q&A with WCCTV executive vice president Adam Haworth.
Adobe Stock 935033139
Page 1 of 487
Next Page