Barracuda

May 21, 2014

Husqvarna Construction Products

Husqvarna Barracuda Blade 11466124

Husqvarnaconstructionproducts 10073331

This blade is perfect for masonry, tile, stone and hard concrete. It is not recommended for abrasive materials like block and asphalt.

Fill out the form below to request more information about Barracuda

Finishers should edge along the edge form so contraction joints are easily visible for accurate sawcutting.

How to Hand-Trowel Edges and Joints to Match Power Trowel Finishes

Techniques for matching a power trowel's surface density and darkness by hand

Allu Concrete Screener And Crusher Buckets For 10 To 38 Ton Machines Screener Crusher

Recycle Concrete & Save Time, Money with the ALLU Screener & Crusher Buckets for 10 to 38 Ton Machines

How the ALLU Transformer Concrete Screener & Crusher Buckets for 10 to 38 Ton Machines can save time and money.

The walls and pillars are created layer by layer. In this method of construction, no formwork is needed. The formulation of Korodur’s CyBe MORTAR building material was matched precisely to the requirements of the 3D printing process.

3D Concrete Projects From Around the World

3D concrete can be used to create a wide range of projects - from buildings all the way to the tables in the backyard. These are a few examples that exemplify creative work.

The Smart Mix Concrete Optimization And Performance Prediction Dashboard Smart Mix Launch Pr

Optimize the Performance of Your Concrete Mix with the Web-based SmartMix App Dashboard

With Giatec's artificial intelligence algorithm, Roxi, concrete producers can use the SmartMix Dashboard to optimize concrete materials and predict the performance of their mixes.

PINOTH developed a special chassis while McNeilus developed a custom mixer body. The PRINOTH PANTHER T16 served as a starting point. This is a 33,500-lb. payload capacity tracked carrier vehicle that typically hauls digger derricks, aerial devices, cranes, drills, and more into the most challenging terrain.

Tracked Concrete Mixer Provides Off-road Access

PRINOTH and McNeiluis collaborate on mixer designed for the off-road construction market.

Floor Mate80 E

The FloorMate80E - A Fully Electric Mobile Mixer & Pump Combination

The Placer

The Placer Mobile Batch Plant & Gypsum Pump

By removing the necessity of on-site personnel to collect data, COMMAND Center AutoCollect can save teams the expense and labor hours of manually collecting data onsite.

The COMMAND Center AutoCollect - Autonomous Concrete Data Collection

Access concrete temperature history, calculate maturity, and strength data offsite

The Research in Concrete Sensor Technology

Pushing construction technology further to get real time data from concrete sensors, Purdue researchers have been working on a years-long project to investigate the value of integrating concrete sensors with the internet of things.

The goal of paver manufacturers is to use technology to enhance the performance of the equipment, make operators more productive and make the equipment operate more efficiently.

Equipment Operators Move to the Forefront in Asphalt and Concrete Paver Designs

Both concrete and asphalt pavers have evolved to provide greater controllability and operator comfort.

The Kpr 11 5 Collapsible Pan Power Trowel Attachment

Kipper Crete's KPR 11.5 Collapsible Pan Attachment

Corrverter Mci Rust Primer Rebar Corrosion Vp Ci On Rebar

CorrVerter MCI Rust Primer

Professor Luna Lu of Purdue University and Editor Jonathan Kozlowski discuss the on-going research into real-time concrete strength sensors.

Purdue’s Concrete Sensor Research

Professor Luna Lu discusses with Concrete Contractor editor Jonathan Kozlowski on the recent research being done in iOT sensors and concrete strength sensor technology.

Conc0121 Spec Guides Image

16 Grinders for Your Large & Small Projects

Specifications and technical data to help you choose your next grinder.

The Impact Of Concrete Admixtures On Sustainability Adobe Stock 265060449

The Impact of Admixtures on Sustainability

Two examples that illustrate how admixtures can be used to reduce the CO2 footprint of concrete.

The compact, diesel-powered DustBoss Atom can fit in the back of your pickup truck and features forklift pockets on the front and back.

The DustBoss Atom Mobile Dust Suppression System

Water Add Meter Wam350

Water Add Meter (WAM) - Real-time Calculation of W/C Ratio

The Water Add Meter measures the amount of water added before and during the pour to help validate concrete quality. Capture accurate, real-time recordations throughout the delivery cycle.

Mechanical impedance can be calculated by dividing the maximum force, when a hammer collides concrete surface, with initial velocity of the hammer rebound.

A Study on Estimating Concrete Compressive Strength by Mechanical Impedance

An in-depth analysis of the theoretical background of reactive mechanical impedance measurement and results of laboratory and field tests on compressive strength estimation of concrete.

Adobe Stock 298927303

Vapor Intrusion Mitigation Part 1: Reimagining the Next Evolution

Scientists created a spray-applied barrier material to replace the SBR-based latex waterproofing Part one of the Vapor Intrusion Mitigation series.

Concreting in the winter should be beautiful that time of year, all that snow.

Cold Weather Concreting - Tips for Smaller Projects

The factors and considerations concrete contractors should be aware of for placing concrete in cold weather

Adobe Stock 298927303

Vapor Intrusion Mitigation Part 3: Safety

Researchers have found ways to upgrade existing vapor barrier technology, adding components such as nitrile and aluminum to create barriers with vastly improved chemical resistance. Part three of the Vapor Intrusion Mitigation series.

Adobe Stock 298927303

Vapor Intrusion Mitigation Part 2: An Easy & Fast Install

Cost savings, minimize mistakes, and reducing liability are three of the benefits of a nitrile-core asphalt latex for vapor mitigation. Part two of the Vapor Intrusion Mitigation series.

Above and below: Properly placed/supported reinforcement will result in properly located reinforcement in the slab. Consult manufacturers' literature for maximum chair and other support spacing and use a 12-inch minimum reinforcement spacing so workers can avoid walking on the reinforcement.

How To Reinforce Concrete Slab on Ground to Control Cracking

Steel reinforcing bars and welded wire reinforcement provide crack width control in nonstructural slabs-on-ground.

“Guide to the Code for Assessment, Repair, and Rehabilitation of Existing Concrete Structures' is published as a companion to ACI 562-19.

2021 Update to Concrete Assessment, Repair and Rehab Guide

The American Concrete Institute and International Concrete Repair Institute updated the “Guide to the Code for Assessment, Repair, and Rehabilitation of Existing Concrete Structures" providing information on how to properly use the ACI 562.