The E1100 hydronic surface heater features an on-board generator enabling contractors to use the E1100 off-grid. The E1100 can cure 2,200 sq. ft. of concrete in extreme cold weather temperatures in its standard configuration or up to 6,600 sq. ft. of concrete with accessories.
- 122,080 BTU/hour gross heater input operating at 87% efficiency
Digital temperature controller for fast adjustment of heat transfer fluid output temperature - output temp ranges from 100° F to 180° F - Operating weight: 3,265 lbs.
- Fuel tank capacity: 72 gal.
- Hose length: 1,100 ft.
- Generator: 3 kW net output
- Oversized Mecc-Alte generator head on diesel engine for easier starting in temps as low as -40° F
- Advanced sound-attenuated design
- Heavy gauge, powder coated sheet steel enclosure with removable cover for 80 dB(A) operation at 3.3 ft. and 60 dB(A) at 23 ft.
- On-board Load Management System prevent wet stacking
- 750 W load bank maintains a minimum of 25% load during low load operation
Brochure: Wacker E1100 Hydronic Surface Heater
Video: Wacker Neuson Surface Heaters for Thawing and Curing
Video: Using Ground Heaters and Pex Tubing to Cure Concrete
How Wacker Hydronic Heaters Help Cure Concrete in Cold Temperatures
Fill out the form below to request more information about E1100 Hydronic Surface Heater
