[PODCAST] Snorkel's Don Ahern Talks About Company's Approach to Success in Lift Equipment

Snorkel makes concerted effort to take a different approach compared to competitors.

March 13, 2020

Listen to this Digging Deeper podcast to hear Don Ahern talk about what is driving the upward momentum of the Snorkel boom and scissor lift lines.

2022 Contractors Top 50 New Products Award 63f589c68dad5

Nominations Now Open for the Equipment Today Contractors’ Top 50 New Products

The 2024 award will highlight the best new product introductions and enhancements in the construction industry. Submissions close May 24.

Jobs that can rack up 10,000 hours on a diesel machine might add 6,000 hours or 7,000 hours to a comparable electric machine.

Challenges & Benefits of Moving to Electric Equipment

As emission regulations tighten, construction equipment power sources will evolve, but adoption will be gradual.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Pump-free fluid exchange systems are cleaner, safer, faster and sometimes misunderstood. Bust three pump-free myths with Sage Oil Vac.

The Mix-N-Go mixer features a polyethylene drum designed for removal of dried concrete.

Multiquip Releases Battery-powered Mix-N-Go Concrete Mixer

The Mix-N-Go mixer features a polyethylene drum designed for removal of dried concrete.

With a minimal working radius of 3 m and an out-of-work position of 10 m, the crane can be adapted to construction site conditions.

Liebherr Showcases 195 HC-LH 6/12 Hydraulic Luffing Jib Crane

With a minimal working radius of 3m and an out-of-work position of 10m, the crane can be adapted to construction site conditions.

The NM 500-25 and NM 1000-25 are designed for small-scale applications with a lower need for nitrogen, while the NM 2000-25 and NM 3000-25 meet the demands of large, intensive projects.

Atlas Copco Offers Portable Nitrogen Membrane Generators

The NM 500-25 and NM 1000-25 are designed for small-scale applications with a lower need for nitrogen, while the NM 2000-25 and NM 3000-25 meet the demands of large, intensive projects.

This sealer was over applied. It should have been applied 1 to 2 mils thick, but was likely 20 to 30 mils thick.

'Thin to Win' With Decorative Concrete Sealers

Thin applications are the simple answer to many acrylic sealer problems contractors face on decorative concrete projects like stamped and stained concrete.

Abrasives where abrasive material is sprayed onto a nylon pad are used for maintenance and light restoration.

Abrasives 101

Learn how to choose the correct abrasives for grinding and polishing concrete.

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.

The electric-powered excavator can be charged rapidly using the PowerTree.

DEUTZ Highlights Eco-friendly Parts, Software

The company will showcase the TCD 3.9 engine in the sub-4 liter category along with an electric excavator, powered by DEUTZ Electric System, and the DEUTZ PowerTree mobile rapid charging system at INTERMAT.

Gerrit Marx.

CNH Names CEO

Gerrit Marx will succeed Scott Wine as of July 1.

Dsc00805 Edited

The Top 25 Pavement Maintenance & Reconstruction Products 2024

After a few years hiatus, the Top 25 Pavement Maintenance Products is back and will be better than ever!

The new feature is designed to help operators solve challenges, hone their skills, understand equipment control and refine manual dexterity while navigating through equipment malfunctions or distractions.

CM Labs Adds Dynamic Fault Injection to Intellia Instructor

The new feature is designed to help operators solve challenges, hone their skills, understand equipment control and refine manual dexterity while navigating through equipment malfunctions or distractions.

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.

The RTH 10.37 has a lifting height of 120 ft., 5 in. and a maximum lift capacity of 22,700 lbs. for handling heavy loads.

Magni Introduces RTH 10.37 Rotating Telehandler

The RTH 10.37 has a lifting height of 120 ft., 5 in. and a maximum lift capacity of 22,700 lbs. for handling heavy loads.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

The BOSSAIR 185G features the BOSS BCAN Digital Interface, which uses the J1939 electronic connection in vehicles to communicate between the vehicle and air compressor and power systems.

BOSS Industries BOSSAIR 185G Air Compressor Package

The BOSSAIR 185G features the BOSS BCAN Digital Interface, which uses the J1939 electronic connection in vehicles to communicate between the vehicle and air compressor and power systems.

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

OTR to Open Factory in Mexico

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

New SealMaster Santa Ana Storefront Distribution

SealMaster Continues Western Expansion

SealMaster acquires Martin Marietta Miramar sealcoat manufacturing plant.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

Volvo Ce Pioneers E Shuttle Service To Cut Transport Emissions 660d7bf383081

Volvo Construction Testing Out Excavator Delivery in France With E-shuttle

The e-shuttle service is designed to reduce emissions during the first transport leg of construction machines from the Volvo CE factory in France.

FIRSTGREEN Industries launches ROCKEAT electric skid steer loader, pioneering powerful, safe and zero-emissions solution for mining, construction and other hazardous industries.

New Electric Skid Steer Loader by First Green

ROCKEAT produces zero carbon emissions, minimum operating fluids and near-silent operation, and offers a low clearance, 360-degree camera and remote operability.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Pump-free fluid exchange systems are cleaner, safer, faster and sometimes misunderstood. Bust three pump-free myths with Sage Oil Vac.