HT-S4C power trowel

HoverTrowel, Inc.
Hts4cpowertrowel 10078776
HoverTrowel Inc. has introduced the HT-S4C, a new 4-cycle power trowel.
  • Designed for decorative concrete overlays
  • Quiet, low emissions 31cc Honda engine
  • Weighs 45 lbs.
  • Fingertip pitch and speed controls
  • Telescoping handle
Fill out the form below to request more information about HT-S4C power trowel
Latest in Power Trowels
INTRODUCING PRO TOOLING
Sponsored
INTRODUCING PRO TOOLING
September 1, 2024
Flatter floors
Floor Flatness & Levelness in Modern Construction
August 5, 2020
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
How to Finish Flatter Concrete Floors
May 18, 2012
Surface delaminations are separations of the top surface from the underlying concrete.
How to Avoid the Delamination of Steel-troweled Floors
March 14, 2017
Related Stories
HT Set Up Copy 54caad54b03ec
Concrete Equipment & Products
HoverTrowel Pneumatic Models
1187660807546 10297936
Decorative Concrete
Decorative Tools August 2007
1179280918303 10298468
Power Trowels
Spotlight: Power Trowels May 2007
INTRODUCING PRO TOOLING
Sponsor Content
INTRODUCING PRO TOOLING
More in Power Trowels
Concrete
Placing, Finishing, Sawing and Curing Total Concrete Slab Packages
Structural Services Inc.
The following is the second article in a two-part series that reviews current practices for installation of total concrete slab packages from base course to final finish.
Early entry sawing.
Premium Content
Stand the Test of Time | JLG®
JLG Industries
Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.
Stand the Test of Time | JLG®
Concrete
Floor Flatness & Levelness in Modern Construction
ClearEdge3D
Performing floor quality assurance in house, rather than outsourcing, can reduce project wait times.
Flatter floors
Concrete Hand Tools
How to Finish Flatter Concrete Floors
KB Engineering LLC
Proper concrete finishing tools and techniques will help you increase your FF numbers so that placing very flat and super flat floors becomes routine
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Equipment & Products
How to Avoid the Delamination of Steel-troweled Floors
KB Engineering LLC
Understanding the failure mechanism and causes is the key to avoiding floor delaminations.
Surface delaminations are separations of the top surface from the underlying concrete.
Concrete Equipment & Products
Buying Used Concrete Equipment? Beware of Hidden Liens
Crest Capital
There's an uncommon-but-real issue that could crop up when buying any type of used equipment, and that’s buying equipment that unknowingly has a lien on it.
Reputable sellers, UCC searches, and ensuring all paperwork is accounted for are all good practices to follow.
Concrete Equipment & Products
Wide Bay Superflat VNA Concrete Floors
Structural Services Inc.
Ultimately, it's up to the facility owner to determine how their Defined Traffic or F-min concrete slabs will be constructed. If the owners don’t want corrective grinding in their defined traffic aisles, then the narrow strip construction method is best.
When it came time to measure the placements against the F-min specification and render a certification for compliance, a Floor Levelness and Flatness firm used the F-min Profiler to measure the exact wheel path of the intended material handling equipment. This allowed for instant results ensuring accurate measurements and layout of spot grinding in out-of-tolerance areas.
Power Trowels
Valtec Showcases OmniPoly Dynamic Flex Poly Trowel Blade
Valtec Group LLC
This product is for use on power trowels for controlling dark burnish marks on new concrete floor installations.
Pasted Graphic 8
Power Trowels
Milwaukee Tool MX FUEL 24-in. Walk-Behind Edging Trowel
Milwaukee Tool Corp.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Featuring a maximum blade speed of up to 160 rpm, the handlebar height of the edging trowel can be adjusted based on the user's preferences and a lift hook on the base allows for transportation around the jobsite.
Electric Tools & Accessories
Highlights of Milwaukee Tool PIPELINE 2023
Milwaukee Tool Corp.
The battery-powered tool and light equipment company Milwaukee Tool included 60+ new products for its annual #PIPELINE2023 event.
20230808 080748
Concrete Equipment & Products
Tests Show Troweling Aid Extends Concrete Finishing Time and Strengthens Slab
Lythic Solutions, Inc.
Research by MTSU's Concrete Industry Management Program could be the first step toward quantifying the effectiveness of troweling aids
Lythic and MTSU will hold public Day1 trowel aid tests as the 2013 World of Concrete and are looking for contractor volunteers.
Power Trowels
MBW Offers New Power Pitch Trowel Handle
MBW Inc.
With contractor safety in mind, this product allows the operator to pitch the blades without taking hands off the handle.
With contractor safety in mind, this product allows the operator to pitch the blades without taking hands off the handle.
Power Trowels
Milwaukee Tool MX FUEL 36-in. Walk-Behind Trowel
Milwaukee Tool Corp.
Delivering 5-hp performance during use, the 36-in. power trowel has a maximum blade speed of up to 130 rpm.
The MX FUEL 36 in. Walk-Behind Trowel
Page 1 of 18
Next Page