PCS Milling Scarifier Cutters

Polished Concrete Solutions, part of the Aramsco family
Millingf31650zoom 10723253

Utilize the milling cutter for removing thick and soft materials such as: mastic, thermo-plastic, waterproofing membranes, cold plastic coatings, glues, etc.

  • Leaves the surface smooth and ready for preparation
  • Often used to remove bulk of material prior to a carbide tip cutter
Fill out the form below to request more information about PCS Milling Scarifier Cutters
Latest in Concrete Equipment & Products
Chryso
Chryso Launches Adfil Strux 3000 Series Synthetic Fibers for Concrete Reinforcement
November 2, 2025
Prefabricated building components accelerate construction timelines and increase safety on the jobsite.
Why Prefabrication Matters to GCs
October 29, 2025
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Optimize Concrete Slab Dowel Design
October 27, 2025
American Highway Rebar Dowel Optimization Screenshot 2025 10 09 070606
Dowel Optimizer Reduces Construction Cost and Improves Sustainability
October 27, 2025
Related Stories
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Hand Tools
How to Finish Flatter Concrete Floors
Think of a vapor retarder as though it were an imaginary 'bathtub' that should hold water if filled. Repair any tears and tape up areas around conduits and pipes.
Concrete Equipment & Products
How to Install Vapor Retarders
Steel plate dowels carry loads across a construction joint, maintain vertical alignment between adjacent slabs and allow concrete shrinkage both perpendicular and parallel to the joint.
Concrete Equipment & Products
Reduce Random Cracking with Plate Dowels
1165345492204 10299371
Concrete Mixers
How Jobsite Mixers Can Save Money by Making Concrete On Site
More in Concrete Equipment & Products
Repair & Rehabilitation Products
Chryso Launches Adfil Strux 3000 Series Synthetic Fibers for Concrete Reinforcement
Chryso
Chryso introduces the Adfil Strux 3000 Series, a new line of macro synthetic fibers designed to improve durability, sustainability and efficiency in concrete applications.
Chryso
Concrete
Cortec MCI
MCI is is a technology from Cortec Corporation that protects reinforcing steel in concrete from corrosion.
Screenshot 2025 10 08 091352
Technology & Services
Why Prefabrication Matters to GCs
Wells
5 talking points on the use of prefabricated concrete.
Prefabricated building components accelerate construction timelines and increase safety on the jobsite.
Rebar Accessories & Equipment
Optimize Concrete Slab Dowel Design
How the Enhanced Integrated Dowel Model provides design recommendations for a complete set of inputs.
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Rebar Accessories & Equipment
Dowel Optimizer Reduces Construction Cost and Improves Sustainability
American Highway
Concrete contractors can find reduced construction costs and improved sustainability through EIDM Software's concrete slab dowel design tool.
American Highway Rebar Dowel Optimization Screenshot 2025 10 09 070606
Surface Prep
MARSHALLTOWN Acquires RACATAC Products Inc.
MARSHALLTOWN Company
Known for its floor creeper saving the knees of contractors, RACATAC has been acquired by MARSHALLTOWN.
Fcp Racatac Chair 10893876[1]
Concrete Equipment & Products
Cold-Weather Concreting: Technical Guidance for Preventing Winter Damage
The Euclid Chemical Company
Let's talk cold weather, concrete, and about what happens when the two meet.
Concrete contractors work efficiently in freezing conditions, following ACI cold weather concreting guidelines to ensure proper placement, finishing, and protection.
Concrete
Hydra Finish Improves Concrete Workability and Surface Durability
Surface Koatings
Hydra Finish, a silica-based finishing aid, helps reduce evaporation and shrinkage in fresh concrete, improving surface workability and finish consistency.
Hydra Finish
Concrete Materials
Certification for a Ternary Blended Cement
Ecocem
Ecocem's ACT I cement received ASTM C1157 certification. Plans to place a foundation in Southern California.
Man In Plant France
Concrete
MCI Solutions Can Help Protect Bridges from Chloride-Induced Corrosion
Cortec MCI
Bridge structures in coastal and cold-weather regions face ongoing corrosion threats from chlorides. MCI solutions can help extend service life through effective corrosion protection and maintenance.
Gojalia Adobe Stock 206676385
Technology & Services
Capture Real-time Aggregate Data to Optimize Mix Design
Giatec Scientific Inc.
Announced during ConcretWorks 2025, Giatec SmartMix is now integrated with alterBiota's digitalAggregate Analysis.
Max Saving Section V2
Concrete Equipment & Products
ProAll to Showcase P8525 Mixer at the 2025 Utility Expo
ProAll
ProAll, a Terex brand, will feature its P8525 mobile volumetric mixer at the 2025 Utility Expo in Louisville, highlighting on-demand concrete production technology designed for utility and infrastructure projects.
Pro All Mobile Mixer
Page 1 of 487
Next Page