E-Zbar Combination Bar Clip and Spreader

The spreader holds the required spacing between reinforcing steel and vertical formwork.

E-Zbar
Cbcs Art Double Matt No Bar

The redesigned E-ZBar is now a universal combination bar clip and spreader for vertical applications. The purpose of the E-ZBar is to hold the required spacing between reinforcing steel and vertical formwork. 

  • Cut to length on the jobsite and assembled with the corresponding clips to match your job specifications.
  • Same components work for single and double matt walls, sizes #4 through #8 rebar. 
  • Core is made from 3/8-inch coil rod and is available in metal or plastic.



Fill out the form below to request more information about E-Zbar Combination Bar Clip and Spreader
Latest in Concrete Equipment & Products
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Optimize Concrete Slab Dowel Design
October 26, 2025
Fcp Racatac Chair 10893876[1]
MARSHALLTOWN Acquires RACATAC Products Inc.
October 23, 2025
Concrete contractors work efficiently in freezing conditions, following ACI cold weather concreting guidelines to ensure proper placement, finishing, and protection.
Cold-Weather Concreting: Technical Guidance for Preventing Winter Damage
October 22, 2025
Hydra Finish
Hydra Finish Improves Concrete Workability and Surface Durability
October 19, 2025
Related Stories
Restraightening will cut down high spots and fill low spots; it can increase FF numbers from about 30 to 50 percent.
Concrete Hand Tools
How to Finish Flatter Concrete Floors
Water content is the single most important factor affecting workability or the ease of mixing and placing concrete.
Concrete Equipment & Products
Water in Concrete
Field-cured test cylinders should be cured in the same manner as the concrete they represent. The temperature-time history of the test cylinders should match the in-place concrete curing conditions. In this case, the field-cured test cylinders overestimated the in-place concrete strength because they were sitting adjacent to a jobsite heater..
Concrete Equipment & Products
How to Estimate In-place Strength of Concrete
The Next Generation of Concrete Protection
Sponsored Content
The Next Generation of Concrete Protection
More in Concrete Equipment & Products
Rebar Accessories & Equipment
Optimize Concrete Slab Dowel Design
How the Enhanced Integrated Dowel Model provides design recommendations for a complete set of inputs.
The concrete placement of CenterPoint Logistics Center (Inwood, New York). Concrete contractor: Ruttura & Sons. General contractor: Aurora Contractors.
Sponsored Content
The Next Generation of Concrete Protection
Crafco Inc. (PoreShield)
As the concrete industry moves toward sustainability, PoreShield by Crafco shows you don’t have to sacrifice performance for renewability and safety.
The Next Generation of Concrete Protection
Surface Prep
MARSHALLTOWN Acquires RACATAC Products Inc.
MARSHALLTOWN Company
Known for its floor creeper saving the knees of contractors, RACATAC has been acquired by MARSHALLTOWN.
Fcp Racatac Chair 10893876[1]
Concrete Equipment & Products
Cold-Weather Concreting: Technical Guidance for Preventing Winter Damage
The Euclid Chemical Company
Let's talk cold weather, concrete, and about what happens when the two meet.
Concrete contractors work efficiently in freezing conditions, following ACI cold weather concreting guidelines to ensure proper placement, finishing, and protection.
Concrete
Hydra Finish Improves Concrete Workability and Surface Durability
Surface Koatings
Hydra Finish, a silica-based finishing aid, helps reduce evaporation and shrinkage in fresh concrete, improving surface workability and finish consistency.
Hydra Finish
Concrete Materials
Certification for a Ternary Blended Cement
Ecocem
Ecocem's ACT I cement received ASTM C1157 certification. Plans to place a foundation in Southern California.
Man In Plant France
Concrete
MCI Solutions Can Help Protect Bridges from Chloride-Induced Corrosion
Bridge structures in coastal and cold-weather regions face ongoing corrosion threats from chlorides. MCI solutions can help extend service life through effective corrosion protection and maintenance.
Gojalia Adobe Stock 206676385
Technology & Services
Capture Real-time Aggregate Data to Optimize Mix Design
Giatec Scientific Inc.
Announced during ConcretWorks 2025, Giatec SmartMix is now integrated with alterBiota's digitalAggregate Analysis.
Max Saving Section V2
Concrete Equipment & Products
ProAll to Showcase P8525 Mixer at the 2025 Utility Expo
ProAll
ProAll, a Terex brand, will feature its P8525 mobile volumetric mixer at the 2025 Utility Expo in Louisville, highlighting on-demand concrete production technology designed for utility and infrastructure projects.
Pro All Mobile Mixer
Construction Safety Technology
5 Ways to Protect the Jobsite & Equipment Rental Lot
Wireless CCTV
A Q&A with WCCTV executive vice president Adam Haworth.
Adobe Stock 935033139
Decorative Concrete
Chryso Featuring Decorative Finishes to Sustainable Reinforcement at ConcreteWorks 2025
Chryso
At ConcreteWorks 2025, Chryso will highlight a suite of high-performance products that are reshaping concrete production and supporting the industry’s evolution.
From ConcreteWorks 2024
Technology & Services
A Panel of Concrete Insiders: Tech Trends in the Concrete Industry to Watch
A panel from throughout the concrete industry bring attention to the breakthrough technologies reshaping concrete construction's innovative landscape.
Adobe Stock 365980373
Concrete Equipment & Products
Aquajet Launches Calculator 3.0 App for Hydrodemolition Planning
Aquajet
Aquajet has released Calculator 3.0, a mobile app that helps contractors plan Hydrodemolition projects with tools for pressure, flow, nozzle size, pump settings and more.
Aquajet Calculator 2
Page 1 of 487
Next Page