Mixers

June 19, 2007
Collomix USA
Stowcollomix 10084195
Collomix 10841352
  • Line of 10 mixing systems for products ranging from grout, concrete and mortar to paint, epoxy dyes and more
  • Six single- or dual-speed hand-held models in single- and dual-shaft configurations
  • Four hand-guided mixing stations with 2- to 3-cu.-ft. bucket capacities with a roller-mounted stand and a five-point base
  • Use forced-action mixing technology for effective mixing from bottom up, top down or parallel, depending on paddle model
Request More Information
Fill out the form below to request more information about Mixers
Related
1256223089241 10291657
Working Equipment Concrete October 2009
October 23, 2009
1242151909702 10292689
Concrete Mixer Spotlight May 2009
May 14, 2009
1224686074048 10294670
Spotlight: Mixing October 2008
October 16, 2008
1206561693741 10302819
Mixer Roundup
March 7, 2008
Latest
Modifier A / NA Latex Product
October 21, 2020
Hydronic heaters provide an even distribution of heat to the concrete. Here, a poly sheet covers a slab-on-grade. Hydronic heating tubes were placed on top of the poly and the entire system is being covered with insulated blankets.
How to Protect Concrete During Cold Weather Pours
Cold weather concreting requires contractors to maintain minimal concrete temperatures to ensure proper strength gain and cure.
December 4, 2013
White Cap Splits from HD Supply, Combines with Construction Supply Group
Combined the two create a $4 Billion distributor of concrete accessories and specialty construction products. The transaction will enhance capabilities to serve professional contractors with broader product and service offerings and expanded reach.
October 19, 2020
Roxi was the first AI program created for concrete testing, built for Giatec’s patented, award-winning SmartRock wireless concrete sensor.
Giatec's AI Software and SDTC Look to Reduce CO2 Pollution on Construction Sites
The SmartRock AI Assistant Roxi has been trained with the help of Sustainable Development Technology Canada (SDTC) funding to reduce cement usage on construction jobsites during concrete testing.
October 13, 2020
The Enerpac ZU5 is available in two models, the ZU5 and the ZU5708RB-P.
The Enerpac ZU5 Post Tensioning Pump
In a head to head jobsite test, the Enerpac ZU5 performed 30% faster than traditional hydraulic pumps. The ZU5 improves contractors’ ability to stay on schedule or move onto other jobs.
October 13, 2020
Gcp High Rise Ricardo Gomez Angel 6 Lcdqr My Tji Unsplash
Tackling High-rise Concrete Construction Challenges
As architects design new high-rise buildings taller and with more complexity, producers are challenged to deliver ready-mix concrete that can be pumped, placed, and finished effectively for these structures.
October 9, 2020
The One South First (Domino Sugar) project was a 42-story commerical/residential building featuring punched window openings - demonstrating an important advancement in the use of 3D-printed forms.
The Winner of the PCI Sidney Freedman Craftsmanship Award
The Precast/Prestressed Concrete Institute announced the winner of the ninth annual Sidney Freedman Craftsmanship Award - The Gate Precast Company for Domino Sugar (New York City) project
October 9, 2020
Random cracks in reinforced slabs caused by thermal contraction and drying shrinkage are not longitudinal cracks and typically do not increase the risk of reinforcement corrosion in concrete.
Two Theories Related to Cracks and Rebar Corrosion
March 16, 2015
GPRS operators using the GSSI StructureScan Mini at Yankee Stadium
Ground-penetrating Radar Helps Map Precise Utility Location
For this reason, construction firms have come around to the notion that concrete scanning is vital to jobsite safety and efficiency.
October 7, 2020
Ligchine Screedsaver Elite
Ligchine Introduces the SCREEDSAVER ELITE
The SCREEDSAVER ELITE is Ligchine’s newest laser-guided concrete screed machine to join the SCREEDSAVER line of innovative, labor-saving machines.
October 5, 2020
The Carmix 3500 TC mobile concrete batching plant.
The Carmix 3500 TC gets US Citizenship
The Carmix 3500 TC machine has recently qualified in the US as the first mobile concrete batching plant with NS-001 certification for direct use in public works.
October 5, 2020
Rodding on the top layer of a concrete cylinder.
Testing Concrete With the Maturity Method
During the last few decades of significant progress for concrete, today’s most widely used compressive strength standard emerged: the cylinder concrete break tests.
October 3, 2020
Only OSHA Approved Safety Cap for COLUMN BASES & STEEL STAKES
Sponsored
Only OSHA Approved Safety Cap for COLUMN BASES & STEEL STAKES
Prevent Injuries & Impalement on Jobsites. Learn More
October 13, 2020
HUS Bridge Hospital, Finland received The Best Public Project award.
Trimble Announces Tekla 2020 Global BIM Awards Winners
The Tekla Global BIM Awards have welcomed projects that exhibit innovation and push the boundaries of structural engineering and BIM.
October 1, 2020
When removing wooden floors, contractors should use a scarifier equipped with a cutting blade to make cuts across the surface.
How Does It Come Off? Tips and Tricks for Hard Goods Flooring Removal
Hard goods such as wood, laminate flooring, ceramic tiles and quarry tiles are usually applied directly to a concrete floor using adhesives.
September 30, 2020
Skudo Commercial System.
Skudo Commercial System
The Skudo Commercial System is ideal to protect surfaces from construction site damages and spills on large commercial projects.
September 29, 2020
Terracon Stage 1 Site Selection Tool.
Terracon Stage 1 Site Selection Tool
Stage1 combines Terracon’s project data with environmental and geologic data sources from more than 700 public and private map sources for remote, site-specific research.
September 29, 2020
Bobcat Features On Demand.
Bobcat Features On Demand
Features On Demand allows operators to purchase a Bobcat skid-steer or compact track loader with certain features enabled at the point of sale, plus the ability to turn on other machine features after the initial sale without significant cost or machine u
September 28, 2020
Simpson Strong-Tie FX-70-6FS Fast-Set Epoxy Bottom Seal.
Simpson Strong-Tie FX-70-6FS Fast-Set Epoxy Bottom Seal
The FX-70-6FS fast-set epoxy bottom seal is a three-component, moisture-tolerant epoxy grout designed as part of the FX-70 structural repair and protection system to facilitate same-day filling of underwater fiberglass pile jackets.
September 28, 2020
Ulma Form-Works Stripping Corner Max.
Ulma Form-Works Stripping Corner Max
The Stripping Corner Max simplifies wall formwork erection and stripping in elevator shafts or stairwells, hollow piers, or any other interior wall type.
September 28, 2020
P824 Extrutech FORM Wall System.
P824 Extrutech FORM Wall System
Extrutech 8-in. thick panel is a "stay-in-place" form for concrete poured structural walls.
September 28, 2020
Advance Concrete Form Stakeless Footing System
Advance Concrete Form Stakeless Footing System
The Advance Concrete Form Stakeless Footing System system allows work in various soil conditions including sandy, clay, shale or rock.
September 25, 2020
Atkins North America, Inc. designed a robust 5,600-ft. stormwater management system using reinforced concrete pipe (RCP) and elliptical reinforced concrete pipe (ERCP) from Rinker Materials capable of handling future major flood events.
Reinforced Concrete Pipe Installed in Reno Stormwater System
Following engineering analysis to confirm shortcomings with the existing drainage, Atkins North America designed a 5,600-ft. stormwater management system using reinforced concrete pipe and elliptical reinforced concrete pipe in Reno, Nevada.
September 23, 2020
Graco LazerVac 550 Vacuum System.
Graco LazerVac 550 Vacuum System
When used with a GrindLazer scarifier, Graco’s LazerVac 550 System uses contactor preferred Honda power to provide 50% more vacuum pressure compared to LazerVac 330 to reduce airborne silica dust on larger scarifying jobs.
September 24, 2020